From: Dave Chinner <dchinner@xxxxxxxxxx>
Some tests 'cd <somedir>' and then direct output to $RESULT_DIR,
which fails if the current working directory is not $here.
Regardless, if an external results directory is to be used it needs
to have a full path specified and the use of $here as the base of
the results files is completely incorrect.
Hence change all the $here/$seqres* references to simply be
$seqres*, and instead encode the full path to the results in
$RESULT_DIR.
Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
check | 55 ++++++++++++-----------------
common/attr | 4 +--
common/defrag | 4 +--
common/dump | 86 ++++++++++++++++++++++-----------------------
common/filestreams | 4 +--
common/log | 36 +++++++++----------
common/quota | 18 +++++-----
common/rc | 98 ++++++++++++++++++++++++++--------------------------
common/scsi_debug | 2 +-
tests/generic/001 | 8 ++---
tests/generic/010 | 2 +-
tests/generic/013 | 12 +++----
tests/generic/074 | 2 +-
tests/generic/075 | 10 +++---
tests/generic/089 | 4 +--
tests/generic/100 | 8 ++---
tests/generic/112 | 4 +--
tests/generic/192 | 2 +-
tests/generic/232 | 8 ++---
tests/generic/233 | 8 ++---
tests/generic/269 | 4 +--
tests/generic/270 | 4 +--
tests/shared/305 | 12 +++----
tests/xfs/008 | 18 +++++-----
tests/xfs/012 | 30 ++++++++--------
tests/xfs/024 | 4 +--
tests/xfs/067 | 6 ++--
tests/xfs/114 | 30 ++++++++--------
tests/xfs/115 | 8 ++---
tests/xfs/168 | 2 +-
tests/xfs/186 | 4 +--
tests/xfs/282 | 4 +--
tests/xfs/283 | 4 +--
33 files changed, 247 insertions(+), 258 deletions(-)
diff --git a/check b/check
index 17bc004..18cae75 100755
--- a/check
+++ b/check
@@ -36,25 +36,38 @@ here=`pwd`
FSTYP=xfs
xfile=""
-SUPPORTED_TESTS="[0-9][0-9][0-9] [0-9][0-9][0-9][0-9]"
-SRC_GROUPS="generic shared"
-export SRC_DIR="tests"
-export RESULT_BASE=${RESULT_BASE:="results"}
-
-# generic initialization
+# start the initialisation work now
iam=check
+export MSGVERB="text:action"
export QA_CHECK_FS=${QA_CHECK_FS:=true}
-# by default don't output timestamps
-timestamp=${TIMESTAMP:=false}
-
# number of diff lines from a failed test, 0 for whole output
export DIFF_LENGTH=${DIFF_LENGTH:=10}
# by default don't output timestamps
timestamp=${TIMESTAMP:=false}
+rm -f $tmp.list $tmp.tmp $tmp.grep $here/$iam.out $tmp.xlist
+
+# Autodetect fs type based on what's on $TEST_DEV
+if [ "$HOSTOS" == "Linux" ]; then
+ FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
+fi
+export FSTYP
+
+# we need common.config
+if ! . ./common/config
+then
+ echo "$iam: failed to source common/config"
+ exit 1
+fi
+
+SUPPORTED_TESTS="[0-9][0-9][0-9] [0-9][0-9][0-9][0-9]"
+SRC_GROUPS="generic shared"
+export SRC_DIR="tests"
+export RESULT_BASE=${RESULT_BASE:="$here/results"}
+
usage()
{
echo "Usage: $0 [options] [testlist]"'
@@ -79,12 +92,6 @@ testlist options
exit 0
}
-_setenvironment()
-{
- MSGVERB="text:action"
- export MSGVERB
-}
-
get_group_list()
{
grp=$1
@@ -147,24 +154,6 @@ _timestamp()
echo -n " [$now]"
}
-# start the initialisation work now
-_setenvironment
-
-rm -f $tmp.list $tmp.tmp $tmp.grep $here/$iam.out $tmp.xlist
-
-# Autodetect fs type based on what's on $TEST_DEV
-if [ "$HOSTOS" == "Linux" ]; then
- FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
-fi
-export FSTYP
-
-# we need common.config
-if ! . ./common/config
-then
- echo "$iam: failed to source common/config"
- exit 1
-fi
-
# Process command arguments first.
while [ $# -gt 0 ]; do
case "$1" in
diff --git a/common/attr b/common/attr
index 69bcb01..e5070bf 100644
--- a/common/attr
+++ b/common/attr
@@ -129,7 +129,7 @@ _require_acls()
#
touch $TEST_DIR/syscalltest
chacl -l $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
- cat $TEST_DIR/syscalltest.out >> $RESULT_DIR/$seq.full
+ cat $TEST_DIR/syscalltest.out >> $seqres.full
if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
_notrun "kernel does not support ACLs"
@@ -164,7 +164,7 @@ _require_attrs()
#
touch $TEST_DIR/syscalltest
attr -s "user.xfstests" -V "attr" $TEST_DIR > $TEST_DIR/syscalltest.out
2>&1
- cat $TEST_DIR/syscalltest.out >> $RESULT_DIR/$seq.full
+ cat $TEST_DIR/syscalltest.out >> $seqres.full
if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
_notrun "kernel does not support attrs"
diff --git a/common/defrag b/common/defrag
index 13405a4..f04fd42 100644
--- a/common/defrag
+++ b/common/defrag
@@ -44,7 +44,7 @@ _require_defrag()
_extent_count()
{
$FILEFRAG_PROG $1 | awk '{print $2}'
- $FILEFRAG_PROG -v $1 >> $RESULT_DIR/$seq.full 2>&1
+ $FILEFRAG_PROG -v $1 >> $seqres.full 2>&1
}
# Defrag file, check it, and remove it.
@@ -54,7 +54,7 @@ _defrag()
_extent_count $1
CSUM_BEFORE=`md5sum $1`
STAT_BEFORE=`stat -c "a: %x m: %y c: %z" $1`
- $DEFRAG_PROG -v $1 >> $RESULT_DIR/$seq.full 2>&1
+ $DEFRAG_PROG -v $1 >> $seqres.full 2>&1
_scratch_remount
STAT_AFTER=`stat -c "a: %x m: %y c: %z" $1`
CSUM_AFTER=`md5sum $1`
diff --git a/common/dump b/common/dump
index 0395ee3..3df6191 100644
--- a/common/dump
+++ b/common/dump
@@ -20,7 +20,7 @@
#
# --- initializations ---
-rm -f $RESULT_DIR/$seq.full
+rm -f $seqres.full
if [ -n "$DEBUGDUMP" ]; then
_dump_debug=-v4
@@ -125,7 +125,7 @@ _check_onl()
_limit=10
i=0
while [ $i -lt $_limit ]; do
- echo "Checking online..." >>$RESULT_DIR/$seq.full
+ echo "Checking online..." >>$seqres.full
if _mt status >$tmp.status 2>&1; then
break;
else
@@ -159,12 +159,12 @@ _check_onl()
_wait_tape()
{
- echo "Wait for tape, $dumptape, ..." >>$RESULT_DIR/$seq.full
+ echo "Wait for tape, $dumptape, ..." >>$seqres.full
i=0
while [ $i -lt 20 ]; do
- echo "Checking status..." >>$RESULT_DIR/$seq.full
- if _mt status 2>&1 | tee -a $RESULT_DIR/$seq.full | egrep -i
"onl|ready" >/dev/null; then
+ echo "Checking status..." >>$seqres.full
+ if _mt status 2>&1 | tee -a $seqres.full | egrep -i "onl|ready"
>/dev/null; then
break;
else
sleep 1
@@ -178,7 +178,7 @@ _wait_tape()
#
_rewind()
{
- echo "Initiate rewind..." >>$RESULT_DIR/$seq.full
+ echo "Initiate rewind..." >>$seqres.full
_wait_tape
_mt rewind >/dev/null
_wait_tape
@@ -191,7 +191,7 @@ _rewind()
#
_erase_soft()
{
- echo "Erasing tape" | tee -a $RESULT_DIR/$seq.full
