xfs
[Top] [All Lists]

Re: xfsdump INTERRUPT issue

To: <stan@xxxxxxxxxxxxxxxxx>, Dave Chinner <david@xxxxxxxxxxxxx>
Subject: Re: xfsdump INTERRUPT issue
From: "J. Ellis" <jellis@xxxxxxxx>
Date: Tue, 18 Dec 2012 15:44:29 -0500
Cc: "xfs@xxxxxxxxxxx" <xfs@xxxxxxxxxxx>
In-reply-to: <50BAB19F.1010808@xxxxxxxxxxxxxxxxx>
Thread-index: Ac3dYHmUrNoOf3TW4UW1VysOxGUWIQ==
Thread-topic: xfsdump INTERRUPT issue
User-agent: Microsoft-Entourage/12.35.0.121009
Since it's been a few days since my last post, I'm going to basically start
from scratch.

I'm running the following commands under Ubuntu 12.10:

mkdir /mnt/fp
mkdir /mnt/hr20
mount -t xfs -o rtdev=/dev/sda3 /dev/sda2 /mnt/fp
mount -t xfs -o rdev=/dev/sdb3 /dev/sdb2 /mnt/hr20
xfsdump -J - /mnt/hr20 | xfsrestore -J - /mnt/fp

When run, I get this as my output:

xfsdump: WARNING: write to stdio failed: 32 (Broken pipe)
xfsdump: ending media file
xfsdump: media file size 18874368 bytes
xfsdump: dump size (non-dir files) : 13698056 bytes
xfsdump: NOTE: dump interrupted: 16 seconds elapsed
xfsdump: Dump Status: INTERRUPT

This happens each time. In te forum where this copy procedure was
suggested, they've been reporting that the latest xfsprogs is creating these
errors, which didn't happen under at least somewhat earlier versions.

I tried dumping to a file and then restoring from the file to the fp volume
by using these commands:

mount -t xfs -o rtdev=/dev/sda3 /dev/sda2 /mnt/fp
mount -t xfs -o rtdev=/dev/sdb3 /dev/sdb2 /mnt/hr20
xfsdump -J -f /Desktop/xfsdump_hr20 /mnt/hr20
xfsrestore -J -f /Desktop/xfsdump_hr20 /mnt/p

When this is tried, the process starts, but never completes. After 4 hours
it reported 0.0% complete. So it was stopped.

In addition to the data requested previously, I was also asked to add the
output of dmesg, which is included below.

Best,
Jeffrey



Data:


kernel version: Linux jeffrey 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19
10:27:31 UTC 2012 i686 i686 i686 GNU/Linux

xfsprogs version: xfs_repar version 3.1.8

number of CPU's: 8

contents of /proc/meminfo:
MemTotal:        6184324 kB
MemFree:         4986560 kB
Buffers:           32036 kB
Cached:           446368 kB
SwapCached:            0 kB
Active:           680296 kB
Inactive:         402548 kB
Active(anon):     612444 kB
Inactive(anon):      368 kB
Active(file):      67852 kB
Inactive(file):   402180 kB
Unevictable:       32596 kB
Mlocked:           32596 kB
HighTotal:       5365768 kB
HighFree:        4264648 kB
LowTotal:         818556 kB
LowFree:          721912 kB
SwapTotal:       1023996 kB
SwapFree:        1023996 kB
Dirty:              1484 k
Writeback:             0 kB
AnonPages:        637224 kB
Mapped:           148540 kB
Shmem:              1284 kB
Slab:              36908 kB
SReclaimable:      16864 kB
SUnreclaim:        20044 kB
KernelStack:        364 kB
PageTables:         8296 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     4116156 kB
Committed_AS:    3172256 kB
VmallocTotal:     122880 kB
VmallocUsed:       13156 kB
VmallocChunk:     104244 kB
HardwareCorrupted:     0 kB
AnonHugePages:         0 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:        8184 kB
DirectMap2:      905216 kB


contents of /proc/mounts:

rootfs / rootfs rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,relatime,size=3084428knr_inodes=200772,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
0 0 
tmpfs /run tmpfs rw,nosuid,relatime,size=1236868k,mode=755 0 0
/dev/disk/by-uuid/e33b147d-faaa-4e55-8f3b-2fb2d3168053 / ext4
rw,relatime,errors=remount-ro,data=ordered 0 0
none /sys/fs/fuse/connections fusectl rw,relatime 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
none /sys/kernel/security securityfs rw,relatime 0 0
none /run/lock tmpfs rw,nosuid,nodev,noexe,relatime,size=5120k 0 0
none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0
none /run/user tmpfs rw,nosuid,nodev,noexec,relatime,size=102400k,mode=755 0
0 
gvfsd-fuse /run/user/jeffrey/gvfs fuse.gvfsd-fuse
rw,nosuid,node,relatime,user_id=1000,group_id=1000 0 0


contents of /proc/partitions:

major minor  #blocks  name

  11        0    1048575 sr0
   8        0 1953514584 sda
   8        1     530113 sda1
   8        2   15735664 sda2
   8        3 1937246216 sda3
   8       16  488386584 sdb
   8       17     530113 sdb1
   8       18   15735664 sdb2
   8       19  472118216 sdb3
   8       32 1953514584 sdc
   8       33    1024000 sdc1
   8       34 1952489258 sdc2
  11        1    104855 sr1

RAID Layout: no Raid

Type of discs: 2 3.5² SATA drives, 1 half-height SATA.


hdparm results:

/dev/sda: 

ATA device, with non-removable media
    Model Number:       Hitachi HDS723020BLA642
    Serial Number:     MN1240FA04NWHD
    Firmware Revision:  MN6OA800
    Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions,
SATA Rev 2.5, SATA Rev 2.6; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards: 
    Used: unknown (minor revision code 0x0029)
    Supported: 8 7 6 5
    Likely used: 8 
Configuration: 
    Logical        max    current
    cylinders    16383    16383
    heads        16    16
    sectors/track    63    63
    -- 
    CHS current addressable sctors:   16514064
    LBA    user addressable sectors:  268435455
    LBA48  user addressable sectors: 3907029168
    Logical  Sector size:                   512 bytes
    Physical Sector size:                   512 byes
    device size with M = 1024*1024:     1907729 MBytes
    device size with M = 1000*1000:     2000398 MBytes (2000 GB)
    cache/buffer size  = unknown
    Form Factor: 3.5 inch
    Nominal Media Rotation Rate: 7200
Capabilities: 
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, no device specific minimum
    R/W multiple sector transfer: Max = 16    Current = 0
    Advanced power management level: disabled
    DMA: mdma0 mma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
         Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
         Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/featres: 
    Enabled    Supported:
       *    SMART feature set
            Security Mode feature set
       *    Power Management feature set
       *    Write cache
       *    Look-ahead
       *    Host Protected Area feature set
       *    WRITE_BUFFER command
       *    READ_BUFFER command
       *    NOP cmd
       *    DOWNLOAD_MICROCODE
            Advanced Power Management feature set
            Power-Up In Standby feature set
       *    SET_FEATURES required to spinup after power up
       *    SET_MAX security extension
       *    48-bit Address feature set
       *    Device Configuration Overlay feature set
       *    Mandatory FLUSH_CACHE
       *    FLUSH_CACHE_EXT
       *    SMART error logging
       *    SMART self-test
            Media Card Pass-Through
       *    General Purpose Logging feature set
       *    WRIE_{DMA|MULTIPLE}_FUA_EXT
       *    64-bit World wide name
       *    URG for READ_STREAM[_DMA]_EXT
       *    URG for WRITE_STREAM[_DMA]_EXT
       *    WRITE_UNCORRECTABLE_EXT command
       *    {READ,WRITE}_DMA_EXT_GPL commands
       *    Segmented DOWNLOAD_MICROCODE
            unknown 119[7]
       *    Gen1 signaling speed (1.5Gb/s)
       *    Gen2 signaling speed (3.0Gb/s)
       *    Gen3 signaling speed (6.0Gb/s)
       *    Native Command Queueing (NCQ)
       *    Host-initiated interface power management
       *    Phy event counters
       *    NCQ priority information
            Non-Zero buffer offsets in DMA Setup FIS
            DMA Setup Auto-Activate optimization
            Device-initiated interface power management
            In-order data delivery
       *    Software settings preservation
       *    SMART Command Transport (SCT) feature set
       *    SCT LBA Segment Access (AC2)
       *    SCT Error Recovery Control (AC3)
       *    SCT Features Control (AC4)
       *    SCT Data Tables (AC5)
Security: 
    Master password revision code = 65534
        supported 
    not    enabled 
    not    locked 
        frozen 
    not    expired: security count
    not    supported: enhanced erase
    420min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000cca36ac21fe4
    NAA       : 5 
    IEEE OUI    : 000cca
    Unique ID    : 36ac21fe4
Checksum: correct 


/dev/sdb: 

