Return to fsinstall CVS log

Up to [Development] / failsafe / FailSafe / build

Initial checkin

#!/bin/sh
#                                                                         
# Copyright (c) 2000 Silicon Graphics, Inc.  All Rights Reserved.
# 
# This program is free software; you can redistribute it and/or modify
# it under the terms of version 2 of the GNU General Public License as
# published by the Free Software Foundation.
# 
# This program is distributed in the hope that it would be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# 
# Further, this software is distributed without any warranty that it is
# free of the rightful claim of any third person regarding infringement
# or the like.  Any license provided herein, whether implied or
# otherwise, applies only to this software file.  Patent licenses, if
# any, provided herein do not apply to combinations of this program with
# other software, or any other product whatsoever.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
#            
# Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
# Mountain View, CA 94043, or:
#            
# http://www.sgi.com 
#            
# For further information regarding this notice, see: 
#            
# http://oss.sgi.com/projects/GenInfo/NoticeExplan

#
# fsinstall
#
# Linux FailSafe Installation Script
#
# Args:
#	$1	location of the Linux FailSafe bin RPMS (optional)
#
#
#

# List of Rpms to be installed (order matters)
FS_RPMS_LIST="cluster_admin cluster_services failsafe"

# Default value for location of the FailSafe bin RPMS
FS_RPMS_DIR=./dist/RPMS/i386

# List of external packages that MUST be installed for running Linux FS
RPMS_REQUIRED="sysadm_base-lib"

# List of tools that MUST be installed for running Linux FS
TOOLS_REQUIRED="/sbin/portmap"

# Misc ports used by Linux FailSafe daemons.
# These ports are used to update /etc/services
CMSD_PORT=17000
CRSD_PORT=17001
GCD_PORT=17002
CAD_PORT=17003


# Filenames used to determine on which distribution
# Linux FailSafe is being installed.
# Currently only SuSE and RH are detected.
SUSE_DISTRIB_ID=/etc/SuSE-release
RH_DISTRIB_ID=/etc/redhat-release

# Path for some Linux FailSafe tools
FS_BIN_DIR=/usr/lib/failsafe/bin

#
# usage
#
# Print usage for fsinstall on stdout
#
# Args:
#	None
#
function usage()
{
  echo -e "\nUsage: $0 [rpm_dir]\n"
  echo -e "\trpm_dir: location of the binary rpms to be installed.\n"
  return 0
}

#
# fatal_error
#
# Exit from script in error
#
# Args:
#	$1	error description
#
function fatal_error()
{
  echo "Fatal Error: $1"
  echo "Exiting from fsinstall."
  exit -1
}

#
# check_package_is_installed()
#
# Check that an rpm package is correctly installed
#
# Args:
#	$1 package name
#
# Return value:
#	0 if success
#	exit from script in case of failure
#
function check_package_is_installed()
{
  echo -e "  Package $1\t\t\c"
  rpm -q $1  > /dev/null 2>&1
  if [ $? != 0 ]
  then
	echo -e "	[ NOK ]"
	fatal_error "Package $1 not found."
  else
	echo -e "	[ OK ]"
	return 0
  fi
}


#
# check_tool_is_installed()
#
# Check that a file is installed on the local machine
#
# Args:
#	$1	Directory/filename
#
# Return value:
#	0  if success
#	exit from script in case of failure
#
function check_file_is_installed()
{
   echo -e "  File $1\t\t\c"
   if [ ! -f $1 ]; then
	which `basename $1`
	if [ $? -ne 0 ]; then
	   echo -e "	[ NOK ]"
	   fatal_error "File $1 not found."
 	fi
   fi

   echo -e "	[ OK ]"
   return 0
}


#
# create_init_level_symlink
#
# Create symlink in init runlevel directories
#
# Args:
#	$1	script name
#	$2	run level
#	$3	order = [S|K][0..9][0..9]
#
# Return value:
#	0  if success
#	-1 in case of failure
#
# Ex.:
#	create_init_level_symlink myscript 2 S25
#
function create_init_level_symlink()
{
  echo "  Creating link /etc/rc.d/rc$2.d/$3$1"
  cd /etc/rc.d/rc$2.d

  # if link doesn't already exist, create it.
  if [ ! -f $3$1 ]
  then
    ln -s ../init.d/$1 $3$1
  fi
  cd -

  return 0
}

#
# add_service
#
# Add an entry in /etc/services file
#
# Args:
#	$1	service name
#	$2	port number
#	$3	protocol type
#	$4	optional comment
#
# Return value:
#	0 if success
#	exit from script in case of failure
#
# Ex.:
#	add_service myservice 7000 tcp
#
function add_service()
{
  # check service is not already defined
  grep $1 /etc/services >/dev/null 2>&1
  if [ $? != 0 ]
  then
    echo "  Adding service $1, port $2, protocol $3 to /etc/services"