+ echo "Erasing tape" | tee -a $seqres.full
_rewind
_mt weof 3
_rewind
@@ -199,7 +199,7 @@ _erase_soft()
_erase_hard()
{
- echo "Erasing tape" | tee -a $RESULT_DIR/$seq.full
+ echo "Erasing tape" | tee -a $seqres.full
_mt erase
}
@@ -230,7 +230,7 @@ _require_tape()
if [ -z "$dumptape" -o "@" == "$dumptape" ]; then
echo "This test requires a dump tape - none was specified"
- echo "No dump tape specified" >$RESULT_DIR/$seq.notrun
+ echo "No dump tape specified" >$seqres.notrun
status=$NOTRUNSTS
exit
fi
@@ -243,8 +243,8 @@ _wipe_fs()
{
_require_scratch
- _scratch_mkfs_xfs >>$RESULT_DIR/$seq.full || _fail "mkfs failed"
- _scratch_mount >>$RESULT_DIR/$seq.full || _fail "mount failed"
+ _scratch_mkfs_xfs >>$seqres.full || _fail "mkfs failed"
+ _scratch_mount >>$seqres.full || _fail "mount failed"
}
#
@@ -266,8 +266,8 @@ _cleanup()
# save it for inspection
for dir in /var/xfsdump/inventory /var/lib/xfsdump/inventory; do
[ -d $dir ] || continue
- tar -cvf $RESULT_DIR/$seq.inventory.tar $dir
- ls -nR $dir >$RESULT_DIR/$seq.inventory.ls
+ tar -cvf $seqres.inventory.tar $dir
+ ls -nR $dir >$seqres.inventory.ls
done
fi
@@ -295,8 +295,8 @@ _cleanup()
_stable_fs()
{
_saveddir=`pwd`; cd /
- umount $SCRATCH_MNT >>$RESULT_DIR/$seq.full || _fail "unmount failed"
- _scratch_mount >>$RESULT_DIR/$seq.full || _fail "mount failed"
+ umount $SCRATCH_MNT >>$seqres.full || _fail "unmount failed"
+ _scratch_mount >>$seqres.full || _fail "mount failed"
cd $_saveddir
}
@@ -326,12 +326,12 @@ _create_dumpdir_stress()
echo "-----------------------------------------------"
if ! $here/ltp/fsstress $_param -s 1 $FSSTRESS_AVOID -n $_count -d
$dump_dir >$tmp.out 2>&1
then
- echo " fsstress (count=$_count) returned $? - see
$RESULT_DIR/$seq.full"
+ echo " fsstress (count=$_count) returned $? - see $seqres.full"
- echo "--------------------------------------"
>>$RESULT_DIR/$seq.full
- echo "output from fsstress:"
>>$RESULT_DIR/$seq.full
- echo "--------------------------------------"
>>$RESULT_DIR/$seq.full
- cat $tmp.out
>>$RESULT_DIR/$seq.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "output from fsstress:" >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ cat $tmp.out >>$seqres.full
status=1
fi
@@ -1043,7 +1043,7 @@ _do_dump_sub()
echo "Dumping to tape..."
opts="$_dump_debug$dump_args -s $dump_sdir -f $dumptape -M $media_label -L
$session_label $SCRATCH_MNT"
echo "xfsdump $opts" | _dir_filter
- $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
#
@@ -1056,7 +1056,7 @@ _do_dump()
echo "Dumping to tape..."
opts="$_dump_debug$dump_args -f $dumptape -M $media_label -L
$session_label $SCRATCH_MNT"
echo "xfsdump $opts" | _dir_filter
- $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
@@ -1071,7 +1071,7 @@ _do_dump_min()
onemeg=1048576
opts="$_dump_debug$dump_args -m -b $onemeg -l0 -f $dumptape -M
$media_label -L $session_label $SCRATCH_MNT"
echo "xfsdump $opts" | _dir_filter
- $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
@@ -1085,7 +1085,7 @@ _do_dump_file()
echo "Dumping to file..."
opts="$_dump_debug$dump_args -f $dump_file -M $media_label -L
$session_label $SCRATCH_MNT"
echo "xfsdump $opts" | _dir_filter
- $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
#
@@ -1107,7 +1107,7 @@ _do_dump_multi_file()
echo "Dumping to files..."
opts="$_dump_debug$dump_args $multi_args -L $session_label $SCRATCH_MNT"
echo "xfsdump $opts" | _dir_filter
- $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
@@ -1140,7 +1140,7 @@ _do_restore()
echo "Restoring from tape..."
opts="$_restore_debug$restore_args -f $dumptape -L $session_label
$restore_dir"
echo "xfsrestore $opts" | _dir_filter
- $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
#
@@ -1155,7 +1155,7 @@ _do_restore_min()
onemeg=1048576
opts="$_restore_debug$restore_args -m -b $onemeg -f $dumptape -L
$session_label $restore_dir"
echo "xfsrestore $opts" | _dir_filter
- $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
#
@@ -1169,7 +1169,7 @@ _do_restore_file()
echo "Restoring from file..."
opts="$_restore_debug$restore_args -f $dump_file -L $session_label
$restore_dir"
echo "xfsrestore $opts" | _dir_filter
- $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
#
@@ -1184,7 +1184,7 @@ _do_restore_file_cum()
echo "Restoring cumumlative from file..."
opts="$_restore_debug$restore_args -f $dump_file -r $restore_dir"
echo "xfsrestore $opts" | _dir_filter
- $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
_do_restore_toc()
@@ -1195,7 +1195,7 @@ _do_restore_toc()
opts="$_restore_debug$restore_args -f $dump_file -t"
echo "xfsrestore $opts" | _dir_filter
cd $SCRATCH_MNT # for IRIX which needs xfs cwd
- $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full |
_dump_filter_main |\
+ $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter_main |\
_check_quota_file |\
_check_quota_entries |\
$AWK_PROG 'NF != 1 { print; next }
@@ -1226,7 +1226,7 @@ _do_restore_multi_file()
echo "Restoring from file..."
opts="$_restore_debug$restore_args $multi_args -L $session_label
$restore_dir"
echo "xfsrestore $opts" | _dir_filter
- $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}
#
@@ -1246,7 +1246,7 @@ _do_dump_restore()
restore_opts="$_restore_debug$restore_args - $restore_dir"
dump_opts="$_dump_debug$dump_args -s $dump_sdir - $SCRATCH_MNT"
echo "xfsdump $dump_opts | xfsrestore $restore_opts" | _dir_filter
- $XFSDUMP_PROG $dump_opts 2>$tmp.dump.mlog | $XFSRESTORE_PROG $restore_opts
2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
+ $XFSDUMP_PROG $dump_opts 2>$tmp.dump.mlog | $XFSRESTORE_PROG $restore_opts
2>&1 | tee -a $seqres.full | _dump_filter
_dump_filter <$tmp.dump.mlog
}
@@ -1262,8 +1262,8 @@ _ls_compare_sub()
# verify we got back what we dumped
#
echo "Comparing listing of dump directory with restore directory"
- ls -nR $dump_dir | tee -a $RESULT_DIR/$seq.full | _ls_filter >$tmp.dump_dir
- ls -nR $restore_dir/$dump_sdir | tee -a $RESULT_DIR/$seq.full | _ls_filter
\
+ ls -nR $dump_dir | tee -a $seqres.full | _ls_filter >$tmp.dump_dir
+ ls -nR $restore_dir/$dump_sdir | tee -a $seqres.full | _ls_filter \