ATA device, with non-removable media
    Model Number:       ST3500312CS
    Serial Number:      6VV60HXR
    Firmware Revision:  SC13
    Transport:          Serial
Standards: 
    Used: unknown (minor revision code 0x0029)
    Supported: 8 7 6 5
    Likely used: 8 
Configuration: 
    Logical        max    current
    cylinders    16383    16383
    heads       16    16
    sectors/track    63    63
    -- 
    CHS current addressable sectors:   16514064
    LBA    user addressable sectors:  268435455
    LBA48  user addressable sectors:  976773168
    Logical/Physical Sector size:           512 bytes
    device size with M = 1024*1024:     476940 MBytes
    device size with M = 1000*1000:      500107 MBytes (500 GB)
    cache/buffer size  = 8192 KBytes
    Nominal Media Rotation Rate: 5900
Capabilities: 
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, no device specific minimum
    R/W multiple sector transfer: Max = 16    Current = ?
    Advanced power management level: 254
    Recommended acoustic management value: 254, current value: 0
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
         Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
         Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features: 
    Enabled    Supported:
       *    SMART feature set
            Scurity Mode feature set
       *    Power Management feature set
       *    Write cache
       *    Look-ahead
       *    Host Protected Area feature set
       *    WRITE_BUFFER command
       *    READ_BUFFER command
       *    DOWNLOAD_MICROCODE
       *    Advanced Power Management feature set
            Power-Up In Standby feature set
            SET_FEATURES required to spinup after power up
       SET_MAX security extension
       *    48-bit Address feature set
       *    Device Configuration Overlay feature set
       *    Mandatory FLUSH_CACHE
       *    FLUSH_CACHE_EXT
       *    SMART error logging
       *    SMART self-test
       *    Media Card Pass-Through
       *    General Purpose Logging feature set
       *   64-bit World wide name
            Write-Read-Verify feature set
       *    WRITE_UNCORRECTABE_EXT command
       *    {READ,WRITE}_DMA_EXT_GPL commands
       *    Segmented DOWNLOAD_MICROCODE
       *    Gen1 signaling speed (1.5Gb/s)
       *    Gen2 signaling speed (3.0Gb/s)
       *    Native Command Queueing (NCQ)
       *    Phy event counters
           Device-initiated interface power management
       *    Software settings preservation
       *    SMART Command Transport (SCT) feature set
       *    SCT Long Sector AccC1)
       *    SCT Error Recovery Control (AC3)
       *    SCT Features Control (AC4)
      *    SCT Data Tables (AC5)
            unknown 206[12] (vendor specific)
Security: 
    Master password revision code = 65534
        supported 
    not    enabled 
    not    locked 
        frozen 
    not    expired: security count
        supported: enhaced erase
    100min for SECURITY ERASE UNIT. 100min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000c500307c5d66
    NAA        : 5 
    IEEE OUI    : 000c50
   Unique ID    : 0307c5d66
Checksum: correct 


/dev/sdc: 

ATA device, with non-removable media    Model Number:       Hitachi 
HDS723020BLA642
    Serial Number:      MN3220F32KR53E
    Firmware Revision:  MN6OA800
    Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions,
SATA Rev 2.5, SATA Rev 2.6; Revision: ATA8-AST T13 Project D1697 Reision 0b
Standards: 
    Used: unknown (minor revision code 0x0029)
    Supported: 8 7 6 5
    Likely used: 8 
Configuration: 
    Logical        max    current
    cylinders    16383    16383
    heads        16    16
    sectors/track    63    63
    -- 
    CHS current addressable sectors:   16514064
    LBA    user addressable sectors:  268435455
    LBA48  user addressable sectors: 3907029168
    Logical  Sector size:                   512 bytes
    Physical Sector size:                   512 bytes
    device size with M = 1024*1024:     1907729 MBytes
    device size with M = 1000*1000:     2000398 MBytes (2000 GB)
    cache/buffer size  = nknown
    Form Factor: 3.5 inch
    Nominal Media Rotation Rate: 7200
Capabilities: 
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, no device specific minimum
    R/W multiple sector transfer: Max = 16    Current = 0
    Advanced power management level: disabled
    DMA: mdma0 mdma1 mdma2 udma udma1 udma2 udma3 udma4 udma5 *udma6
         Cycle time: min=120ns recommended=10ns
    PIO: pio0 pio1 pio2 pio3 pio4
         Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features: 
    Enabled    Supported:
       *    SMART feature set
            Security Mode feature set
       *    Poer Management feature set
       *    Write cache
       *    Look-ahead
      *    Host Protected Area feature set
       *    WRITE_BUFFER command
       *   READ_BUFFER command
       *    NOP cmd
       *    DOWNLOAD_MICROCODE
            Advaced Power Management feature set
            Power-Up In Standby feature set
       *    SET_FEATURESrequired to spinup after power up
       *    SET_MAX security extension
       *    4-bit Address feature set
       *    Device Configuration Overlay feature set
       *   Mandatory FLUSH_CACHE
       *    FLUSH_CACHE_EXT
       *    SMART error logging
       *    SMART self-test
            Media Card Pass-Through
       *    General Purpose Logging feature set
       *    WRITE_{DMA|MULIPLE}_FUA_EXT
       *    64-bit World wide name
       *    URG for READ_STREAM[_DMA]_EXT
       *    URG for WRITE_STREAM[_DMA]_EXT
       *    WRITE_UNCORRECTABLE_EXT command
       *    {READ,WRITE}_DMA_EXT_GPL commands
       *    Segmented DOWNLOAD_MICROCODE
           unknown 119[7]
       *    Gen1 signaling speed (1.5Gb/s)
       *    Gen2 signaling speed (3.0Gb/s)
       *    Gen3 signaling speed (6.0Gb/s)
           Native Command Queueing (NCQ)
       *    Host-initiated interface power managemen
       *    Phy event counters
       *    NCQ priority information
            Non-Zero buffer offsets in DMA Setup FIS
            DMA Setup Auto-Activat optimization
            Device-initiated interface power management
            In-order ata delivery
       *    Software settings preservation
       *    SMART Command Transport (CT) feature set
       *    SCT LBA Segment Access (AC2)
       *    SCT Error Recovery Control (AC3)
       *    SCT Features Control (C4)
       *    SCT Data Tables (AC5)
Security: 
    Master password revision code = 65534
        supported 
    not    enabled 
    not    locked 
        frozen 
    not    expired: security count
    not    supported: enhanced erase
    456min for SECURITY ERASE UNIT.
LogicalUnit WWN Device Identifier: 5000cca369e43c85
    NAA        : 5 
    IEEE OUI    : 000cca
    Unique ID    : 369e43c85
Checksum: correct 


xfs_info:

root@jeffrey:~# xfs_info /mnt/fp
meta-data=/dev/sda2              isize=256    agcount=16, agsize=245869 blks
         =                       sectsz=512   attr=0
data     =                       bsize=4096   blocks=3933904, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2             bsize=4096   ascii-ci=0
log      =internal               bsize=4096   blocks=2560, version=1
         =                       sectsz=512   sunit=0 blks, lazy-count=0
realtime =external               extsz=1048576 blocks=484311554,
rtextents=1891842


root@jeffrey:~# xfs_info /mnt/hr20
meta-data=/dev/sdb2             isize=256    agcount=16, agsize=245869 blks
         =                       sectsz=512   attr=0
data     =                       bsize=4096   blocks=3933904, iaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0
log      =internal               bsize=4096   blocks=2560, version=1
         =                       sectsz=512  sunit=0 blks, lazy-count=0
realtime =external               extsz=1048576 blocks=118029554,
rtextents=461052


