Re: Not being able to recover a RAID 5 20 Tb partition, help needed

["Juan A. Sillero" <juan.sillero@xxxxxxxxx>]

Hello Emmanuel,

The disk controller are QLogic:

04:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI 
Express HBA (rev 02)
04:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI 
Express HBA (rev 02)
05:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI 
Express HBA (rev 03)
05:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI 
Express HBA (rev 03)

06:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s 
- IB QDR / 10GigE] (rev b0)


Thanks again,

Juan

On Jan 29, 2014, at 6:42 PM, Emmanuel Florac <eflorac@xxxxxxxxxxxxxx> wrote:

> Le Wed, 29 Jan 2014 17:54:08 +0100
> "Juan A. Sillero" <sillero@xxxxxxxxxxxxxxxxxx> écrivait:
> 
>> We'd like to know your opinion about what to do next. The data is
>> still probably on the disks, but the RAID topology is gone.  We'd
>> also like to know if someone has experienced a similar hardware
>> problem that could give us some advice.
> 
> I tought it was a dmraid raid 5 device? If it's a RAID controller, what
> brand/model is it? 
> 
> At this point you could give a try to UFS Explorer.
> 
> -- 
> ------------------------------------------------------------------------
> Emmanuel Florac     |   Direction technique
>                    |   Intellique
>                    |  <eflorac@xxxxxxxxxxxxxx>
>                    |   +33 1 78 94 84 02
> ------------------------------------------------------------------------