| sed -e "s#$restore_sdir\/##" >$tmp.restore_dir
diff -bcs $tmp.dump_dir $tmp.restore_dir | sed -e "s#$tmp#TMP#g"
@@ -1285,8 +1285,8 @@ _ls_nodate_compare_sub()
# verify we got back what we dumped
#
echo "Comparing listing of dump directory with restore directory"
- ls -nR $dump_dir | tee -a $RESULT_DIR/$seq.full | _ls_filter |
_ls_nodate_filter >$tmp.dump_dir
- ls -nR $restore_dir/$dump_sdir | tee -a $RESULT_DIR/$seq.full | _ls_filter
\
+ ls -nR $dump_dir | tee -a $seqres.full | _ls_filter | _ls_nodate_filter
>$tmp.dump_dir
+ ls -nR $restore_dir/$dump_sdir | tee -a $seqres.full | _ls_filter \
| _ls_nodate_filter | sed -e "s#$restore_sdir\/##" >$tmp.restore_dir
diff -bcs $tmp.dump_dir $tmp.restore_dir | sed -e "s#$tmp#TMP#g"
@@ -1359,13 +1359,13 @@ _diff_compare_eas()
echo "Comparing dump directory with restore directory"
echo "Looking at the extended attributes (EAs)"
echo "EAs on dump"
- _get_eas_on_path $dump_dir | tee $RESULT_DIR/$seq.ea1 | _dir_filter
+ _get_eas_on_path $dump_dir | tee $seqres.ea1 | _dir_filter
echo "EAs on restore"
_get_eas_on_path $restore_dir/$dump_sdir \
| sed -e "s#$restore_sdir\/##" \
- | tee $RESULT_DIR/$seq.ea2 \
+ | tee $seqres.ea2 \
| _dir_filter
- diff -s $RESULT_DIR/$seq.ea1 $RESULT_DIR/$seq.ea2
+ diff -s $seqres.ea1 $seqres.ea2
}
@@ -1384,7 +1384,7 @@ _diff_compare()
#
_dump_inventory()
{
- $XFSDUMP_PROG $_dump_debug -I | tee -a $RESULT_DIR/$seq.full |
_dump_filter_main
+ $XFSDUMP_PROG $_dump_debug -I | tee -a $seqres.full | _dump_filter_main
}
#
@@ -1394,9 +1394,9 @@ _dump_inventory()
_do_invutil()
{
host=`hostname`
- echo "xfsinvutil $_invutil_debug -M $host:$SCRATCH_MNT \"$middate\" $*"
>$RESULT_DIR/$seq.full
+ echo "xfsinvutil $_invutil_debug -M $host:$SCRATCH_MNT \"$middate\" $*"
>$seqres.full
$XFSINVUTIL_PROG $_invutil_debug $* -M $host:$SCRATCH_MNT "$middate" \
- | tee -a $RESULT_DIR/$seq.full | _invutil_filter
+ | tee -a $seqres.full | _invutil_filter
}
#
@@ -1416,7 +1416,7 @@ _check_quota()
$here/src/feature -P $SCRATCH_DEV && pquota=1
$AWK_PROG -v uquota=$uquota -v gquota=$gquota -v pquota=$pquota \
- -v full=$RESULT_DIR/$seq.full -v usermsg="$usermsg" \
+ -v full=$seqres.full -v usermsg="$usermsg" \
-v groupmsg="$groupmsg" -v projectmsg="$projectmsg" '
$0 ~ projectmsg {
print "Found project quota:", $0 >>full
diff --git a/common/filestreams b/common/filestreams
index b3aee27..590fa7f 100644
--- a/common/filestreams
+++ b/common/filestreams
@@ -116,7 +116,7 @@ _check_for_dupes()
for this_num_two in $num_str_two; do
if [ "$this_num_one" == "$this_num_two" ]; then
echo "duplicate AG $this_num_one found" \
- >> $RESULT_DIR/$seq.full
+ >> $seqres.full
return 1
fi
done
@@ -189,7 +189,7 @@ _test_streams() {
stream_index=1
while [ $stream_index -le $stream_count ]; do
this_stream_ags=`_get_stream_ags stream${stream_index}-dir`
- echo "stream $stream_index AGs: $this_stream_ags" >>
$RESULT_DIR/$seq.full
+ echo "stream $stream_index AGs: $this_stream_ags" >>
$seqres.full
_check_for_dupes "$ags_seen" "$this_stream_ags"
if [ $? -ne 0 ]; then
# this stream is not in seperate AGs to previous streams
diff --git a/common/log b/common/log
index e0e2bc6..88e64bc 100644
--- a/common/log
+++ b/common/log
@@ -20,7 +20,7 @@
# Created by dxm@xxxxxxx & tes@xxxxxxx
#
-fulldir=$RESULT_DIR/$seq.fulldir
+fulldir=$seqres.fulldir
rm -rf $fulldir
_cleanup_logfiles()
@@ -33,16 +33,16 @@ _cleanup_logfiles()
_full()
{
- echo "" >>$RESULT_DIR/$seq.full
- echo "*** $* ***" >>$RESULT_DIR/$seq.full
- echo "" >>$RESULT_DIR/$seq.full
+ echo "" >>$seqres.full
+ echo "*** $* ***" >>$seqres.full
+ echo "" >>$seqres.full
}
_echofull()
{
- echo "" | tee -a $RESULT_DIR/$seq.full
- echo "*** $* ***" | tee -a $RESULT_DIR/$seq.full
- echo "" | tee -a $RESULT_DIR/$seq.full
+ echo "" | tee -a $seqres.full
+ echo "*** $* ***" | tee -a $seqres.full
+ echo "" | tee -a $seqres.full
}
# Handle the operations which get split over Log Record
@@ -212,13 +212,13 @@ _filter_logprint()
_check_log()
{
_full "clean_log : xfs_logprint"
- _scratch_xfs_logprint -t | tee -a $RESULT_DIR/$seq.full \
+ _scratch_xfs_logprint -t | tee -a $seqres.full \
| head | grep -q "<CLEAN>" || _fail "DIRTY LOG"
}
_print_logstate()
{
- _scratch_xfs_logprint -t | tee -a $RESULT_DIR/$seq.full >$tmp.logprint
+ _scratch_xfs_logprint -t | tee -a $seqres.full >$tmp.logprint
if grep -q "<DIRTY>" $tmp.logprint; then
echo "dirty log"
fi
@@ -288,7 +288,7 @@ _mkfs_log()
# mkfs options to append to log size otion can be specified ($*)
export MKFS_OPTIONS="-l size=2000b -l lazy-count=1 $*"
_full "mkfs"
- _scratch_mkfs_xfs >>$RESULT_DIR/$seq.full 2>&1
+ _scratch_mkfs_xfs >>$seqres.full 2>&1
if [ $? -ne 0 ] ; then
_echofull "Cannot mkfs for this test using option specified:
$MKFS_OPTIONS"
return 1
@@ -305,7 +305,7 @@ _create_log()
{
# mount the FS
_full "mount"
- _scratch_mount >>$RESULT_DIR/$seq.full 2>&1
+ _scratch_mount >>$seqres.full 2>&1
if [ $? -ne 0 ] ; then
_echofull "mount failed: $MOUNT_OPTIONS"
return 1
@@ -318,7 +318,7 @@ _create_log()
# unmount the FS
_full "umount"
- umount $SCRATCH_DEV >>$RESULT_DIR/$seq.full 2>&1
+ umount $SCRATCH_DEV >>$seqres.full 2>&1
if [ $? -ne 0 ] ; then
_echofull "umount failed"
return 1
@@ -334,7 +334,7 @@ _create_log_sync()
{
# mount the FS
_full " mount"
- _scratch_mount >>$RESULT_DIR/$seq.full 2>&1
+ _scratch_mount >>$seqres.full 2>&1
if [ $? -ne 0 ] ; then
_echofull "mount failed: $MOUNT_OPTIONS"
return 1
@@ -349,7 +349,7 @@ _create_log_sync()
# unmount the FS
_full "umount"
- umount $SCRATCH_DEV >>$RESULT_DIR/$seq.full 2>&1
+ umount $SCRATCH_DEV >>$seqres.full 2>&1
if [ $? -ne 0 ] ; then
_echofull "umount failed"
return 1
@@ -448,21 +448,21 @@ _require_v2log()
{
# test out mkfs to see if it supports "-l version=2"
export MKFS_OPTIONS="-l version=2"
- if ! _scratch_mkfs_xfs >>$RESULT_DIR/$seq.full 2>&1; then
+ if ! _scratch_mkfs_xfs >>$seqres.full 2>&1; then
_notrun "mkfs does not support v2 logs"
fi
# test out mount to see if it mounts a v2 log fs
export MOUNT_OPTIONS="-o logbsize=32k"
- if ! _scratch_mount >>$RESULT_DIR/$seq.full 2>&1; then