dmesg output

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-19-generic (buildd@aatxe) (gcc version
4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #3-Ubuntu SMP Tue Nov 13 17:49:53
UTC 2012 (Ubuntu 3.5.0-19.30-generic 3.5.7)
[    0.00000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx6
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.00000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff]
reserved
[    0.000000] BIOS-e820: [mem 0x000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-000000000000fffff]
reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000773fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007740000-0x0000000077415fff] ACPI
NVS
[    0.000000] BIOS-e820: [mem 0x0000000077416000-0x000000007741efff] ACPI
data
[    0.000000] BIOS-e820: [mem 0x000000007741f000-0x000000007755eff] ACPI
NVS
[    0.000000] BIOS-e820: [mem 0x000000007755f000-0x00000000777fffff] API
data
[    0.000000] BIOS-e820: [mem 0x0000000077800000-0x0000000077ffffff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff]
reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000207ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2. present.
[    0.000000] DMI: Apple Inc. MacPro5,1/Mac-F221BEC8, BIOS
MP51.88Z.007FB03.1010071432 10/07/10
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x208000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranes enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF unachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 base 0078000000 mask FFF8000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabed
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabed
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fec60-0x000fec6f] mapped at
[c00fec60]
[    0.000000 initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory tramoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [me
0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x361fa000-0x370f4fff]
[    0.00000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
[    0.000000] ACPI: XSDT 775ae1c0 00074 (v01 APPLE   Apple00 0000007F
01000013)
[    0.000000] ACPI: FACP 75ab000 000F4 (v04 APPLE   Apple00 0000007F Loki
0000005F)
[    0.000000] ACPI Warnig: Invalid length for Pm1aControlBlock: 32, using
default 16 (20120320/tbfadt-629)
[   0.000000] ACPI: DSDT 775a3000 03EE3 (v01 APPLE   Apple00 00050001 Loki
000005F)
[    0.000000] ACPI: FACS 77415000 00040
[    0.000000] ACPI: ECDT 775ad000 0053 (v01 APPLE   Apple00 00000001 Loki
0000005F)
[    0.000000] ACPI: HPET 775aa000 00038 (v01 APPLE   Apple00 00000001 Loki
0000005F)
[    0.000000] ACPI: APIC 775a8000 001A8 (v02 APPLE   Apple00 00000000 Loki
0000005F)
[    0.000000] ACPI: SSDT 7758e000 1183 (v01  PmRef   CpuPPM 00003000 INTL
20061109)
[    0.000000] ACPI: SSDT7758c000 007D8 (v02    OEM  HdaSlt1 00001000 INTL
20061109)
[    0.000000] ACPI: MCFG775a7000 0003C (v01 APPLE   Apple00 00000001 Loki
0000005F)
[    0.000000] ACPI: DMAR 77588000 00068 (v01 APPLE   Apple00 00000001 Loki
0000005F)
[    0.000000] ACPI: SSDT 7758d000 00B10 (v01 SataRe  SataPri 00001000 INTL
20061109)
[    0.000000] ACPI:SSDT 77587000 00BD0 (v01 SataRe  SataSec 00001000 INTL
20061109)
[    0.000000] ACPI:Local APIC address 0xfee00000
[    0.000000] 7428MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37be000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x000100000x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HihMem  [mem 0x37bfe000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0008efff]
[    0.000000]   node   0: [mem0x00090000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x773fffff]
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 1569678
[    0.000000] free_area_init_node: node 0 pgdat c18a2840, node_mem_map
f20fa200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 14857 pages used for memmap
[    0.000000]   HighMem zone: 1326585 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
8/0x1 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
9/0x21 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
10/0x3 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x23] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
11/0x23 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
12/0x13 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
13/0x33 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
14/0x15 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached.  Processor
15/0x35 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapicid[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC acpi_id[0x15] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled)
[    0.000000] CPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03 high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] ACPI: LPIC_NMI (acpi_id[0x05] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[    0.00000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[    0.000000] ACPI: LPIC_NMI (acpi_id[0x15] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec0000, GSI
0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SP configuration information
[    0.000000] ACPI: HPET i: 0x8086a201 base: 0xfed00000
[    0.000000] 24 Processors exceeds NR_CPUS limit of 8
[    .000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.00000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000008f000 -
000000000090000
[    0.000000] PM:Registered nosave memory: 000000000009f000 -
00000000000a0000[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[    0.00000] e820: [mem 0x78000000-0xed1bfff] available for PCI devices
[    0.000000] Booting parvirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits: nr_cpu_ids:8
nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu f7b7b000 s34176 r0 d23168
u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[   0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[   0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 1553037
[    0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.5.0-19-generic
root=UUID=e33b147d-faaa-4e55-8f3b-2fb2d3168053 ro quiet splash nomodeset
vt.andoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
byts)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[    0.000000] __ex_table already sorted skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 17039232 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory'option if you don't want
memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:00208000)
[    0.000000] Memory: 616828k/8519680k available (5961k kernel code,
110484k reserved, 2932k data, 756k init, 5365768k highmem)
[    0.000000] virtual kernel memory layout:
[    0.00000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18b0000 - 0xc196d000  ( 756 kB)
[    0.000000]       .data : 0xc15d2598 - 0xc18af6c0   (2932 kB)
[    0.000000       .text : 0xc1000000 - 0xc15d2598   (5961 kB)
[    0.000000] Checking if this procesor honours the WP bit even in
supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, Halign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU impleentation.
[    0.000000]  RCU dyntick-idle grace-periodacceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstack, hard=f740a000 soft=f740c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.00000] Fast TSC calibration using PIT
[    0.004000] Detected 2393.960 MHz processor.
    0.000003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4787.92 BogoMIPS (lpj=9575840)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000031] Security Framework initialized
[    0.000048] AppArmor: AppArmor initialized
[    0.000049] Yama: becoming mindful.
[    0.000099] Mount-cache hash table entries 512
[    0.000304] Initializing cgroup subsys cpuact
[    0.000306] Initializing cgroup subsys memory
[    0.000314] Initializig cgroup subsys devices
[    0.000316] Initializing cgroup subsys freeze
[    0.000317] Initializing cgroup subsys blkio
[    0.000319] Initializing cgroup subsys perf_event
[    0.000348] Disabled fast string operations
[    0.000350] CPU: Physical Processor ID: 0
[    0.000351] CPU: Processor Core ID: 0
[    0.000355] mce: CPU supports 9 MCE banks
[    0.000365] CPU0: Thermal monitoring enabled (TM1)
[    0.000371] using mwait in idle threads.
[    0.002266] ACPI: Core revision20120320
[    0.021738] ftrace: allocating 24599 entries in 49 pages
[    0.033254] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.033630] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073245] CPU0: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz
stepping 02
[    0.178209] Performance Events: PEBS fmt1+, 16-deep LBR Westmere events,
Intel PMU driver.
[    0.178215] CPUID marked event: 'bus cycles' unavailable
[    0.178217] ... version:                3
[    0.78218] ... bit width:              48
[    0.178219] ... generic registers:      4
[    0.178220] ... value mask:             0000ffffffffffff
[    0.178221] ... max period:             000000007fffffff
    0.178222] ... fixed-purpose events:   3
[    0.17823] ... event mask:             000000070000000f
[    0.178452] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[    0.178552] CPU 1 irqstacks, hard=f755c000 soft=f755e000
[    0.188972] Initializing CPU#1
[    0.189566] Disabled fast string operations
[    0.178554] Booting Node   0, Processors  #1
[    0.286141] CPU 2 irqstacks, hard=f7598000 soft=f759a000
[    0.296609] Initializing CPU#2
[    0.297154] Disabled fast string operations
[    0.286144]  #2
[    0.299361] CPU 3 irqstacks, hard=f75a4000 soft=f75a6000
[    0.309782] Initializing CPU#3
[    0.310374] Disabled fast string operations
[    0.299364]  #3
[    0.312551] CPU 4 irqstacks, hard=f75bc000 soft=f75be000
[    0.322978] Initializing CPU#4
[    23563] Disabled fast string operations
[    0.312553]  #4
[    0.325764] CPU 5 irqstacks, hard=f5d8000 soft=f75da000
[    0.336189] Initializing CPU#5
[    0.336777] Disabled fast string operations
[    0.325768]  #5
[    0.338942] CPU 6 irqstacks, hard=f75e4000 soft=f75e6000
[    0.34365] Initializing CPU#6
[    0.349955] Disabled fast stringoperations
[    0.338945]  #6
[    0.352157] CPU 7 irqstacks, hard=f7616000 soft=f7618000
[   0.352161]  #7 Ok.
[   0.362580] Initializing CPU#7
[    0.363171] Disabled fast string operations
[    0.365294] Brought up 8 CPUs
[    0.365298] Total of 8 processors activated (38303.65 BogoMIPS).
[    0.374726] devtmpfs: initialized
[    0.374936] EVM: security.selinux
[    0.374937] EVM: security.SMACK64
[    0.374938] EVM: security.capability
[    0.375020] PM: Registering ACPI NVS region [mem 0x77400000-0x77415fff] 
(90112 bytes)
[    0.375023] PM: Registering ACPI NVS region [mem 0x7741f000-0x7755efff] 
(1310720 bytes)
[    0.375950] dummy: 
[    0.375981] RTC time: 14:03:18, date: 12/15/12
[    0.376022] NET: Registered protocol family 16
[    0.376133] Trying to unpack rootfs image as initramfs...
[    0.376183] EISA bus registered
[    0.376271] ACPI FADT declares the system doesn't support PCIe ASPM, so 
disable it
[    0.376273] ACPI: bus type pci registered
[    0.376342] PCI: MMCONFIG for domain 0000 [bus 00-0e] at [mem 
0xe0000000-0xe0efffff] (base 0xe0000000)
[    0.376344] PCI: not using MMCONFIG
[    0.378123] PCI: Using configuration type 1 for base access
[    0.379413] bio: create slab <bio-0> at 0
[    0.379518] ACPI: Added _OSI(Module Device)
[    0.379520] ACPI: Added _OSI(Processor Device)
[    0.379521] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.379523] ACPI: Added _OSI(Processor Aggregator Device)
[    0.381198] ACPI: EC: EC description table is found, configuring boot EC
[    0.397530] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.397887] ACPI: Interpreter enabled
[    0.397894] ACPI: (supports S0 S1 S3 S4 S5)
[    0.397915] ACPI: Using IOAPIC for interrupt routing
[    0.397932] PCI: MMCONFIG for domain 0000 [bus 00-0e] at [mem 
0xe0000000-0xe0efffff] (base 0xe0000000)
[    0.398066] PCI: MMCONFIG at [mem 0xe0000000-0xe0efffff] reserved in ACPI 
motherboard resources
[    0.398068] PCI: Using MMCONFIG for extended config space
[    0.401970] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.402129] ACPI: No dock devices found.
[    0.402134] PCI: Using host bridge windows from ACPI; if necessary, use 
"pci=nocrs" and report a bug
[    0.402450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fd])
[    0.402883] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.402885] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.402888] pci_root PNP0A08:00: host bridge window [mem 
0x000a0000-0x000bffff]
[    0.402890] pci_root PNP0A08:00: host bridge window [mem 
0x000c4000-0x000cbfff]
[    0.402892] pci_root PNP0A08:00: host bridge window [mem 
0x80000000-0xdfffffff]
[    0.402925] PCI host bridge to bus 0000:00
[    0.402927] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.402929] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.402931] pci_bus 0000:00: root bus resource [mem 
0x000a0000-0x000bffff]
[    0.402933] pci_bus 0000:00: root bus resource [mem 
0x000c4000-0x000cbfff]
[    0.402935] pci_bus 0000:00: root bus resource [mem 
0x80000000-0xdfffffff]
[    0.402952] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
[    0.403007] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.403031] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[    0.403087] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.403110] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[    0.403165] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.403190] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[    0.403246] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.403269] pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
[    0.403327] pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
[    0.403384] pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
[    0.403440] pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
[    0.403496] pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
[    0.403553] pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
[    0.403611] pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
[    0.403668] pci 0000:00:0d.7: [8086:341b] type 00 class 0x060000
[    0.403718] pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
[    0.403775] pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
[    0.403831] pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
[    0.403887] pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
[    0.403947] pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
[    0.403999] pci 0000:00:0f.0: [8086:3424] type 00 class 0x110100
[    0.404067] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
[    0.404130] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
[    0.404187] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
[    0.404250] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
[    0.404307] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
[    0.404323] pci 0000:00:13.0: reg 10: [mem 0xa0527000-0xa0527fff]