    # check port is not already assigned
    grep "\W$2\/" /etc/services  >/dev/null 2>&1
    if [ $? = 0 ]
    then
	echo "  Conflict: port $2 already assigned."
	echo "  Modify the fsinstall script to use a "
	echo "  different port number than $2 for service $1"
	echo "  Make sure port number are consistent across your cluster."
	fatal_error "Port number conflict in /etc/services."
    else
	# Add line in /etc/services
        echo -e "$1\t$2/$3\t# $4" >> /etc/services
    fi
  else
    # check port is the same
    entry=`grep $1 /etc/services`
    echo ${entry} | grep "\W$2\/" >/dev/null 2>&1 
    if [ $? != 0 ]
    then
	echo "  Service $1 already defined in /etc/service but with a different port number"
	echo "  Clean-up your /etc/services file and re-execute fsinstall."
	fatal_error "Port number inconsistency in /etc/services."
    else
	echo "  Service $1 was already defined in /etc/service with port $2"
    fi
  fi

  return 0
}



#################
#		#
#    MAIN	#
#		#
#################

if [ $# -gt 1 ]; then
  usage
  fatal_error "Bad usage."
fi

echo -e "\n**** FailSafe Installation BEGIN ****\n"

# Checking rpms and misc files required by Linux FailSafe are installed
#
# NOTE: These checks could be done by the rpm themselves.
# this should be an improvement in the next release...
#
echo -e "**** Checking prerequisite..."
for rpm in ${RPMS_REQUIRED}; do
	check_package_is_installed ${rpm}
done

for file in ${TOOLS_REQUIRED}; do
	check_file_is_installed ${file}
done
echo -e "**** Checking prerequisite {OK}"

# First Update /etc/services file
echo -e "**** Updating /etc/services file..."
add_service "sgi-cmsd" ${CMSD_PORT} udp "Cluster membership services daemon"
add_service "sgi-crsd" ${CRSD_PORT} udp "Cluster reset services daemon"
add_service "sgi-gcd " ${GCD_PORT}  udp "SGI Group membership daemon"
add_service "sgi-cad " ${CAD_PORT}  tcp "Cluster Admin daemon"

echo -e "\n/etc/services update OK\n"


# Install RPMS
echo -e "\n**** Installing RPMs...\n"

if [ -n "$1" ]; then
   rpms_dir=$1
else
   echo -e "Location of the FailSafe binary rpms to be installed:"
   echo -e "Default is [${FS_RPMS_DIR}]"
   echo -e " Give location or type Enter for default value ?"
   read rpms_dir
   if [ ! -n "${rpms_dir}" ] ; then
      rpms_dir=${FS_RPMS_DIR}
   fi
fi

if [ ! -d ${rpms_dir} ]; then
	fatal_error "Directory ${rpms_dir} does not exist."
fi

for rpm in ${FS_RPMS_LIST}
do
  echo "  Installing RPM ${rpm}"
  if (rpm -q ${rpm} > /dev/null 2>&1) ; then
        echo "  (${rpm} already installed ..... skipping ${rpm})"
        continue
  fi
  rpm -ivh --nodeps ${rpms_dir}/${rpm}*
done

echo -e "\nRPMs installation OK\n"


# Check if cluster_admin, cluster_services & failsafe packages are installed
echo -e "\n**** Checking packages installation...\n"
check_package_is_installed cluster_admin
check_package_is_installed cluster_services
check_package_is_installed failsafe

echo -e "\nRPM installation check OK\n"



echo -e "\n**** Updating startup flags...\n"
# Enable fs_cluster application
${FS_BIN_DIR}/fsconfig fs_cluster on

# Disable failsafe application (enabled by cmond)
${FS_BIN_DIR}/fsconfig failsafe off

echo -e "\nStartup flags update OK\n"



# Create symlinks in init level directories to start
# cluster and failsafe at boot time
echo -e "\n**** Creating links in init level directories...\n"
if [ -f ${SUSE_DISTRIB_ID} ]
then
  echo "SuSE distribution detected."
  level_text=2
  level_x=3
elif [ -f ${RH_DISTRIB_ID} ]
then
  echo "RedHat distribution detected."
  level_text=3
  level_x=5
else
  echo "Your linux distribution is neither RH nor SuSE"

  echo "Give run level for multi-user/text  (default 2) ?"
  read level_text
  if [ -n "${level_text}" ]
  then
	level_text=2
  fi

  echo "Give run level for multi-user/X11 (default 3) ?"
  read level_x
  if [ -n "${level_x}" ]
  then
	level_x=3
  fi
fi

# Create links in init level ${level_text} (Multi-user, text)
create_init_level_symlink fs_cluster  	${level_text} S36
create_init_level_symlink fs_cluster  	${level_text} K39
create_init_level_symlink failsafe 	${level_text} S37
create_init_level_symlink failsafe 	${level_text} K37

# Create links in init level ${level_x} (Multi-user, X11)
create_init_level_symlink fs_cluster  	${level_x} S36
create_init_level_symlink fs_cluster  	${level_x} K39
create_init_level_symlink failsafe 	${level_x} S37
create_init_level_symlink failsafe 	${level_x} K37

echo -e "\n Links creation OK\n"


echo -e "\n**** Creating an empty database...\n"
/usr/sbin/cdbreinit

echo -e "\n**** FailSafe Installation DONE ****\n"