+ if ! _scratch_mount >>$seqres.full 2>&1; then
_notrun "mount/kernel does not support v2 logs"
fi
# check after unmount to see if it is clean
# i.e. it is not a 6.5.25 buggy version checking kernel
touch $SCRATCH_MNT/file
- umount $SCRATCH_DEV >>$RESULT_DIR/$seq.full 2>&1
- if _scratch_xfs_logprint -t | tee -a $RESULT_DIR/$seq.full \
+ umount $SCRATCH_DEV >>$seqres.full 2>&1
+ if _scratch_xfs_logprint -t | tee -a $seqres.full \
| head | grep -q "<DIRTY>"; then
_notrun "kernel does not support v2 logs"
fi
diff --git a/common/quota b/common/quota
index ff80382..7f349ab 100644
--- a/common/quota
+++ b/common/quota
@@ -96,8 +96,8 @@ _file_as_id()
parent=`dirname $1`
if [ $3 = p ]; then
- echo PARENT: xfs_io -r -c "chproj $2" -c "chattr +P" $parent
>>$RESULT_DIR/$seq.full
- $XFS_IO_PROG -r -c "chproj $2" -c "chattr +P" $parent
>>$RESULT_DIR/$seq.full 2>&1
+ echo PARENT: xfs_io -r -c "chproj $2" -c "chattr +P" $parent
>>$seqres.full
+ $XFS_IO_PROG -r -c "chproj $2" -c "chattr +P" $parent >>$seqres.full
2>&1
magik='$>' # (irrelevent, above set projid-inherit-on-parent)
elif [ $3 = u ]; then
magik='$>' # perlspeak for effective uid
@@ -107,7 +107,7 @@ _file_as_id()
_notrun "broken type in call to _file_as_id in test $seq"
fi
- perl <<EOF >>$RESULT_DIR/$seq.full 2>&1
+ perl <<EOF >>$seqres.full 2>&1
\$| = 1;
$magik = $2;
if ($5 == 0) {
@@ -119,11 +119,11 @@ _file_as_id()
}
EOF
# for debugging the above euid change, try... [need write in cwd]
-# exec "dd if=/dev/zero of=$1 bs=$4 count=$5 >>$RESULT_DIR/$seq.full
2>&1";
+# exec "dd if=/dev/zero of=$1 bs=$4 count=$5 >>$seqres.full 2>&1";
if [ $3 = p ]; then
- echo PARENT: xfs_io -r -c "chproj 0" -c "chattr -P" $parent
>>$RESULT_DIR/$seq.full
- $XFS_IO_PROG -r -c "chproj 0" -c "chattr -P" $parent
>>$RESULT_DIR/$seq.full 2>&1
+ echo PARENT: xfs_io -r -c "chproj 0" -c "chattr -P" $parent
>>$seqres.full
+ $XFS_IO_PROG -r -c "chproj 0" -c "chattr -P" $parent >>$seqres.full 2>&1
fi
}
@@ -198,8 +198,8 @@ _qsetup()
_notrun "No quota support at mount time"
fi
- echo "Using output from '" `ls -l $seq.out` "'" >>$RESULT_DIR/$seq.full
- echo "and using type=$type id=$id" >>$RESULT_DIR/$seq.full
+ echo "Using output from '" `ls -l $seq.out` "'" >>$seqres.full
+ echo "and using type=$type id=$id" >>$seqres.full
}
#
@@ -229,7 +229,7 @@ _qmount_option()
# Ensure we have the given quota option - duplicates are fine
export MOUNT_OPTIONS="$MOUNT_OPTIONS -o $1"
- echo "MOUNT_OPTIONS = $MOUNT_OPTIONS" >>$RESULT_DIR/$seq.full
+ echo "MOUNT_OPTIONS = $MOUNT_OPTIONS" >>$seqres.full
}
_check_quota_usage()
diff --git a/common/rc b/common/rc
index 3aa8742..ca40605 100644
--- a/common/rc
+++ b/common/rc
@@ -358,9 +358,9 @@ _scratch_mkfs_xfs()
if [ $mkfs_status -ne 0 -a ! -z "$extra_mkfs_options" ]; then
echo "** mkfs failed with extra mkfs options added to
\"$MKFS_OPTIONS\" by test $seq **" \
- >>$RESULT_DIR/$seq.full
+ >>$seqres.full
echo "** attempting to mkfs using only test $seq options:
$extra_mkfs_options **" \
- >>$RESULT_DIR/$seq.full
+ >>$seqres.full
# running mkfs again. overwrite previous mkfs output files
$MKFS_XFS_PROG $SCRATCH_OPTIONS $extra_mkfs_options $SCRATCH_DEV \
2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
@@ -796,7 +796,7 @@ _is_block_dev()
fi
}
-# Do a command, log it to $RESULT_DIR/$seq.full, optionally test return status
+# Do a command, log it to $seqres.full, optionally test return status
# and die if command fails. If called with one argument _do executes the
# command, logs it, and returns its exit status. With two arguments _do
# first prints the message passed in the first argument, and then "done"
@@ -804,7 +804,7 @@ _is_block_dev()
# second argument. If the command fails and the variable _do_die_on_error
# is set to "always" or the two argument form is used and _do_die_on_error
# is set to "message_only" _do will print an error message to
-# $RESULT_DIR/$seq.out and exit.
+# $seqres.out and exit.
_do()
{
@@ -819,9 +819,9 @@ _do()
status=1; exit
fi
- (eval "echo '---' \"$_cmd\"") >>$RESULT_DIR/$seq.full
+ (eval "echo '---' \"$_cmd\"") >>$seqres.full
(eval "$_cmd") >$tmp._out 2>&1; ret=$?
- cat $tmp._out | _fix_malloc >>$RESULT_DIR/$seq.full
+ cat $tmp._out | _fix_malloc >>$seqres.full
if [ $# -eq 2 ]; then
if [ $ret -eq 0 ]; then
echo "done"
@@ -834,7 +834,7 @@ _do()
-o \( $# -eq 2 -a "$_do_die_on_error" = "message_only" \) ]
then
[ $# -ne 2 ] && echo
- eval "echo \"$_cmd\" failed \(returned $ret\): see
$RESULT_DIR/$seq.full"
+ eval "echo \"$_cmd\" failed \(returned $ret\): see $seqres.full"
status=1; exit
fi
@@ -845,7 +845,7 @@ _do()
#
_notrun()
{
- echo "$*" > $RESULT_DIR/$seq.notrun
+ echo "$*" > $seqres.notrun
echo "$seq not run: $*"
status=0
exit
@@ -855,8 +855,8 @@ _notrun()
#
_fail()
{
- echo "$*" | tee -a $RESULT_DIR/$seq.full
- echo "(see $RESULT_DIR/$seq.full for details)"
+ echo "$*" | tee -a $seqres.full
+ echo "(see $seqres.full for details)"
status=1
exit 1
}
@@ -1343,12 +1343,12 @@ _check_generic_filesystem()
fsck -t $FSTYP $FSCK_OPTIONS $device >$tmp.fsck 2>&1
if [ $? -ne 0 ]
then
- echo "_check_generic_filesystem: filesystem on $device is inconsistent
(see $RESULT_DIR/$seq.full)"
+ echo "_check_generic_filesystem: filesystem on $device is inconsistent
(see $seqres.full)"
- echo "_check_generic filesystem: filesystem on $device is
inconsistent" >>$RESULT_DIR/$seq.full
- echo "*** fsck.$FSTYP output ***" >>$RESULT_DIR/$seq.full
- cat $tmp.fsck >>$RESULT_DIR/$seq.full
- echo "*** end fsck.$FSTYP output" >>$RESULT_DIR/$seq.full
+ echo "_check_generic filesystem: filesystem on $device is
inconsistent" >>$seqres.full
+ echo "*** fsck.$FSTYP output ***" >>$seqres.full
+ cat $tmp.fsck >>$seqres.full
+ echo "*** end fsck.$FSTYP output" >>$seqres.full
ok=0
fi
@@ -1356,9 +1356,9 @@ _check_generic_filesystem()
if [ $ok -eq 0 ]
then
- echo "*** mount output ***" >>$RESULT_DIR/$seq.full
- _mount >>$RESULT_DIR/$seq.full
- echo "*** end mount output" >>$RESULT_DIR/$seq.full
+ echo "*** mount output ***" >>$seqres.full
+ _mount >>$seqres.full
+ echo "*** end mount output" >>$seqres.full
elif [ "$type" = "$FSTYP" ]