[    0.404370] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.404389] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[    0.404454] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[    0.404518] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[    0.404580] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[    0.404632] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
[    0.404690] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
[    0.404702] pci 0000:00:16.0: reg 10: [mem 0xa0500000-0xa0503fff 64bit]
[    0.404769] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
[    0.404782] pci 0000:00:16.1: reg 10: [mem 0xa0504000-0xa0507fff 64bit]
[    0.404849] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
[    0.404861] pci 0000:00:16.2: reg 10: [mem 0xa0508000-0xa050bfff 64bit]
[    0.404929] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
[    0.404941] pci 0000:00:16.3: reg 10: [mem 0xa050c000-0xa050ffff 64bit]
[    0.405011] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
[    0.405023] pci 0000:00:16.4: reg 10: [mem 0xa0510000-0xa0513fff 64bit]
[    0.405091] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
[    0.405103] pci 0000:00:16.5: reg 10: [mem 0xa0514000-0xa0517fff 64bit]
[    0.405170] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
[    0.405182] pci 0000:00:16.6: reg 10: [mem 0xa0518000-0xa051bfff 64bit]
[    0.405250] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
[    0.405262] pci 0000:00:16.7: reg 10: [mem 0xa051c000-0xa051ffff 64bit]
[    0.405332] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.405373] pci 0000:00:1a.0: reg 20: [io  0x40e0-0x40ff]
[    0.405424] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.405465] pci 0000:00:1a.1: reg 20: [io  0x40c0-0x40df]
[    0.405515] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.405556] pci 0000:00:1a.2: reg 20: [io  0x40a0-0x40bf]
[    0.405616] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.405637] pci 0000:00:1a.7: reg 10: [mem 0xa0526000-0xa05263ff]
[    0.405725] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.405751] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.405766] pci 0000:00:1b.0: reg 10: [mem 0xa0520000-0xa0523fff 64bit]
[    0.405832] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.405853] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.405921] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.405944] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[    0.406011] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.406034] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[    0.406102] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.406125] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
[    0.406192] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.406215] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    0.406282] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.406305] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[    0.406373] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.406398] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.406439] pci 0000:00:1d.0: reg 20: [io  0x4080-0x409f]
[    0.406494] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.406535] pci 0000:00:1d.1: reg 20: [io  0x4060-0x407f]
[    0.406586] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.406627] pci 0000:00:1d.2: reg 20: [io  0x4040-0x405f]
[    0.406687] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.406708] pci 0000:00:1d.7: reg 10: [mem 0xa0525000-0xa05253ff]
[    0.406796] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.406817] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.406879] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[    0.406993] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
[    0.407008] pci 0000:00:1f.2: reg 10: [io  0x4138-0x413f]
[    0.407015] pci 0000:00:1f.2: reg 14: [io  0x414c-0x414f]
[    0.407023] pci 0000:00:1f.2: reg 18: [io  0x4130-0x4137]
[    0.407031] pci 0000:00:1f.2: reg 1c: [io  0x4148-0x414b]
[    0.407038] pci 0000:00:1f.2: reg 20: [io  0x4020-0x402f]
[    0.407046] pci 0000:00:1f.2: reg 24: [io  0x8000-0x800f]
[    0.407092] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.407107] pci 0000:00:1f.3: reg 10: [mem 0xa0524000-0xa05240ff 64bit]
[    0.407127] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.407160] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[    0.407175] pci 0000:00:1f.5: reg 10: [io  0x4128-0x412f]
[    0.407182] pci 0000:00:1f.5: reg 14: [io  0x4144-0x4147]
[    0.407190] pci 0000:00:1f.5: reg 18: [io  0x4120-0x4127]
[    0.407198] pci 0000:00:1f.5: reg 1c: [io  0x4140-0x4143]
[    0.407205] pci 0000:00:1f.5: reg 20: [io  0x4110-0x411f]
[    0.407213] pci 0000:00:1f.5: reg 24: [io  0x4100-0x410f]
[    0.407299] pci 0000:01:00.0: [111d:8061] type 01 class 0x060400
[    0.407368] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.416305] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[    0.416366] pci 0000:02:02.0: [111d:8061] type 01 class 0x060400
[    0.416448] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[    0.416475] pci 0000:02:04.0: [111d:8061] type 01 class 0x060400
[    0.416552] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[    0.416590] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[    0.416641] pci 0000:02:02.0: PCI bridge to [bus 03-03]
[    0.416693] pci 0000:02:04.0: PCI bridge to [bus 04-04]
[    0.416763] pci 0000:05:00.0: [1002:68b8] type 00 class 0x030000
[    0.416775] pci 0000:05:00.0: reg 10: [mem 0x80000000-0x9fffffff 64bit 
pref]
[    0.416785] pci 0000:05:00.0: reg 18: [mem 0xa0400000-0xa041ffff 64bit]
[    0.416791] pci 0000:05:00.0: reg 20: [io  0x3000-0x30ff]
[    0.416803] pci 0000:05:00.0: reg 30: [mem 0xa0420000-0xa043ffff pref]
[    0.416830] pci 0000:05:00.0: supports D1 D2
[    0.416849] pci 0000:05:00.1: [1002:aa58] type 00 class 0x040300
[    0.416861] pci 0000:05:00.1: reg 10: [mem 0xa0440000-0xa0443fff 64bit]
[    0.416912] pci 0000:05:00.1: supports D1 D2
[    0.424289] pci 0000:00:03.0: PCI bridge to [bus 05-05]
[    0.424294] pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
[    0.424299] pci 0000:00:03.0:   bridge window [mem 0xa0400000-0xa04fffff]
[    0.424305] pci 0000:00:03.0:   bridge window [mem 0x80000000-0x9fffffff 
64bit pref]
[    0.424348] pci 0000:00:07.0: PCI bridge to [bus 06-06]
[    0.424397] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[    0.424442] pci 0000:00:1c.1: PCI bridge to [bus 08-08]
[    0.424514] pci 0000:09:00.0: [8086:10f6] type 00 class 0x020000
[    0.424538] pci 0000:09:00.0: reg 10: [mem 0xa0300000-0xa031ffff]
[    0.424556] pci 0000:09:00.0: reg 14: [mem 0xa0320000-0xa032ffff]
[    0.424573] pci 0000:09:00.0: reg 18: [io  0x2000-0x201f]
[    0.424590] pci 0000:09:00.0: reg 1c: [mem 0xa0330000-0xa0333fff]
[    0.424638] pci 0000:09:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
[    0.424731] pci 0000:09:00.0: PME# supported from D0 D3hot
[    0.432281] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[    0.432286] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.432291] pci 0000:00:1c.2:   bridge window [mem 0xa0300000-0xa03fffff]
[    0.432372] pci 0000:0a:00.0: [8086:10f6] type 00 class 0x020000
[    0.432396] pci 0000:0a:00.0: reg 10: [mem 0xa0200000-0xa021ffff]
[    0.432413] pci 0000:0a:00.0: reg 14: [mem 0xa0220000-0xa022ffff]
[    0.432431] pci 0000:0a:00.0: reg 18: [io  0x1000-0x101f]
[    0.432448] pci 0000:0a:00.0: reg 1c: [mem 0xa0230000-0xa0233fff]
[    0.432496] pci 0000:0a:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
[    0.432588] pci 0000:0a:00.0: PME# supported from D0 D3hot
[    0.440266] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[    0.440271] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.440276] pci 0000:00:1c.3:   bridge window [mem 0xa0200000-0xa02fffff]
[    0.440354] pci 0000:0b:00.0: [104c:823e] type 01 class 0x060400
[    0.440479] pci 0000:0b:00.0: supports D1 D2
[    0.448250] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    0.448258] pci 0000:00:1c.4:   bridge window [mem 0xa0100000-0xa01fffff]
[    0.448365] pci 0000:0c:00.0: [104c:823f] type 00 class 0x0c0010
[    0.448391] pci 0000:0c:00.0: reg 10: [mem 0xa0104000-0xa01047ff]
[    0.448406] pci 0000:0c:00.0: reg 14: [mem 0xa0100000-0xa0103fff]
[    0.448514] pci 0000:0c:00.0: supports D1 D2
[    0.448516] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot
[    0.448584] pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
[    0.448596] pci 0000:0b:00.0:   bridge window [mem 0xa0100000-0xa01fffff]
[    0.448671] pci 0000:0d:00.0: [14e4:432b] type 00 class 0x028000
[    0.448695] pci 0000:0d:00.0: reg 10: [mem 0xa0000000-0xa0003fff 64bit]
[    0.448815] pci 0000:0d:00.0: supports D1 D2
[    0.448817] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0.456237] pci 0000:00:1c.5: PCI bridge to [bus 0d-0d]
[    0.456244] pci 0000:00:1c.5:   bridge window [mem 0xa0000000-0xa00fffff]
[    0.456316] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive 
decode)
[    0.456325] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] 
(subtractive decode)
[    0.456327] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] 
(subtractive decode)
[    0.456329] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] 
(subtractive decode)
[    0.456331] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000cbfff] 
(subtractive decode)
[    0.456334] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff] 
(subtractive decode)
[    0.456370] pci_bus 0000:00: on NUMA node 0
[    0.456373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.456581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.456623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.456664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.456711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.456786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOU2._PRT]
[    0.456824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOU2.I2PS._PRT]
[    0.456886] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.IOU2.I2PS.PPB2._PRT]
[    0.456931] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.IOU2.I2PS.PPB4._PRT]
[    0.456973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOU0._PRT]
[    0.457017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOU1._PRT]
[    0.457122]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.457269]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.467973] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 
14 15)
[    0.468018] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 
14 15)
[    0.468061] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 
14 15)
[    0.468103] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 
14 15)
[    0.468145] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 
15) *0, disabled.
[    0.468189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 
14 15)
[    0.468235] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 
14 15)
[    0.468278] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 
14 15)
[    0.468405] vgaarb: device added: 
PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.468409] vgaarb: loaded
[    0.468410] vgaarb: bridge control possible 0000:05:00.0
[    0.468634] SCSI subsystem initialized
[    0.468719] libata version 3.00 loaded.
[    0.468751] ACPI: bus type usb registered
[    0.468774] usbcore: registered new interface driver usbfs
[    0.468784] usbcore: registered new interface driver hub
[    0.468815] usbcore: registered new device driver usb
[    0.468945] PCI: Using ACPI for IRQ routing
[    0.468949] PCI: pci_cache_line_size set to 64 bytes
[    0.469126] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.469127] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.469129] e820: reserve RAM buffer [mem 0x77400000-0x77ffffff]
[    0.469233] NetLabel: Initializing
[    0.469234] NetLabel:  domain hash size = 128
[    0.469235] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.469244] NetLabel:  unlabeled traffic allowed by default
[    0.469351] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.469356] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.471384] Switching to clocksource hpet
[    0.477779] AppArmor: AppArmor Filesystem Enabled
[    0.477796] pnp: PnP ACPI init
[    0.477805] ACPI: bus type pnp registered
[    0.478059] pnp 00:00: [bus 00-ff]
[    0.478062] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.478064] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.478066] pnp 00:00: [io  0x0d00-0xffff window]
[    0.478068] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.478070] pnp 00:00: [mem 0x000c4000-0x000cbfff window]
[    0.478072] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.478116] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 
(active)
[    0.478125] pnp 00:01: [mem 0xfec00000-0xfecfffff]
[    0.478148] pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active)
[    0.478165] pnp 00:02: [mem 0xe0000000-0xefffffff]
[    0.478169] pnp 00:02: [mem 0xfc000000-0xfcffffff]
[    0.478171] pnp 00:02: [mem 0xfed1a000-0xfed1afff]
[    0.478173] pnp 00:02: [mem 0xfed1b000-0xfed1bfff]
[    0.478174] pnp 00:02: [mem 0xfed1c000-0xfed8bffe]
[    0.478176] pnp 00:02: [mem 0xfe000000-0xfe01ffff]
[    0.478178] pnp 00:02: [mem 0xfe600000-0xfe6fffff]
[    0.478180] pnp 00:02: [mem 0xfe800000-0xfe9fffff]
[    0.478182] pnp 00:02: [mem 0xfeb00000-0xfebfffff]
[    0.478184] pnp 00:02: [mem 0xfec00000-0xfecfffff]
[    0.478185] pnp 00:02: [mem 0xfee00000-0xfeefffff]
[    0.478187] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.478253] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[    0.478256] system 00:02: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.478258] system 00:02: [mem 0xfed1a000-0xfed1afff] has been reserved
[    0.478260] system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    0.478262] system 00:02: [mem 0xfed1c000-0xfed8bffe] could not be 
reserved
[    0.478265] system 00:02: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.478267] system 00:02: [mem 0xfe600000-0xfe6fffff] has been reserved
[    0.478269] system 00:02: [mem 0xfe800000-0xfe9fffff] has been reserved
[    0.478271] system 00:02: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.478274] system 00:02: [mem 0xfec00000-0xfecfffff] could not be 
reserved
[    0.478276] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.478279] system 00:02: [mem 0xff000000-0xffffffff] could not be 
reserved
[    0.478281] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.478410] pnp 00:03: [io  0x0300-0x031f]
[    0.478420] pnp 00:03: [irq 6]
[    0.478450] pnp 00:03: Plug and Play ACPI device, IDs APP0001 (active)
[    0.478460] pnp 00:04: [io  0x0000-0x001f]
[    0.478462] pnp 00:04: [io  0x0081-0x0091]
[    0.478467] pnp 00:04: [io  0x00c0-0x00df]
[    0.478469] pnp 00:04: [dma 4]
[    0.478498] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)

