On 10/18/13 1:26 PM, Josef Bacik wrote:
> I recently added a patch to avoid sending holes with btrfs send, but I screwed
> it up by not sending a hole when we did a hole punch. This is an xfstest
> version of the test I wrote to show that I had a bug and to verify I was
> fixing
> it properly. This test properly fails with my old patch and passes with my
> good
> patch. Thanks,
>
> Signed-off-by: Josef Bacik <jbacik@xxxxxxxxxxxx>
Reviewed-by: Eric Sandeen <sandeen@xxxxxxxxxx>
> ---
> tests/btrfs/016 | 100
> ++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/016.out | 2 ++
> tests/btrfs/group | 1 +
> 3 files changed, 103 insertions(+)
> create mode 100644 tests/btrfs/016
> create mode 100644 tests/btrfs/016.out
>
> diff --git a/tests/btrfs/016 b/tests/btrfs/016
> new file mode 100644
> index 0000000..d711ecb
> --- /dev/null
> +++ b/tests/btrfs/016
> @@ -0,0 +1,100 @@
> +#! /bin/bash
> +# FS QA Test No. btrfs/016
> +#
> +# btrfs send hole punch test
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2013 Fusion IO. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=`mktemp -d`
> +tmp_dir=send_temp_$seq
> +
> +status=1 # failure is the default!
> +
> +_cleanup()
> +{
> + $BTRFS_UTIL_PROG subvol del $TEST_DIR/$tmp_dir/snap > /dev/null 2>&1
> + $BTRFS_UTIL_PROG subvol del $TEST_DIR/$tmp_dir/snap1 > /dev/null 2>&1
> + $BTRFS_UTIL_PROG subvol del $TEST_DIR/$tmp_dir/send > /dev/null 2>&1
> + rm -rf $TEST_DIR/$tmp_dir
> + rm -f $tmp.*
> +}
> +
> +trap "_cleanup ; exit \$status" 0 1 2 3 15
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +
> +FSSUM_PROG=$here/src/fssum
> +[ -x $FSSUM_PROG ] || _notrun "fssum not built"
> +
> +_scratch_mkfs > /dev/null 2>&1
> +
> +#receive needs to be able to setxattrs, including the selinux context, if we
> use
> +#the normal nfs context thing it screws up our ability to set the
> +#security.selinux xattrs so we need to disable this for this test
> +export SELINUX_MOUNT_OPTIONS=""
> +
> +_scratch_mount
> +
> +mkdir $TEST_DIR/$tmp_dir
> +$BTRFS_UTIL_PROG subvol create $TEST_DIR/$tmp_dir/send \
> + > $seqres.full 2>&1 || _fail "failed subvol create"
> +
> +dd if=/dev/urandom of=$TEST_DIR/$tmp_dir/send/foo bs=1M count=10 >>
> $seqres.full \
> + 2>&1 || _fail "dd failed"
> +$BTRFS_UTIL_PROG subvol snap -r $TEST_DIR/$tmp_dir/send \
> + $TEST_DIR/$tmp_dir/snap >> $seqres.full 2>&1 || _fail "failed snap"
> +$XFS_IO_PROG -c "fpunch 1m 1m" $TEST_DIR/$tmp_dir/send/foo
> +$BTRFS_UTIL_PROG subvol snap -r $TEST_DIR/$tmp_dir/send \
> + $TEST_DIR/$tmp_dir/snap1 >> $seqres.full 2>&1 || _fail "failed snap"
> +
> +$FSSUM_PROG -A -f -w $tmp/fssum.snap $TEST_DIR/$tmp_dir/snap >> $seqres.full
> \
> + 2>&1 || _fail "fssum gen failed"
> +$FSSUM_PROG -A -f -w $tmp/fssum.snap1 $TEST_DIR/$tmp_dir/snap1 >>
> $seqres.full \
> + 2>&1 || _fail "fssum gen failed"
> +
> +$BTRFS_UTIL_PROG send $TEST_DIR/$tmp_dir/snap -f $tmp/send.snap >> \
> + $seqres.full 2>&1 || _fail "failed send"
> +$BTRFS_UTIL_PROG send $TEST_DIR/$tmp_dir/snap1 -p $TEST_DIR/$tmp_dir/snap \
> + -f $tmp/send.snap1 >> $seqres.full 2>&1 || _fail "failed send"
> +
> +$BTRFS_UTIL_PROG receive -f $tmp/send.snap $SCRATCH_MNT >> $seqres.full 2>&1
> \
> + || _fail "failed recv"
> +$BTRFS_UTIL_PROG receive -f $tmp/send.snap1 $SCRATCH_MNT >> $seqres.full
> 2>&1 \
> + || _fail "failed recv"
> +
> +$FSSUM_PROG -r $tmp/fssum.snap $SCRATCH_MNT/snap >> $seqres.full 2>&1 \
> + || _fail "fssum failed"
> +$FSSUM_PROG -r $tmp/fssum.snap1 $SCRATCH_MNT/snap1 >> $seqres.full 2>&1 \
> + || _fail "fssum failed"
> +
> +echo "Silence is golden"
> +status=0 ; exit
> diff --git a/tests/btrfs/016.out b/tests/btrfs/016.out
> new file mode 100644
> index 0000000..aa2526b
> --- /dev/null
> +++ b/tests/btrfs/016.out
> @@ -0,0 +1,2 @@
> +QA output created by 016
> +Silence is golden
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index a6f1820..082fd67 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -18,3 +18,4 @@
> 013 auto quick
> 014 auto
> 015 auto quick
> +016 auto quick
>
|