then
# was mounted ...
@@ -1412,12 +1412,12 @@ _check_xfs_filesystem()
| tee $tmp.logprint | grep -q "<CLEAN>"
if [ $? -ne 0 -a "$HOSTOS" = "Linux" ]
then
- echo "_check_xfs_filesystem: filesystem on $device has dirty log (see
$RESULT_DIR/$seq.full)"
+ echo "_check_xfs_filesystem: filesystem on $device has dirty log (see
$seqres.full)"
- echo "_check_xfs_filesystem: filesystem on $device has dirty log"
>>$RESULT_DIR/$seq.full
- echo "*** xfs_logprint -t output ***" >>$RESULT_DIR/$seq.full
- cat $tmp.logprint >>$RESULT_DIR/$seq.full
- echo "*** end xfs_logprint output" >>$RESULT_DIR/$seq.full
+ echo "_check_xfs_filesystem: filesystem on $device has dirty log"
>>$seqres.full
+ echo "*** xfs_logprint -t output ***" >>$seqres.full
+ cat $tmp.logprint >>$seqres.full
+ echo "*** end xfs_logprint output" >>$seqres.full
ok=0
fi
@@ -1431,12 +1431,12 @@ _check_xfs_filesystem()
fi
if [ -s $tmp.fs_check ]
then
- echo "_check_xfs_filesystem: filesystem on $device is inconsistent (c)
(see $RESULT_DIR/$seq.full)"
+ echo "_check_xfs_filesystem: filesystem on $device is inconsistent (c)
(see $seqres.full)"
- echo "_check_xfs_filesystem: filesystem on $device is inconsistent"
>>$RESULT_DIR/$seq.full
- echo "*** xfs_check output ***" >>$RESULT_DIR/$seq.full
- cat $tmp.fs_check >>$RESULT_DIR/$seq.full
- echo "*** end xfs_check output" >>$RESULT_DIR/$seq.full
+ echo "_check_xfs_filesystem: filesystem on $device is inconsistent"
>>$seqres.full
+ echo "*** xfs_check output ***" >>$seqres.full
+ cat $tmp.fs_check >>$seqres.full
+ echo "*** end xfs_check output" >>$seqres.full
ok=0
fi
@@ -1444,12 +1444,12 @@ _check_xfs_filesystem()
$XFS_REPAIR_PROG -n $extra_log_options $extra_rt_options $device
>$tmp.repair 2>&1
if [ $? -ne 0 ]
then
- echo "_check_xfs_filesystem: filesystem on $device is inconsistent (r)
(see $RESULT_DIR/$seq.full)"
+ echo "_check_xfs_filesystem: filesystem on $device is inconsistent (r)
(see $seqres.full)"
- echo "_check_xfs_filesystem: filesystem on $device is inconsistent"
>>$RESULT_DIR/$seq.full
- echo "*** xfs_repair -n output ***" >>$RESULT_DIR/$seq.full
- cat $tmp.repair | _fix_malloc >>$RESULT_DIR/$seq.full
- echo "*** end xfs_repair output" >>$RESULT_DIR/$seq.full
+ echo "_check_xfs_filesystem: filesystem on $device is inconsistent"
>>$seqres.full
+ echo "*** xfs_repair -n output ***" >>$seqres.full
+ cat $tmp.repair | _fix_malloc >>$seqres.full
+ echo "*** end xfs_repair output" >>$seqres.full
ok=0
fi
@@ -1457,9 +1457,9 @@ _check_xfs_filesystem()
if [ $ok -eq 0 ]
then
- echo "*** mount output ***" >>$RESULT_DIR/$seq.full
- _mount >>$RESULT_DIR/$seq.full
- echo "*** end mount output" >>$RESULT_DIR/$seq.full
+ echo "*** mount output ***" >>$seqres.full
+ _mount >>$seqres.full
+ echo "*** end mount output" >>$seqres.full
elif [ "$type" = "xfs" ]
then
_mount_or_remount_rw "$extra_mount_options" $device $mountpoint
@@ -1507,12 +1507,12 @@ _check_udf_filesystem()
OPT_ARG="-lastvalidblock $LAST_BLOCK"
fi
- rm -f $RESULT_DIR/$seq.checkfs
+ rm -f $seqres.checkfs
sleep 1 # Due to a problem with time stamps in udf_test
- $here/src/udf_test $OPT_ARG $device | tee $RESULT_DIR/$seq.checkfs | egrep
"Error|Warning" | \
+ $here/src/udf_test $OPT_ARG $device | tee $seqres.checkfs | egrep
"Error|Warning" | \
_udf_test_known_error_filter | \
egrep -iv "Error count:.*[0-9]+.*total occurrences:.*[0-9]+|Warning
count:.*[0-9]+.*total occurrences:.*[0-9]+" | \
- sed "s/^.*$/Warning UDF Verifier reported errors see
$RESULT_DIR/$seq.checkfs./g"
+ sed "s/^.*$/Warning UDF Verifier reported errors see $seqres.checkfs./g"
}
@@ -1553,12 +1553,12 @@ _check_btrfs_filesystem()
btrfsck $device >$tmp.fsck 2>&1
if [ $? -ne 0 ]
then
- echo "_check_btrfs_filesystem: filesystem on $device is inconsistent
(see $RESULT_DIR/$seq.full)"
+ echo "_check_btrfs_filesystem: filesystem on $device is inconsistent
(see $seqres.full)"
- echo "_check_btrfs_filesystem: filesystem on $device is inconsistent"
>>$RESULT_DIR/$seq.full
- echo "*** fsck.$FSTYP output ***" >>$RESULT_DIR/$seq.full
- cat $tmp.fsck >>$RESULT_DIR/$seq.full
- echo "*** end fsck.$FSTYP output" >>$RESULT_DIR/$seq.full
+ echo "_check_btrfs_filesystem: filesystem on $device is inconsistent"
>>$seqres.full
+ echo "*** fsck.$FSTYP output ***" >>$seqres.full
+ cat $tmp.fsck >>$seqres.full
+ echo "*** end fsck.$FSTYP output" >>$seqres.full
ok=0
fi
@@ -1566,9 +1566,9 @@ _check_btrfs_filesystem()
if [ $ok -eq 0 ]
then
- echo "*** mount output ***" >>$RESULT_DIR/$seq.full
- _mount >>$RESULT_DIR/$seq.full
- echo "*** end mount output" >>$RESULT_DIR/$seq.full
+ echo "*** mount output ***" >>$seqres.full
+ _mount >>$seqres.full
+ echo "*** end mount output" >>$seqres.full
elif [ "$type" = "$FSTYP" ]
then
# was mounted ...
@@ -2053,8 +2053,8 @@ _scale_fsstress_args()
run_check()
{
- echo "# $@" >> $RESULT_DIR/$seq.full 2>&1
- "$@" >> $RESULT_DIR/$seq.full 2>&1 || _fail "failed: '$@'"
+ echo "# $@" >> $seqres.full 2>&1
+ "$@" >> $seqres.full 2>&1 || _fail "failed: '$@'"
}
################################################################################
diff --git a/common/scsi_debug b/common/scsi_debug
index f05c8db..d073b6d 100644
--- a/common/scsi_debug
+++ b/common/scsi_debug
@@ -47,7 +47,7 @@ _get_scsi_debug_dev()
let phys_exp=phys_exp+1
done
opts="sector_size=$logical physblk_exp=$phys_exp
lowest_aligned=$unaligned dev_size_mb=$size"
- echo "scsi_debug options $opts" >> $RESULT_DIR/$seq.full
+ echo "scsi_debug options $opts" >> $seqres.full
modprobe scsi_debug $opts
[ $? -eq 0 ] || _fail "scsi_debug modprobe failed"
sleep 1
diff --git a/tests/generic/001 b/tests/generic/001
index 35c88f2..aa82441 100755
--- a/tests/generic/001
+++ b/tests/generic/001
@@ -190,7 +190,7 @@ _mark_iteration()
#
_chain()
{
- $AWK_PROG -v full_file=$here/$seqres.full -v verify=$verify <$tmp.config '
+ $AWK_PROG -v full_file=$seqres.full -v verify=$verify <$tmp.config '
BEGIN { nfile = 0 }
/^\#/ { next }
{ file[nfile] = $1
@@ -238,7 +238,7 @@ END { srand('$iter')
}
}
}' \
- | tee -a $here/$seqres.full | sh
+ | tee -a $seqres.full | sh
}
_check()
@@ -292,7 +292,7 @@ _cleanup()
fi
}
-rm -f $here/$seqres.full
+rm -f $seqres.full
status=0
_cleanup
status=1
@@ -306,7 +306,7 @@ _setup
for iter in 1 2 3 4 5
do
echo -n "iter $iter chain ... "
- echo "iter $iter" >> $here/$seqres.full
+ echo "iter $iter" >> $seqres.full
_chain
_check
if [ -f $tmp.bad ]
diff --git a/tests/generic/010 b/tests/generic/010
index d338db6..0bdfdd5 100755
--- a/tests/generic/010
+++ b/tests/generic/010
@@ -64,7 +64,7 @@ rm -f $seqres.full
cd $testdir
-$here/src/dbtest -l 5 -n 1000 2>&1 | tee -a $here/$seqres.full | _filter_dbtest
+$here/src/dbtest -l 5 -n 1000 2>&1 | tee -a $seqres.full | _filter_dbtest
# success, all done
exit
diff --git a/tests/generic/013 b/tests/generic/013
index a9c07c4..b364f1b 100755
--- a/tests/generic/013
+++ b/tests/generic/013
@@ -78,11 +78,11 @@ _do_test()
if ! $FSSTRESS_PROG $_param $FSSTRESS_AVOID -v -m 8 -n $_count -d $out
>>$dbgoutfile 2>&1
then
echo " fsstress (count=$_count) returned $? - see $seqres.full"
- echo "--------------------------------------"
>>$here/$seqres.full
- echo "$_n - output from fsstress:"
>>$here/$seqres.full
- echo "--------------------------------------"
>>$here/$seqres.full
- echo "<NOT LOGGED>"
>>$here/$seqres.full
- #cat $tmp.out
>>$here/$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "$_n - output from fsstress:" >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "<NOT LOGGED>" >>$seqres.full
+ #cat $tmp.out >>$seqres.full
status=1
fi
@@ -96,7 +96,7 @@ _supported_os IRIX Linux
_setup_testdir
-rm -f $here/$seqres.full
+rm -f $seqres.full
echo "brevity is wit..."