[    0.478505] pnp 00:05: [mem 0xff000000-0xffffffff]
[    0.478534] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.478591] pnp 00:06: [irq 0 disabled]
[    0.478596] pnp 00:06: [irq 8]
[    0.478598] pnp 00:06: [mem 0xfed00000-0xfedfffff]
[    0.478629] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.478641] pnp 00:07: [io  0x00f0]
[    0.478646] pnp 00:07: [irq 13]
[    0.478677] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.478687] pnp 00:08: [io  0x002e-0x002f]
[    0.478688] pnp 00:08: [io  0x004e-0x004f]
[    0.478690] pnp 00:08: [io  0x0061]
[    0.478692] pnp 00:08: [io  0x0080]
[    0.478693] pnp 00:08: [io  0x0092]
[    0.478695] pnp 00:08: [io  0x00b2-0x00b3]
[    0.478697] pnp 00:08: [io  0x00f0]
[    0.478699] pnp 00:08: [io  0x0680-0x069f]
[    0.478700] pnp 00:08: [io  0x0800-0x080f]
[    0.478702] pnp 00:08: [io  0x0810-0x0817]
[    0.478704] pnp 00:08: [io  0x0400-0x047f]
[    0.478705] pnp 00:08: [io  0x0500-0x053f]
[    0.478707] pnp 00:08: [io  0x1640-0x164f]
[    0.478731] pnp 00:08: disabling [io  0x1640-0x164f] because it overlaps 
0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
[    0.478781] system 00:08: [io  0x0680-0x069f] has been reserved
[    0.478783] system 00:08: [io  0x0800-0x080f] has been reserved
[    0.478785] system 00:08: [io  0x0810-0x0817] has been reserved
[    0.478787] system 00:08: [io  0x0400-0x047f] has been reserved
[    0.478789] system 00:08: [io  0x0500-0x053f] has been reserved
[    0.478792] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.478800] pnp 00:09: [io  0x0070-0x0077]
[    0.478834] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.478879] pnp: PnP ACPI: found 10 devices
[    0.478880] ACPI: ACPI bus type pnp unregistered
[    0.478882] PnPBIOS: Disabled by ACPI PNP
[    0.515152] pci 0000:09:00.0: no compatible bridge window for [mem 
0xfffc0000-0xffffffff pref]
[    0.515155] pci 0000:0a:00.0: no compatible bridge window for [mem 
0xfffc0000-0xffffffff pref]
[    0.515279] pci 0000:00:1c.2: BAR 15: assigned [mem 0xa0600000-0xa06fffff 
pref]
[    0.515283] pci 0000:00:1c.3: BAR 15: assigned [mem 0xa0700000-0xa07fffff 
pref]
[    0.515286] pci 0000:02:02.0: PCI bridge to [bus 03-03]
[    0.515299] pci 0000:02:04.0: PCI bridge to [bus 04-04]
[    0.515311] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[    0.515331] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[    0.515339] pci 0000:00:03.0: PCI bridge to [bus 05-05]
[    0.515342] pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
[    0.515346] pci 0000:00:03.0:   bridge window [mem 0xa0400000-0xa04fffff]
[    0.515349] pci 0000:00:03.0:   bridge window [mem 0x80000000-0x9fffffff 
64bit pref]
[    0.515354] pci 0000:00:07.0: PCI bridge to [bus 06-06]
[    0.515362] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[    0.515372] pci 0000:00:1c.1: PCI bridge to [bus 08-08]
[    0.515383] pci 0000:09:00.0: BAR 6: assigned [mem 0xa0600000-0xa063ffff 
pref]
[    0.515385] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[    0.515388] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.515392] pci 0000:00:1c.2:   bridge window [mem 0xa0300000-0xa03fffff]
[    0.515396] pci 0000:00:1c.2:   bridge window [mem 0xa0600000-0xa06fffff 
pref]
[    0.515402] pci 0000:0a:00.0: BAR 6: assigned [mem 0xa0700000-0xa073ffff 
pref]
[    0.515404] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[    0.515406] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.515411] pci 0000:00:1c.3:   bridge window [mem 0xa0200000-0xa02fffff]
[    0.515414] pci 0000:00:1c.3:   bridge window [mem 0xa0700000-0xa07fffff 
pref]
[    0.515420] pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
[    0.515427] pci 0000:0b:00.0:   bridge window [mem 0xa0100000-0xa01fffff]
[    0.515438] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    0.515443] pci 0000:00:1c.4:   bridge window [mem 0xa0100000-0xa01fffff]
[    0.515450] pci 0000:00:1c.5: PCI bridge to [bus 0d-0d]
[    0.515454] pci 0000:00:1c.5:   bridge window [mem 0xa0000000-0xa00fffff]
[    0.515461] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[    0.515543] pci 0000:00:1e.0: setting latency timer to 64
[    0.515546] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.515548] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.515550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.515552] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000cbfff]
[    0.515554] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[    0.515556] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.515558] pci_bus 0000:05: resource 1 [mem 0xa0400000-0xa04fffff]
[    0.515560] pci_bus 0000:05: resource 2 [mem 0x80000000-0x9fffffff 64bit 
pref]
[    0.515562] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.515564] pci_bus 0000:09: resource 1 [mem 0xa0300000-0xa03fffff]
[    0.515566] pci_bus 0000:09: resource 2 [mem 0xa0600000-0xa06fffff pref]
[    0.515568] pci_bus 0000:0a: resource 0 [io  0x1000-0x1fff]
[    0.515570] pci_bus 0000:0a: resource 1 [mem 0xa0200000-0xa02fffff]
[    0.515572] pci_bus 0000:0a: resource 2 [mem 0xa0700000-0xa07fffff pref]
[    0.515574] pci_bus 0000:0b: resource 1 [mem 0xa0100000-0xa01fffff]
[    0.515576] pci_bus 0000:0c: resource 1 [mem 0xa0100000-0xa01fffff]
[    0.515578] pci_bus 0000:0d: resource 1 [mem 0xa0000000-0xa00fffff]
[    0.515580] pci_bus 0000:0e: resource 4 [io  0x0000-0x0cf7]
[    0.515581] pci_bus 0000:0e: resource 5 [io  0x0d00-0xffff]
[    0.515583] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[    0.515585] pci_bus 0000:0e: resource 7 [mem 0x000c4000-0x000cbfff]
[    0.515587] pci_bus 0000:0e: resource 8 [mem 0x80000000-0xdfffffff]
[    0.515619] NET: Registered protocol family 2
[    0.515679] IP route cache hash table entries: 32768 (order: 5, 131072 
bytes)
[    0.515828] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[    0.516039] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.516142] TCP: Hash tables configured (established 131072 bind 65536)
[    0.516143] TCP: reno registered
[    0.516146] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.516150] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.516199] NET: Registered protocol family 1
[    0.516446] pci 0000:05:00.0: Boot video device
[    0.516454] PCI: CLS mismatch (256 != 64), using 64 bytes
[    0.516460] DMAR: Host address width 40
[    0.516462] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
[    0.516469] IOMMU 0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 
ecap f0207e
[    0.516470] DMAR: ATSR flags: 0x0
[    0.517117] audit: initializing netlink socket (disabled)
[    0.517124] type=2000 audit(1355580198.384:1): initialized
[    0.537803] highmem bounce pool size: 64 pages
[    0.537815] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.540296] VFS: Disk quotas dquot_6.5.2
[    0.540344] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.540837] fuse init (API version 7.19)
[    0.540917] msgmni has been set to 1567
[    0.541333] Block layer SCSI generic (bsg) driver version 0.4 loaded 
(major 252)
[    0.541370] io scheduler noop registered
[    0.541373] io scheduler deadline registered (default)
[    0.541381] io scheduler cfq registered
[    0.541569] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.541666] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[    0.541756] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[    0.541854] pcieport 0000:00:1c.0: irq 43 for MSI/MSI-X
[    0.541954] pcieport 0000:00:1c.1: irq 44 for MSI/MSI-X
[    0.542054] pcieport 0000:00:1c.2: irq 45 for MSI/MSI-X
[    0.542149] pcieport 0000:00:1c.3: irq 46 for MSI/MSI-X
[    0.542247] pcieport 0000:00:1c.4: irq 47 for MSI/MSI-X
[    0.542348] pcieport 0000:00:1c.5: irq 48 for MSI/MSI-X
[    0.542532] pcieport 0000:02:02.0: irq 49 for MSI/MSI-X
[    0.542656] pcieport 0000:02:04.0: irq 50 for MSI/MSI-X
[    0.542768] aer 0000:00:01.0:pcie02: service driver aer loaded
[    0.542793] aer 0000:00:03.0:pcie02: service driver aer loaded
[    0.542818] aer 0000:00:07.0:pcie02: service driver aer loaded
[    0.542832] pcieport 0000:00:01.0: Signaling PME through PCIe PME 
interrupt
[    0.542834] pcieport 0000:01:00.0: Signaling PME through PCIe PME 
interrupt
[    0.542836] pcieport 0000:02:02.0: Signaling PME through PCIe PME 
interrupt
[    0.542837] pcieport 0000:02:04.0: Signaling PME through PCIe PME 
interrupt
[    0.542841] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.542848] pcieport 0000:00:03.0: Signaling PME through PCIe PME 
interrupt
[    0.542849] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.542851] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
[    0.542854] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[    0.542861] pcieport 0000:00:07.0: Signaling PME through PCIe PME 
interrupt
[    0.542864] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[    0.542879] pcieport 0000:00:1c.0: Signaling PME through PCIe PME 
interrupt
[    0.542883] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.542897] pcieport 0000:00:1c.1: Signaling PME through PCIe PME 
interrupt
[    0.542901] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.542916] pcieport 0000:00:1c.2: Signaling PME through PCIe PME 
interrupt
[    0.542917] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    0.542921] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.542935] pcieport 0000:00:1c.3: Signaling PME through PCIe PME 
interrupt
[    0.542937] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
[    0.542941] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.542957] pcieport 0000:00:1c.4: Signaling PME through PCIe PME 
interrupt
[    0.542959] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[    0.542961] pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
[    0.542964] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.542979] pcieport 0000:00:1c.5: Signaling PME through PCIe PME 
interrupt
[    0.542981] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[    0.542984] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.542997] ioapic: probe of 0000:00:13.0 failed with error -22
[    0.543001] ioapic: probe of 0000:00:15.0 failed with error -22
[    0.543011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.543034] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.543099] intel_idle: MWAIT substates: 0x1120
[    0.543100] intel_idle: v0.4 model 0x2C
[    0.543101] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.543193] input: Power Button as 
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.543197] ACPI: Power Button [PWRB]
[    0.543234] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.543236] ACPI: Power Button [PWRF]
[    0.543298] ACPI: Requesting acpi_cpufreq
[    0.667496] Freeing initrd memory: 15340k freed
[    0.672884] GHES: HEST is not enabled!
[    0.672934] isapnp: Scanning for PnP cards...
[    0.672962] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.674204] Linux agpgart interface v0.103
[    0.675598] brd: module loaded
[    0.676292] loop: module loaded
[    0.676440] ata_piix 0000:00:1f.2: version 2.13
[    0.676451] ata_piix 0000:00:1f.2: MAP [
[    0.676452]  P0 P2 P1 P3 ]
