xfs
[Top] [All Lists]

[PATCH 4/6] xfstests: Add fallocate zero range operation to fsx

To: linux-ext4@xxxxxxxxxxxxxxx
Subject: [PATCH 4/6] xfstests: Add fallocate zero range operation to fsx
From: Lukas Czerner <lczerner@xxxxxxxxxx>
Date: Tue, 25 Feb 2014 20:15:26 +0100
Cc: xfs@xxxxxxxxxxx, linux-fsdevel@xxxxxxxxxxxxxxx, Lukas Czerner <lczerner@xxxxxxxxxx>
Delivered-to: xfs@xxxxxxxxxxx
In-reply-to: <1393355728-12056-1-git-send-email-lczerner@xxxxxxxxxx>
References: <1393355728-12056-1-git-send-email-lczerner@xxxxxxxxxx>
Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
---
 ltp/fsx.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 3 deletions(-)

diff --git a/ltp/fsx.c b/ltp/fsx.c
index 2f1e3e8..b3c30db 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -72,6 +72,7 @@ int                   logcount = 0;   /* total ops */
  * TRUNCATE:   -       4
  * FALLOCATE:  -       5
  * PUNCH HOLE: -       6
+ * ZERO RANGE: -       7
  *
  * When mapped read/writes are disabled, they are simply converted to normal
  * reads and writes. When fallocate/fpunch calls are disabled, they are
@@ -95,7 +96,8 @@ int                   logcount = 0;   /* total ops */
 #define OP_TRUNCATE    4
 #define OP_FALLOCATE   5
 #define OP_PUNCH_HOLE  6
-#define OP_MAX_FULL    7
+#define OP_ZERO_RANGE  7
+#define OP_MAX_FULL    8
 
 /* operation modifiers */
 #define OP_CLOSEOPEN   100
@@ -142,6 +144,7 @@ int seed = 1;                       /* -S flag */
 int     mapped_writes = 1;              /* -W flag disables */
 int     fallocate_calls = 1;            /* -F flag disables */
 int     punch_hole_calls = 1;           /* -H flag disables */
+int     zero_range_calls = 1;           /* -E flag disables */
 int    mapped_reads = 1;               /* -R flag disables it */
 int    fsxgoodfd = 0;
 int    o_direct;                       /* -Z */
@@ -320,6 +323,14 @@ logdump(void)
                                                     lp->args[0] + lp->args[1])
                                prt("\t******PPPP");
                        break;
+               case OP_ZERO_RANGE:
+                       prt("ZERO    0x%x thru 0x%x\t(0x%x bytes)",
+                           lp->args[0], lp->args[0] + lp->args[1] - 1,
+                           lp->args[1]);
+                       if (badoff >= lp->args[0] && badoff <
+                                                    lp->args[0] + lp->args[1])
+                               prt("\t******ZZZZ");
+                       break;
                case OP_SKIPPED:
                        prt("SKIPPED (no operation)");
                        break;
@@ -882,6 +893,64 @@ do_punch_hole(unsigned offset, unsigned length)
 }
 #endif
 