count=1000
diff --git a/tests/generic/074 b/tests/generic/074
index 6df8c57..b9e1595 100755
--- a/tests/generic/074
+++ b/tests/generic/074
@@ -108,7 +108,7 @@ _process_args()
# real QA test starts here
-rm -f $here/$seqres.full
+rm -f $seqres.full
_supported_fs generic
_supported_os IRIX Linux
diff --git a/tests/generic/075 b/tests/generic/075
index 52e6a43..4477db4 100755
--- a/tests/generic/075
+++ b/tests/generic/075
@@ -78,10 +78,10 @@ _do_test()
cd $out
if ! $here/ltp/fsx $_param -P $here $seq.$_n &>/dev/null
then
- echo " fsx ($_param) failed, $? - compare $seq.$_n.{good,bad,fsxlog}"
- mv $out/$seq.$_n $here/$seq.$_n.full
- od -xAx $here/$seq.$_n.full > $here/$seq.$_n.bad
- od -xAx $here/$seq.$_n.fsxgood > $here/$seq.$_n.good
+ echo " fsx ($_param) failed, $? - compare
$seqres.$_n.{good,bad,fsxlog}"
+ mv $out/$seq.$_n $seqres.$_n.full
+ od -xAx $seqres.$_n.full > $seqres.$_n.bad
+ od -xAx $seqres.$_n.fsxgood > $seqres.$_n.good
status=1
exit
fi
@@ -139,7 +139,7 @@ echo "Params: n = $numops1 N = $numops2 l = $filelen"
>>$seqres.full
_setup_testdir
-rm -f $here/$seqres.full
+rm -f $seqres.full
echo "brevity is wit..."
_check_test_fs
diff --git a/tests/generic/089 b/tests/generic/089
index c4c76e2..fdddad4 100755
--- a/tests/generic/089
+++ b/tests/generic/089
@@ -73,8 +73,8 @@ mtab()
echo directory entries:
ls | grep mtab
- echo directory entries >> $here/$seqres.full
- ls -li >> $here/$seqres.full
+ echo directory entries >> $seqres.full
+ ls -li >> $seqres.full
}
# directory with only a few entries
diff --git a/tests/generic/100 b/tests/generic/100
index 123dc5f..f4b0c8f 100755
--- a/tests/generic/100
+++ b/tests/generic/100
@@ -62,10 +62,10 @@ rm -rf $POPULATED_DIR
rm -f $TEMP_DIR/$TAR_FILE
# Create the new directory structure
-_populate_fs -n $NDIRS -f $NFILES -d $DEPTH -r $POPULATED_DIR -s $SIZE
>>$here/$seqres.full 2>&1
+_populate_fs -n $NDIRS -f $NFILES -d $DEPTH -r $POPULATED_DIR -s $SIZE
>>$seqres.full 2>&1
# Then tar up the directory structure
-tar -cvf $TEMP_DIR/$TAR_FILE $POPULATED_DIR >>$here/$seqres.full 2>&1
+tar -cvf $TEMP_DIR/$TAR_FILE $POPULATED_DIR >>$seqres.full 2>&1
# create f/s
_require_scratch
@@ -73,12 +73,12 @@ _setup_testdir
# untar on f/s
cd $testdir
-tar -xRvf $TEMP_DIR/$TAR_FILE >>$here/$seqres.full 2>&1
+tar -xRvf $TEMP_DIR/$TAR_FILE >>$seqres.full 2>&1
cd $here
# use diff -qr to compare
-ls -R -l ${testdir}${POPULATED_DIR} >>$here/$seqres.full 2>&1
+ls -R -l ${testdir}${POPULATED_DIR} >>$seqres.full 2>&1
diff -qr $POPULATED_DIR ${testdir}${POPULATED_DIR}
cd /
diff --git a/tests/generic/112 b/tests/generic/112
index 5f5b19d..0cd19db 100755
--- a/tests/generic/112
+++ b/tests/generic/112
@@ -79,7 +79,7 @@ _do_test()
if ! $here/ltp/fsx $_param -P $here $seq.$_n &>/dev/null
then
echo " fsx ($_param) returned $? - see $seq.$_n.full"
- mv $seq.$_n.fsxlog $here/$seq.$_n.full
+ mv $seq.$_n.fsxlog $seqres.$_n.full
status=1
exit
fi
@@ -140,7 +140,7 @@ echo "Params: n = $numops1 N = $numops2 l = $filelen"
>>$seqres.full
_setup_testdir
-rm -f $here/$seqres.full
+rm -f $seqres.full
echo "brevity is wit..."
_check_test_fs
diff --git a/tests/generic/192 b/tests/generic/192
index 66d8a66..13784f7 100755
--- a/tests/generic/192
+++ b/tests/generic/192
@@ -67,7 +67,7 @@ time2=`_access_time $testfile | tee -a $seqres.full`
cd /
umount $TEST_DIR
_test_mount
-time3=`_access_time $testfile | tee -a $here/$seqres.full`
+time3=`_access_time $testfile | tee -a $seqres.full`
delta1=`expr $time2 - $time1`
delta2=`expr $time3 - $time1`
diff --git a/tests/generic/232 b/tests/generic/232
index ee0e16e..2402c45 100755
--- a/tests/generic/232
+++ b/tests/generic/232
@@ -39,7 +39,7 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_filter_num()
{
- tee -a $here/$seqres.full |\
+ tee -a $seqres.full |\
sed -e 's/[0-9][0-9]* inodes/I inodes/g' \
-e 's/[0-9][0-9]* paths/P paths/g' \
-e 's/seed = [0-9][0-9]*/seed = S/'
@@ -55,11 +55,11 @@ _fsstress()
count=2000
args=`_scale_fsstress_args -d $out -n $count -p 7`
- echo "fsstress $args" >> tee -a $here/$seqres.full
- if ! $FSSTRESS_PROG $args | tee -a $here/$seqres.full | _filter_num
+ echo "fsstress $args" >> tee -a $seqres.full
+ if ! $FSSTRESS_PROG $args | tee -a $seqres.full | _filter_num
then
echo " fsstress $args returned $?"
- cat $tmp.out | tee -a $here/$seqres.full
+ cat $tmp.out | tee -a $seqres.full
status=1
fi
}
diff --git a/tests/generic/233 b/tests/generic/233
index 1eb68c5..2b6cd2f 100755
--- a/tests/generic/233
+++ b/tests/generic/233
@@ -43,7 +43,7 @@ FSX_ARGS="-q -l $FSX_FILE_SIZE -o 65536 -S 191110531 -N
100000"
_filter_num()
{
- tee -a $here/$seqres.full |\
+ tee -a $seqres.full |\
sed -e 's/[0-9][0-9]* inodes/I inodes/g' \
-e 's/[0-9][0-9]* paths/P paths/g' \
-e 's/seed = [0-9][0-9]*/seed = S/'
@@ -62,11 +62,11 @@ _fsstress()
-f rename=10 -f fsync=2 -f write=15 -f dwrite=15 \
-n $count -d $out -p 7`
- echo "fsstress $args" >> tee -a $here/$seqres.full
- if ! su $qa_user -c "$FSSTRESS_PROG $args" | tee -a $here/$seqres.full
| _filter_num
+ echo "fsstress $args" >> tee -a $seqres.full
+ if ! su $qa_user -c "$FSSTRESS_PROG $args" | tee -a $seqres.full |
_filter_num
then
echo " fsstress $args returned $?"