[    0.676491] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.676753] scsi0 : ata_piix
[    0.676826] scsi1 : ata_piix
[    0.677364] ata1: SATA max UDMA/133 cmd 0x4138 ctl 0x414c bmdma 0x4020 
irq 17
[    0.677369] ata2: SATA max UDMA/133 cmd 0x4130 ctl 0x4148 bmdma 0x4028 
irq 17
[    0.677385] ata_piix 0000:00:1f.5: MAP [
[    0.677386]  P0 -- P1 -- ]
[    0.677418] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.677590] scsi2 : ata_piix
[    0.677658] scsi3 : ata_piix
[    0.678033] ata3: SATA max UDMA/133 cmd 0x4128 ctl 0x4144 bmdma 0x4110 
irq 17
[    0.678036] ata4: SATA max UDMA/133 cmd 0x4120 ctl 0x4140 bmdma 0x4118 
irq 17
[    0.678361] Fixed MDIO Bus: probed
[    0.678415] tun: Universal TUN/TAP device driver, 1.6
[    0.678416] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.678461] PPP generic driver version 2.4.2
[    0.678503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.678535] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.678538] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.678543] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus 
number 1
[    0.678570] ehci_hcd 0000:00:1a.7: debug port 1
[    0.682445] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.682458] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xa0526000
[    0.691041] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.691064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.691067] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.691070] usb usb1: Product: EHCI Host Controller
[    0.691073] usb usb1: Manufacturer: Linux 3.5.0-19-generic ehci_hcd
[    0.691076] usb usb1: SerialNumber: 0000:00:1a.7
[    0.691177] hub 1-0:1.0: USB hub found
[    0.691182] hub 1-0:1.0: 6 ports detected
[    0.691263] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.691266] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.691270] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 2
[    0.691291] ehci_hcd 0000:00:1d.7: debug port 1
[    0.695178] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.695193] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xa0525000
[    0.707016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.707036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.707039] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.707042] usb usb2: Product: EHCI Host Controller
[    0.707045] usb usb2: Manufacturer: Linux 3.5.0-19-generic ehci_hcd
[    0.707047] usb usb2: SerialNumber: 0000:00:1d.7
[    0.707139] hub 2-0:1.0: USB hub found
[    0.707142] hub 2-0:1.0: 6 ports detected
[    0.707215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.707236] uhci_hcd: USB Universal Host Controller Interface driver
[    0.707254] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.707257] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.707263] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus 
number 3
[    0.707285] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[    0.707311] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.707313] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.707315] usb usb3: Product: UHCI Host Controller
[    0.707317] usb usb3: Manufacturer: Linux 3.5.0-19-generic uhci_hcd
[    0.707319] usb usb3: SerialNumber: 0000:00:1a.0
[    0.707401] hub 3-0:1.0: USB hub found
[    0.707405] hub 3-0:1.0: 2 ports detected
[    0.707470] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.707473] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.707477] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus 
number 4
[    0.707507] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[    0.707532] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.707534] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.707535] usb usb4: Product: UHCI Host Controller
[    0.707537] usb usb4: Manufacturer: Linux 3.5.0-19-generic uhci_hcd
[    0.707539] usb usb4: SerialNumber: 0000:00:1a.1
[    0.707622] hub 4-0:1.0: USB hub found
[    0.707626] hub 4-0:1.0: 2 ports detected
[    0.707688] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.707691] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.707695] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus 
number 5
[    0.707724] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000040a0
[    0.707749] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.707751] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.707753] usb usb5: Product: UHCI Host Controller
[    0.707755] usb usb5: Manufacturer: Linux 3.5.0-19-generic uhci_hcd
[    0.707756] usb usb5: SerialNumber: 0000:00:1a.2
[    0.707830] hub 5-0:1.0: USB hub found
[    0.707834] hub 5-0:1.0: 2 ports detected
[    0.707897] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.707900] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.707903] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 6
[    0.707932] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[    0.707961] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.707963] usb usb6: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.707965] usb usb6: Product: UHCI Host Controller
[    0.707967] usb usb6: Manufacturer: Linux 3.5.0-19-generic uhci_hcd
[    0.707968] usb usb6: SerialNumber: 0000:00:1d.0
[    0.708042] hub 6-0:1.0: USB hub found
[    0.708045] hub 6-0:1.0: 2 ports detected
[    0.708107] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.708110] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.708114] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 7
[    0.708135] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[    0.708160] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.708162] usb usb7: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.708164] usb usb7: Product: UHCI Host Controller
[    0.708165] usb usb7: Manufacturer: Linux 3.5.0-19-generic uhci_hcd
[    0.708167] usb usb7: SerialNumber: 0000:00:1d.1
[    0.708241] hub 7-0:1.0: USB hub found
[    0.708244] hub 7-0:1.0: 2 ports detected
[    0.708306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.708309] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.708312] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 8
[    0.708334] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    0.708359] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.708361] usb usb8: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.708363] usb usb8: Product: UHCI Host Controller
[    0.708364] usb usb8: Manufacturer: Linux 3.5.0-19-generic uhci_hcd
[    0.708366] usb usb8: SerialNumber: 0000:00:1d.2
[    0.708440] hub 8-0:1.0: USB hub found
[    0.708446] hub 8-0:1.0: 2 ports detected
[    0.708566] usbcore: registered new interface driver libusual
[    0.708602] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.709468] i8042: No controller found
[    0.709519] mousedev: PS/2 mouse device common for all mice
[    0.709623] rtc_cmos 00:09: RTC can wake from S4
[    0.709730] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    0.709755] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.709793] device-mapper: uevent: version 1.0.3
[    0.709848] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: 
dm-devel@xxxxxxxxxx
[    0.709877] EISA: Probing bus 0 at eisa.0
[    0.709879] EISA: Cannot allocate resource for mainboard
[    0.709881] Cannot allocate resource for EISA slot 1
[    0.709883] Cannot allocate resource for EISA slot 2
[    0.709884] Cannot allocate resource for EISA slot 3
[    0.709886] Cannot allocate resource for EISA slot 4
[    0.709887] Cannot allocate resource for EISA slot 5
[    0.709889] Cannot allocate resource for EISA slot 6
[    0.709890] Cannot allocate resource for EISA slot 7
[    0.709892] Cannot allocate resource for EISA slot 8
[    0.709893] EISA: Detected 0 cards.
[    0.710022] cpuidle: using governor ladder
[    0.710185] cpuidle: using governor menu
[    0.710186] EFI Variables Facility v0.08 2004-May-17
[    0.710342] ashmem: initialized
[    0.710465] TCP: cubic registered
[    0.710560] NET: Registered protocol family 10
[    0.710727] NET: Registered protocol family 17
[    0.710737] Key type dns_resolver registered
[    0.710797] Using IPI No-Shortcut mode
[    0.710881] PM: Hibernation image not present or could not be loaded.
[    0.710888] registered taskstats version 1
[    0.713358] Key type trusted registered
[    0.714992] Key type encrypted registered
[    0.717608]   Magic number: 8:162:81
[    0.717680] rtc_cmos 00:09: setting system clock to 2012-12-15 14:03:18 
UTC (1355580198)
[    0.717950] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.717951] EDD information not available.
[    1.002508] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.005167] ata4: SATA link down (SStatus 0 SControl 300)
[    1.025219] isapnp: No Plug & Play device found
[    1.135599] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[    1.135603] usb 1-2: New USB device strings: Mfr=0, Product=1, 
SerialNumber=0
[    1.135606] usb 1-2: Product: USB2.0 Hub
[    1.136010] hub 1-2:1.0: USB hub found
[    1.136346] hub 1-2:1.0: 4 ports detected
[    1.158267] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.166511] ata3.00: ATA-8: Hitachi HDS723020BLA642, MN6OA800, max 
UDMA/133
[    1.166515] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    1.174483] ata3.00: configured for UDMA/133
[    1.413790] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.469760] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.469773] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.480533] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.480546] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.486037] ata2.01: ATA-8: ST3500312CS, SC13, max UDMA/133
[    1.486041] ata2.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    1.493790] ata1.00: ATAPI: HL-DT-ST DVD-RW GH61N, PA03, max UDMA/100
[    1.493943] ata1.01: ATA-8: Hitachi HDS723020BLA642, MN6OA800, max 
UDMA/133
[    1.493946] ata1.01: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    1.501972] ata2.01: configured for UDMA/133
[    1.509763] ata1.00: configured for UDMA/100
[    1.513617] Refined TSC clocksource calibration: 2393.999 MHz.
[    1.513621] Switching to clocksource tsc
[    1.517886] ata1.01: configured for UDMA/133
[    1.522381] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RW GH61N     
PA03 PQ: 0 ANSI: 5
[    1.527842] sr0: scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray
[    1.527845] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.527964] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.528030] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.529474] scsi 0:0:1:0: Direct-Access     ATA      Hitachi HDS72302 
MN6O PQ: 0 ANSI: 5
[    1.529591] sd 0:0:1:0: [sda] 3907029168 512-byte logical blocks: (2.00 
TB/1.81 TiB)
[    1.529618] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.529623] sd 0:0:1:0: [sda] Write Protect is off
[    1.529625] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.529639] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.540870]  sda: sda1 sda2 sda3
[    1.541140] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.541217] scsi 1:0:1:0: Direct-Access     ATA      ST3500312CS      
SC13 PQ: 0 ANSI: 5