+#ifdef FALLOC_FL_ZERO_RANGE
+void
+do_zero_range(unsigned offset, unsigned length)
+{
+       unsigned end_offset;
+       int max_offset = 0;
+       int max_len = 0;
+       int mode = FALLOC_FL_ZERO_RANGE;
+
+       if (length == 0) {
+               if (!quiet && testcalls > simulatedopcount)
+                       prt("skipping zero length zero range\n");
+                       log4(OP_SKIPPED, OP_ZERO_RANGE, offset, length);
+               return;
+       }
+
+       if (file_size <= (loff_t)offset) {
+               if (!quiet && testcalls > simulatedopcount)
+                       prt("skipping zero range off the end of the file\n");
+                       log4(OP_SKIPPED, OP_ZERO_RANGE, offset, length);
+               return;
+       }
+
+       end_offset = offset + length;
+
+       log4(OP_ZERO_RANGE, offset, length, 0);
+
+       if (testcalls <= simulatedopcount)
+               return;
+
+       if ((progressinterval && testcalls % progressinterval == 0) ||
+           (debug && (monitorstart == -1 || monitorend == -1 ||
+                     end_offset <= monitorend))) {
+               prt("%lu zero\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+                       offset, offset+length, length);
+       }
+       if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
+               prt("%pzero range: %x to %x\n", offset, length);
+               prterr("do_zero_range: fallocate");
+               report_failure(161);
+       }
+
+
+       max_offset = offset < file_size ? offset : file_size;
+       max_len = max_offset + length <= file_size ? length :
+                       file_size - max_offset;
+       memset(good_buf + max_offset, '\0', max_len);
+}
+
+#else
+void
+do_zero_range(unsigned offset, unsigned length)
+{
+       return;
+}
+#endif
+
+
 #ifdef FALLOCATE
 /* fallocate is basically a no-op unless extending, then a lot like a truncate 
*/
 void
@@ -1050,6 +1119,12 @@ test(void)
                        goto out;
                }
                break;
+       case OP_ZERO_RANGE:
+               if (!zero_range_calls) {
+                       log4(OP_SKIPPED, OP_ZERO_RANGE, offset, size);
+                       goto out;
+               }
+               break;
        }
 
        switch (op) {
@@ -1088,6 +1163,10 @@ test(void)
                TRIM_OFF_LEN(offset, size, file_size);
                do_punch_hole(offset, size);
                break;
+       case OP_ZERO_RANGE:
+               TRIM_OFF_LEN(offset, size, file_size);
+               do_zero_range(offset, size);
+               break;
        default:
                prterr("test: unknown operation");
                report_failure(42);
@@ -1143,7 +1222,10 @@ usage(void)
 "      -F: Do not use fallocate (preallocation) calls\n"
 #endif
 #ifdef FALLOC_FL_PUNCH_HOLE
-"       -H: Do not use punch hole calls\n"
+"      -H: Do not use punch hole calls\n"
+#endif
+#ifdef FALLOC_FL_ZERO_RANGE
+"      -E: Do not use zero range calls\n"
 #endif
 "      -L: fsxLite - no file creations & no file size changes\n\
        -N numops: total # operations to do (default infinity)\n\
@@ -1330,6 +1412,24 @@ test_punch_hole()
 #endif
 }
 
+void
+test_zero_range()
+{
+#ifdef FALLOC_FL_ZERO_RANGE
+       if (!lite && zero_range_calls) {
+               if (fallocate(fd, FALLOC_FL_ZERO_RANGE,
+                               0, 1) && errno == EOPNOTSUPP) {
+                       if(!quiet)
+                               warn("main: filesystem does not support 
fallocate zero range, disabling");
+                       zero_range_calls = 0;
+               } else
+                       ftruncate(fd, 0);
+       }
+#else /* ! ZERO RANGE */
+       zero_range_calls = 0;
+#endif
+}
+
 int
 main(int argc, char **argv)
 {
@@ -1348,7 +1448,7 @@ main(int argc, char **argv)
 
        setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
 
-       while ((ch = getopt(argc, argv, 
"b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHLN:OP:RS:WZ"))
+       while ((ch = getopt(argc, argv, 
"b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHELN:OP:RS:WZ"))
               != EOF)
                switch (ch) {
                case 'b':
@@ -1448,6 +1548,9 @@ main(int argc, char **argv)
                case 'H':
                        punch_hole_calls = 0;
                        break;
+               case 'E':
+                       zero_range_calls = 0;
+                       break;
                case 'L':
                        lite = 1;
                        break;
@@ -1595,6 +1698,7 @@ main(int argc, char **argv)
 
        test_fallocate();
        test_punch_hole();
+       test_zero_range();
 
        while (numops == -1 || numops--)
                test();
-- 
1.8.3.1

<Prev in Thread] Current Thread [Next in Thread>