- cat $tmp.out | tee -a $here/$seqres.full
+ cat $tmp.out | tee -a $seqres.full
status=1
fi
}
diff --git a/tests/generic/269 b/tests/generic/269
index 6e33368..684cf42 100755
--- a/tests/generic/269
+++ b/tests/generic/269
@@ -45,7 +45,7 @@ _workout()
enospc_time=2
out=$SCRATCH_MNT/fsstress.$$
args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1
$FSSTRESS_AVOID -d $out`
- echo "fsstress $args" >> $here/$seqres.full
+ echo "fsstress $args" >> $seqres.full
$FSSTRESS_PROG $args > /dev/null 2>&1 &
pid=$!
echo "Run dd writers in parallel"
@@ -53,7 +53,7 @@ _workout()
do
# File will be opened with O_TRUNC each time
dd if=/dev/zero of=$SCRATCH_MNT/SPACE_CONSUMER bs=1M \
- >> $here/$seqres.full 2>&1
+ >> $seqres.full 2>&1
sleep $enospc_time
done
kill $pid
diff --git a/tests/generic/270 b/tests/generic/270
index 294bb62..b5ed7af 100755
--- a/tests/generic/270
+++ b/tests/generic/270
@@ -48,7 +48,7 @@ _workout()
enospc_time=2
out=$SCRATCH_MNT/fsstress.$$
args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1
$FSSTRESS_AVOID -d $out`
- echo "fsstress $args" >> $here/$seqres.full
+ echo "fsstress $args" >> $seqres.full
# Grant chown capability
cp $FSSTRESS_PROG $tmp.fsstress.bin
if [ "`whereis setcap`" == "setcap:" ]; then
@@ -65,7 +65,7 @@ _workout()
# File will be opened with O_TRUNC each time
su $qa_user -c "dd if=/dev/zero \
of=$SCRATCH_MNT/SPACE_CONSUMER bs=1M " \
- >> $here/$seqres.full 2>&1
+ >> $seqres.full 2>&1
sleep $enospc_time
done
diff --git a/tests/shared/305 b/tests/shared/305
index bcb235f..91cbf03 100644
--- a/tests/shared/305
+++ b/tests/shared/305
@@ -62,7 +62,7 @@ disallow_fail_make_request()
start_fail_scratch_dev()
{
echo "Force SCRATCH_DEV device failure"
- echo " echo 1 > /sys/block/$SCRATCH_BDEV/make-it-fail" >>
$here/$seqres.full
+ echo " echo 1 > /sys/block/$SCRATCH_BDEV/make-it-fail" >> $seqres.full
echo 1 > /sys/block/$SCRATCH_BDEV/make-it-fail
}
@@ -70,7 +70,7 @@ start_fail_scratch_dev()
stop_fail_scratch_dev()
{
echo "Make SCRATCH_DEV device operable again"
- echo " echo 0 > /sys/block/$SCRATCH_BDEV/make-it-fail" >>
$here/$seqres.full
+ echo " echo 0 > /sys/block/$SCRATCH_BDEV/make-it-fail" >> $seqres.full
echo 0 > /sys/block/$SCRATCH_BDEV/make-it-fail
}
@@ -139,12 +139,12 @@ _workout()
echo ""
echo "Start fsstress.."
echo ""
- echo "fsstress $args" >> $here/$seqres.full
+ echo "fsstress $args" >> $seqres.full
$FSSTRESS_PROG $args > /dev/null 2>&1 &
fs_pid=$!
echo "Start fio.."
cat $tmp-$seq.fio >> $seqres.full
- $FIO_PROG $tmp-$seq.fio >> $here/$seqres.full 2>&1 &
+ $FIO_PROG $tmp-$seq.fio >> $seqres.full 2>&1 &
fio_pid=$!
# Let's it work for awhile, and force device failure
@@ -154,7 +154,7 @@ _workout()
# that so buffered write(2) may succeed, but any integrity operations
# such as (sync, fsync, fdatasync, direct-io) should fail.
dd if=/dev/zero of=$SCRATCH_MNT/touch_failed_filesystem count=1 bs=4k
conv=fsync \
- >> $here/$seqres.full 2>&1 && \
+ >> $seqres.full 2>&1 && \
_fail "failed: still able to perform integrity fsync on
$SCRATCH_MNT"
kill $fs_pid
@@ -176,7 +176,7 @@ _workout()
# real QA test starts here
-_scratch_mkfs >> $here/$seqres.full 2>&1 || _fail "mkfs failed"
+_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
_scratch_mount || _fail "mount failed"
allow_fail_make_request
_workout
diff --git a/tests/xfs/008 b/tests/xfs/008
index 4bf6c00..e7a1768 100755
--- a/tests/xfs/008
+++ b/tests/xfs/008
@@ -73,14 +73,14 @@ _do_test()
fi
else
echo " randholes returned $? - see $seq.out.full"
- echo "--------------------------------------"
>>$here/$seq.out.full
- echo "$_n - output from randholes:"
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- cat $tmp.out
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- echo "$_n - output from bmap:"
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- xfs_bmap -vvv $out
>>$here/$seq.out.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "$_n - output from randholes:" >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ cat $tmp.out >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "$_n - output from bmap:" >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ xfs_bmap -vvv $out >>$seqres.full