[    1.541295] sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 
GB/465 GiB)
[    1.541323] sd 1:0:1:0: Attached scsi generic sg2 type 0
[    1.541325] sd 1:0:1:0: [sdb] Write Protect is off
[    1.541327] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.541340] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.593451]  sdb: sdb1 sdb2 sdb3
[    1.593693] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.593760] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDS72302 
MN6O PQ: 0 ANSI: 5
[    1.593835] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 
TB/1.81 TiB)
[    1.593864] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    1.593865] sd 2:0:0:0: [sdc] Write Protect is off
[    1.593867] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.593879] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.609890]  sdc: sdc1 sdc2
[    1.610091] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.610189] Freeing unused kernel memory: 756k freed
[    1.610393] Write protecting the kernel text: 5964k
[    1.610411] Write protecting the kernel read-only data: 2424k
[    1.610412] NX-protecting the kernel data: 4276k
[    1.624806] udevd[129]: starting version 175
[    1.651676] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[    1.651679] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[    1.651704] e1000e 0000:09:00.0: Disabling ASPM L0s L1
[    1.651826] e1000e 0000:09:00.0: Interrupt Throttling Rate (ints/sec) set 
to dynamic conservative mode
[    1.651909] e1000e 0000:09:00.0: irq 51 for MSI/MSI-X
[    1.651916] e1000e 0000:09:00.0: irq 52 for MSI/MSI-X
[    1.651922] e1000e 0000:09:00.0: irq 53 for MSI/MSI-X
[    1.669387] ssb: Found chip with id 0x4322, rev 0x01 and package 0x0A
[    1.669397] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 
0x4243)
[    1.669405] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 
0x4243)
[    1.669413] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
[    1.669423] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
[    1.669429] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 
0x4243)
[    1.669436] ssb: Core 5 found: UNKNOWN (cc 0x8FF, rev 0x00, vendor 
0x4243)
[    1.669442] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, 
vendor 0x4243)
[    1.709350] firewire_ohci 0000:0c:00.0: added OHCI v1.10 device as card 
0, 8 IR + 8 IT contexts, quirks 0x2
[    1.749319] ssb: Sonics Silicon Backplane found on PCI device 
0000:0d:00.0
[    1.760561] e1000e 0000:09:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 
e8:06:88:ce:6c:b2
[    1.760563] e1000e 0000:09:00.0: eth0: Intel(R) PRO/1000 Network 
Connection
[    1.760576] e1000e 0000:09:00.0: eth0: MAC: 3, PHY: 8, PBA No: 140FFF-0FF
[    1.760592] e1000e 0000:0a:00.0: Disabling ASPM L0s L1
[    1.760701] e1000e 0000:0a:00.0: Interrupt Throttling Rate (ints/sec) set 
to dynamic conservative mode
[    1.760784] e1000e 0000:0a:00.0: irq 54 for MSI/MSI-X
[    1.760790] e1000e 0000:0a:00.0: irq 55 for MSI/MSI-X
[    1.760797] e1000e 0000:0a:00.0: irq 56 for MSI/MSI-X
[    1.822233] EXT4-fs (sdc2): INFO: recovery required on readonly 
filesystem
[    1.822236] EXT4-fs (sdc2): write access will be enabled during recovery
[    1.869434] e1000e 0000:0a:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 
e8:06:88:ce:53:eb
[    1.869437] e1000e 0000:0a:00.0: eth1: Intel(R) PRO/1000 Network 
Connection
[    1.869450] e1000e 0000:0a:00.0: eth1: MAC: 3, PHY: 8, PBA No: 140FFF-0FF
[    2.208512] firewire_core 0000:0c:00.0: created device fw0: GUID 
dc2b61fffeec8a52, S800
[    2.230306] firewire_core 0000:0c:00.0: created device fw1: GUID 
0001f2000008be73, S400
[    2.230309] firewire_core 0000:0c:00.0: phy config: new root=ffc0, 
gap_count=63
[    2.418217] EXT4-fs (sdc2): recovery complete
[    2.424909] EXT4-fs (sdc2): mounted filesystem with ordered data mode. 
Opts: (null)
[    6.537056] usb 2-1: unable to read config index 0 descriptor/start: -110
[    6.537061] usb 2-1: chopping to 0 config(s)
[    6.537792] usb 2-1: New USB device found, idVendor=0baf, idProduct=0303
[    6.537795] usb 2-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=10
[    6.537798] usb 2-1: Product: \xffffffd0\xffffff89\xffffff89
[    6.537801] usb 2-1: Manufacturer: \xffffffd0\xffffff89\xffffff89
[    6.537803] usb 2-1: SerialNumber: USB Modem
[    6.537897] usb 2-1: no configuration chosen from 0 choices
[    6.648763] usb 2-3: new high-speed USB device number 3 using ehci_hcd
[    6.780877] usb 2-3: New USB device found, idVendor=05ac, idProduct=9126
[    6.780881] usb 2-3: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[    6.781164] hub 2-3:1.0: USB hub found
[    6.781248] hub 2-3:1.0: 6 ports detected
[    7.020126] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[    7.189368] usb 4-2: New USB device found, idVendor=088e, idProduct=5036
[    7.189373] usb 4-2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    7.189376] usb 4-2: Product: iLok
[    7.189379] usb 4-2: Manufacturer: iLok
[    7.263723] firewire_core 0000:0c:00.0: created device fw2: GUID 
00d04b87170268cd, S400
[    7.431411] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    7.609860] usb 5-1: New USB device found, idVendor=0a5c, idProduct=4500
[    7.609864] usb 5-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    7.609866] usb 5-1: Product: BRCM2046 Hub
[    7.609869] usb 5-1: Manufacturer: Apple Inc.
[    7.612896] hub 5-1:1.0: USB hub found
[    7.614855] hub 5-1:1.0: 3 ports detected
[    7.946864] usb 1-2.3: new high-speed USB device number 5 using ehci_hcd
[    8.038704] usb 1-2.3: New USB device found, idVendor=0409, 
idProduct=005a
[    8.038710] usb 1-2.3: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[    8.038989] hub 1-2.3:1.0: USB hub found
[    8.039073] hub 1-2.3:1.0: 4 ports detected
[    8.110577] usb 1-2.4: new high-speed USB device number 6 using ehci_hcd
[    8.203293] usb 1-2.4: New USB device found, idVendor=05e3, 
idProduct=0608
[    8.203298] usb 1-2.4: New USB device strings: Mfr=0, Product=1, 
SerialNumber=0
[    8.203301] usb 1-2.4: Product: USB2.0 Hub
[    8.203702] hub 1-2.4:1.0: USB hub found
[    8.204037] hub 1-2.4:1.0: 4 ports detected
[    8.401834] usb 2-3.1: new high-speed USB device number 4 using ehci_hcd
[    8.498164] usb 2-3.1: New USB device found, idVendor=05ac, 
idProduct=1297
[    8.498167] usb 2-3.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    8.498170] usb 2-3.1: Product: iPhone
[    8.498173] usb 2-3.1: Manufacturer: Apple Inc.
[    8.498175] usb 2-3.1: SerialNumber: 
9c67b5e0c851ad2c41df1e10a3025c4f3cf71461
[    8.697325] usb 2-3.2: new high-speed USB device number 5 using ehci_hcd
[    8.797650] usb 2-3.2: New USB device found, idVendor=05ac, 
idProduct=1006
[    8.797653] usb 2-3.2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    8.797656] usb 2-3.2: Product: Keyboard Hub
[    8.797659] usb 2-3.2: Manufacturer: Apple, Inc.
[    8.797661] usb 2-3.2: SerialNumber: 000000000000
[    8.797935] hub 2-3.2:1.0: USB hub found
[    8.798023] hub 2-3.2:1.0: 3 ports detected
[    8.884995] usb 2-3.4: new full-speed USB device number 6 using ehci_hcd
[    8.984822] usb 2-3.4: New USB device found, idVendor=05ac, 
idProduct=1105
[    8.984825] usb 2-3.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    8.984827] usb 2-3.4: Product: Display Audio
[    8.984828] usb 2-3.4: Manufacturer: Apple Inc.
[    8.984830] usb 2-3.4: SerialNumber: 21414402
[    9.056704] usb 2-3.5: new high-speed USB device number 7 using ehci_hcd
[    9.167386] usb 2-3.5: New USB device found, idVendor=05ac, 
idProduct=8508
[    9.167389] usb 2-3.5: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    9.167392] usb 2-3.5: Product: Display iSight
[    9.167395] usb 2-3.5: Manufacturer: Apple Inc.
[    9.167397] usb 2-3.5: SerialNumber: 8TACU01G4BS03F00
[    9.240388] usb 2-3.6: new full-speed USB device number 8 using ehci_hcd
[    9.349447] usb 2-3.6: New USB device found, idVendor=05ac, 
idProduct=9226
[    9.349451] usb 2-3.6: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0