status=1
fi
}
@@ -91,7 +91,7 @@ _supported_os IRIX Linux
_setup_testdir
-rm -f $here/$seq.out.full
+rm -f $seqres.full
# Note on special numbers here.
#
diff --git a/tests/xfs/012 b/tests/xfs/012
index 87c0b85..cd9c485 100755
--- a/tests/xfs/012
+++ b/tests/xfs/012
@@ -62,7 +62,7 @@ _do_test()
echo "-----------------------------------------------"
if ! $here/src/holes $_param $out >$tmp.out
then
- echo " holes returned $? - see $seq.out.full"
+ echo " holes returned $? - see $seqres.full"
failed=1
status=1
fi
@@ -78,7 +78,7 @@ _do_test()
if [ $count -ne $_count ]
then
- echo " unexpected number of holes - see $seq.out.full"
+ echo " unexpected number of holes - see $seqres.full"
status=1
failed=1
fi
@@ -86,18 +86,18 @@ _do_test()
if [ $failed -eq 1 ]
then
- echo "--------------------------------------"
>>$here/$seq.out.full
- echo "$_n - output from holes:"
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- cat $tmp.out
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- echo "$_n - output from bmap:"
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- xfs_bmap -vvv $out
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- echo "$_n - output from ls -li:"
>>$here/$seq.out.full
- echo "--------------------------------------"
>>$here/$seq.out.full
- ls -li $out
>>$here/$seq.out.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "$_n - output from holes:" >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ cat $tmp.out >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "$_n - output from bmap:" >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ xfs_bmap -vvv $out >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ echo "$_n - output from ls -li:" >>$seqres.full
+ echo "--------------------------------------" >>$seqres.full
+ ls -li $out >>$seqres.full
status=1
fi
}
@@ -108,7 +108,7 @@ _supported_os IRIX Linux
_setup_testdir
-rm -f $here/$seq.out.full
+rm -f $seqres.full
# small & fairly dense
_do_test 1 "-l 40960000 -b 40960 -i 10 -c 1" 100
diff --git a/tests/xfs/024 b/tests/xfs/024
index 68e9788..2e13288 100755
--- a/tests/xfs/024
+++ b/tests/xfs/024
@@ -43,11 +43,11 @@ _require_tape $TAPE_DEV
_create_dumpdir_fill
# ensure file/dir timestamps precede dump timestamp
sleep 2
-src/bstat $SCRATCH_MNT >>$here/$seqres.full
+src/bstat $SCRATCH_MNT >>$seqres.full
_erase_hard
_do_dump
_append_dumpdir_fill
-src/bstat $SCRATCH_MNT >>$here/$seqres.full
+src/bstat $SCRATCH_MNT >>$seqres.full
_erase_hard
_do_dump -l 1
_do_restore
diff --git a/tests/xfs/067 b/tests/xfs/067
index fbfaa1f..27f5713 100755
--- a/tests/xfs/067
+++ b/tests/xfs/067
@@ -50,11 +50,11 @@ isize=0
_scratch_mkfs_xfs | _filter_mkfs >$seqres.full 2>$tmp.mkfs
[ $? -eq 0 ] && source $tmp.mkfs
if [ "$isize" -lt 1024 ]; then
- _scratch_mkfs_xfs -i size=1024 >>$here/$seqres.full \
+ _scratch_mkfs_xfs -i size=1024 >>$seqres.full \
|| _notrun "Cannot mkfs for this test using MKFS_OPTIONS specified"
fi
-_scratch_mount >>$here/$seqres.full || _fail "mount failed"
-xfs_info $SCRATCH_MNT >>$here/$seqres.full
+_scratch_mount >>$seqres.full || _fail "mount failed"
+xfs_info $SCRATCH_MNT >>$seqres.full
cd $SCRATCH_MNT
echo ""
diff --git a/tests/xfs/114 b/tests/xfs/114
index 4dfdf86..1029dbc 100755
--- a/tests/xfs/114
+++ b/tests/xfs/114
@@ -80,8 +80,8 @@ _test_create()
p=dir2/dir3/dir4/file4
touch $p
- #_print_names $p >>$here/$seqres.full
- _print_names $p | tee -a $here/$seqres.full
+ #_print_names $p >>$seqres.full
+ _print_names $p | tee -a $seqres.full
_check_paths $SCRATCH_MNT/$p
}
@@ -131,13 +131,13 @@ _test_hardlink()
ln $p $x
done
- _print_names $p >>$here/$seqres.full
+ _print_names $p >>$seqres.full
echo ""
echo "print out names and check after created hardlinks"
echo ""
for x in $paths; do
- _print_names $x | tee -a $here/$seqres.full
+ _print_names $x | tee -a $seqres.full
_check_paths $SCRATCH_MNT/$x
done
@@ -161,7 +161,7 @@ _test_hardlink()
echo ""
for x in $paths; do
if [ -e $x ]; then
- _print_names $x | tee -a $here/$seqres.full
+ _print_names $x | tee -a $seqres.full
_check_paths $SCRATCH_MNT/$x
fi
done
@@ -230,7 +230,7 @@ _test_rename()
_filter_num()
{
- tee -a $here/$seqres.full |\
+ tee -a $seqres.full |\
sed -e 's/[0-9][0-9]* inodes/I inodes/g' \
-e 's/[0-9][0-9]* paths/P paths/g' \
-e 's/seed = [0-9][0-9]*/seed = S/'
@@ -255,7 +255,7 @@ _test_fsstress()
if ! $FSSTRESS_PROG $args | _filter_num
then
echo " fsstress $args returned $?"
- cat $tmp.out | tee -a $here/$seqres.full
+ cat $tmp.out | tee -a $seqres.full
status=1
fi
@@ -284,8 +284,8 @@ _test_dirstress()
if ! $here/src/dirstress $args >$tmp.out 2>&1 | _filter_num
then
echo " dirstress failed"
- echo "*** dirstress $args" | tee -a $here/$seqres.full
- cat $tmp.out >>$here/$seqres.full
+ echo "*** dirstress $args" | tee -a $seqres.full
+ cat $tmp.out >>$seqres.full
status=1
exit
fi
@@ -295,8 +295,8 @@ _test_dirstress()
if ! $here/src/dirstress $args >$tmp.out 2>&1 | _filter_num
then
echo " dirstress failed"
- echo "*** dirstress $args" | tee -a $here/$seqres.full
- cat $tmp.out >>$here/$seqres.full
+ echo "*** dirstress $args" | tee -a $seqres.full
+ cat $tmp.out >>$seqres.full
status=1
exit
fi
@@ -316,16 +316,16 @@ _require_scratch
_require_attrs
_need_to_be_root
-rm -f $here/$seqres.full
+rm -f $seqres.full
echo "mkfs"
-_scratch_mkfs_xfs >>$here/$seqres.full 2>&1 \
+_scratch_mkfs_xfs >>$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
-_scratch_mkfs_xfs -i parent=1 >>$here/$seqres.full 2>&1 \
+_scratch_mkfs_xfs -i parent=1 >>$seqres.full 2>&1 \
|| _notrun "parent inodes not supported"
echo "mount"
-_scratch_mount >>$here/$seqres.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# real QA test starts here
diff --git a/tests/xfs/115 b/tests/xfs/115
index 0933c54..967a904 100755
--- a/tests/xfs/115
+++ b/tests/xfs/115
@@ -102,16 +102,16 @@ _supported_os IRIX
_require_scratch
_require_attrs
-rm -f $here/$seqres.full
+rm -f $seqres.full
echo "mkfs"
-_scratch_mkfs_xfs >>$here/$seqres.full 2>&1 \
+_scratch_mkfs_xfs >>$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
-_scratch_mkfs_xfs -i paths=1 >>$here/$seqres.full 2>&1 \
+_scratch_mkfs_xfs -i paths=1 >>$seqres.full 2>&1 \
|| _notrun "i_paths not supported"
echo "mount"
-_scratch_mount >>$here/$seqres.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# real QA test starts here
diff --git a/tests/xfs/168 b/tests/xfs/168
index 4ca2869..901125a 100755
--- a/tests/xfs/168
+++ b/tests/xfs/168
@@ -107,7 +107,7 @@ wait
# dmapi destroy events are asyncronous, don't rely on fixed ordering of events
# in print_event output, use sort.
echo "# here comes the dmapi print_event filtered and sorted output"
-cat $tmp.print_event_out | tee -a $here/$seqres.full |
_filter_dmapi_print_event | LC_COLLATE=POSIX sort
+cat $tmp.print_event_out | tee -a $seqres.full | _filter_dmapi_print_event |
LC_COLLATE=POSIX sort
rm $tmp.print_event_out
status=0
diff --git a/tests/xfs/186 b/tests/xfs/186
index 44edaf7..8df91b6 100755
--- a/tests/xfs/186
+++ b/tests/xfs/186
@@ -78,7 +78,7 @@ _rmv_eas()
_filter_inode()
{
- tee -a $here/$seqres.full | \
+ tee -a $seqres.full | \
sed -e "s/core.forkoff/forkoff/g" | \
egrep '^u.sfdir2|^a.sfattr|forkoff' | \
egrep -v 'inumber|parent'
@@ -86,7 +86,7 @@ _filter_inode()
_filter_version()
{
- tee -a $here/$seqres.full | tr ',' '\n' | grep ATTR
+ tee -a $seqres.full | tr ',' '\n' | grep ATTR
}
_print_inode()
diff --git a/tests/xfs/282 b/tests/xfs/282
index 8ddb258..15ccc3f 100755
--- a/tests/xfs/282
+++ b/tests/xfs/282
@@ -46,13 +46,13 @@ _require_legacy_v2_format
_create_dumpdir_fill
# ensure file/dir timestamps precede dump timestamp
sleep 2
-src/bstat $SCRATCH_MNT >>$here/$seqres.full
+src/bstat $SCRATCH_MNT >>$seqres.full
echo "*** Level 0 dump, format 2"
_do_dump_file -f $tmp.l0 -K
_append_dumpdir_fill
-src/bstat $SCRATCH_MNT >>$here/$seqres.full
+src/bstat $SCRATCH_MNT >>$seqres.full
echo "*** Level 1 dump, current format"
_do_dump_file -l 1 -f $tmp.l1
diff --git a/tests/xfs/283 b/tests/xfs/283
index cd9609e..def2107 100755
--- a/tests/xfs/283
+++ b/tests/xfs/283
@@ -46,13 +46,13 @@ _require_legacy_v2_format
_create_dumpdir_fill
# ensure file/dir timestamps precede dump timestamp
sleep 2
-src/bstat $SCRATCH_MNT >>$here/$seqres.full
+src/bstat $SCRATCH_MNT >>$seqres.full
echo "*** Level 0 dump, current format"
_do_dump_file -f $tmp.l0
_append_dumpdir_fill
-src/bstat $SCRATCH_MNT >>$here/$seqres.full
+src/bstat $SCRATCH_MNT >>$seqres.full
echo "*** Level 1 dump, format 2"
_do_dump_file -l 1 -f $tmp.l1 -K
--
1.7.10.4
|