[    9.349453] usb 2-3.6: Product: Apple LED Cinema Display
[    9.349456] usb 2-3.6: Manufacturer: Apple Inc.
[    9.421739] usb 5-1.1: new full-speed USB device number 3 using uhci_hcd
[    9.559499] usb 5-1.1: New USB device found, idVendor=05ac, 
idProduct=8215
[    9.559503] usb 5-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    9.559506] usb 5-1.1: Product: Bluetooth USB Host Controller
[    9.559508] usb 5-1.1: Manufacturer: Apple Inc.
[    9.559511] usb 5-1.1: SerialNumber: 78CA39CD0990
[    9.637367] usb 5-1.2: new full-speed USB device number 4 using uhci_hcd
[    9.759157] usb 5-1.2: New USB device found, idVendor=05ac, 
idProduct=820a
[    9.759161] usb 5-1.2: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[    9.837023] usb 5-1.3: new full-speed USB device number 5 using uhci_hcd
[    9.958813] usb 5-1.3: New USB device found, idVendor=05ac, 
idProduct=820b
[    9.958817] usb 5-1.3: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[   10.046989] usb 1-2.3.4: new full-speed USB device number 7 using 
ehci_hcd
[   10.156295] usb 1-2.3.4: New USB device found, idVendor=03f0, 
idProduct=1d17
[   10.156298] usb 1-2.3.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[   10.156300] usb 1-2.3.4: Product: hp LaserJet 1320 series
[   10.156302] usb 1-2.3.4: Manufacturer: Hewlett-Packard
[   10.156304] usb 1-2.3.4: SerialNumber: 00CNHC5DP1R0
[   10.226801] usb 1-2.4.1: new high-speed USB device number 8 using 
ehci_hcd
[   10.318766] usb 1-2.4.1: New USB device found, idVendor=0409, 
idProduct=005a
[   10.318768] usb 1-2.4.1: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[   10.318914] hub 1-2.4.1:1.0: USB hub found
[   10.319019] hub 1-2.4.1:1.0: 4 ports detected
[   10.390401] usb 2-3.2.2: new low-speed USB device number 9 using ehci_hcd
[   10.488732] usb 2-3.2.2: New USB device found, idVendor=05ac, 
idProduct=0220
[   10.488735] usb 2-3.2.2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[   10.488737] usb 2-3.2.2: Product: Apple Keyboard
[   10.488739] usb 2-3.2.2: Manufacturer: Apple, Inc
[   10.558121] usb 2-3.2.3: new low-speed USB device number 10 using 
ehci_hcd
[   10.655570] usb 2-3.2.3: New USB device found, idVendor=05ac, 
idProduct=0304
[   10.655574] usb 2-3.2.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[   10.655577] usb 2-3.2.3: Product: Apple Optical USB Mouse
[   10.655580] usb 2-3.2.3: Manufacturer: Mitsumi Electric
[   10.713784] Adding 1023996k swap on /dev/sdc1.  Priority:-1 extents:1 
across:1023996k 
[   10.717311] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.717316] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   10.745783] usb 1-2.4.1.4: new high-speed USB device number 9 using 
ehci_hcd
[   10.757843] udevd[427]: starting version 175
[   10.796273] lp: driver loaded but no devices found
[   10.799477] EDAC MC: Ver: 2.1.0
[   10.803186] [drm] Initialized drm 1.1.0 20060810
[   10.808089] [drm] VGACON disable radeon kernel modesetting.
[   10.809007] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.809009] [drm] No driver support for vblank timestamp query.
[   10.809011] [drm] Initialized radeon 1.33.0 20080528 for 0000:05:00.0 on 
minor 0
[   10.809765] dca service started, version 1.12.1
[   10.810189] ioatdma: Intel(R) QuickData Technology Driver 4.00
[   10.810220] ioatdma 0000:00:16.0: can't derive routing for PCI INT A
[   10.810222] ioatdma 0000:00:16.0: PCI INT A: no GSI
[   10.810223]  - using ISA IRQ 11
[   10.810277] ioatdma 0000:00:16.0: irq 57 for MSI/MSI-X
[   10.810866] ioatdma 0000:00:16.1: can't derive routing for PCI INT B
[   10.810868] ioatdma 0000:00:16.1: PCI INT B: no GSI
[   10.810869]  - using ISA IRQ 10
[   10.810913] ioatdma 0000:00:16.1: irq 58 for MSI/MSI-X
[   10.811054] ioatdma 0000:00:16.2: can't derive routing for PCI INT C
[   10.811056] ioatdma 0000:00:16.2: PCI INT C: no GSI
[   10.811057]  - using ISA IRQ 5
[   10.811098] ioatdma 0000:00:16.2: irq 59 for MSI/MSI-X
[   10.811298] ioatdma 0000:00:16.3: can't derive routing for PCI INT D
[   10.811300] ioatdma 0000:00:16.3: PCI INT D: no GSI
[   10.811302]  - using ISA IRQ 11
[   10.811343] ioatdma 0000:00:16.3: irq 60 for MSI/MSI-X
[   10.811528] ioatdma 0000:00:16.4: can't derive routing for PCI INT A
[   10.811531] ioatdma 0000:00:16.4: PCI INT A: no GSI
[   10.811533]  - using ISA IRQ 11
[   10.816191] cfg80211: Calling CRDA to update world regulatory domain
[   10.816493] ioatdma 0000:00:16.4: irq 61 for MSI/MSI-X
[   10.816694] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.816813] ioatdma 0000:00:16.5: can't derive routing for PCI INT B
[   10.816815] ioatdma 0000:00:16.5: PCI INT B: no GSI
[   10.816817]  - using ISA IRQ 10
[   10.816862] ioatdma 0000:00:16.5: irq 62 for MSI/MSI-X
[   10.817051] ioatdma 0000:00:16.6: can't derive routing for PCI INT C
[   10.817054] ioatdma 0000:00:16.6: PCI INT C: no GSI
[   10.817055]  - using ISA IRQ 5
[   10.817109] ioatdma 0000:00:16.6: irq 63 for MSI/MSI-X
[   10.817274] ioatdma 0000:00:16.7: can't derive routing for PCI INT D
[   10.817277] ioatdma 0000:00:16.7: PCI INT D: no GSI
[   10.817278]  - using ISA IRQ 11
[   10.817325] ioatdma 0000:00:16.7: irq 64 for MSI/MSI-X
[   10.817600] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with 
Region \PMIO 1 (20120320/utaddress-251)
[   10.817605] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[   10.817607] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   10.817609] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with 
Region \PMIO 1 (20120320/utaddress-251)
[   10.817612] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[   10.817615] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with 
Region \GPIO 1 (20120320/utaddress-251)
[   10.817618] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[   10.817619] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.824182] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
[   10.828530] usblp 1-2.3.4:1.0: usblp0: USB Bidirectional printer dev 7 if 
0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
[   10.828568] usbcore: registered new interface driver usblp
[   10.837032] Bluetooth: Core ver 2.16
[   10.837742] NET: Registered protocol family 31
[   10.837744] Bluetooth: HCI device and connection manager initialized
[   10.837746] Bluetooth: HCI socket layer initialized
[   10.837747] Bluetooth: L2CAP socket layer initialized
[   10.837750] Bluetooth: SCO socket layer initialized
[   10.838207] usbcore: registered new interface driver btusb
[   10.839543] usbcore: registered new interface driver usbhid
[   10.839545] usbhid: USB HID core driver
[   10.848644] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
[   10.848770] Linux video capture interface: v2.00
[   10.852959] uvcvideo: Found UVC 1.00 device Display iSight (05ac:8508)
[   10.857685] input: Display iSight as 
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.5/2-3.5:1.0/input/input2
[   10.857766] usbcore: registered new interface driver uvcvideo
[   10.857767] USB Video Class driver (1.1.1)
[   10.860484] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0xf
[   10.860582] usb 1-2.4.1.4: New USB device found, idVendor=04b8, 
idProduct=011b
[   10.860585] usb 1-2.4.1.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[   10.860587] usb 1-2.4.1.4: Product: EPSON Scanner
[   10.860589] usb 1-2.4.1.4: Manufacturer: EPSON
[   10.869245] usb 5-1.2: USB disconnect, device number 4
[   10.875316] type=1400 audit(1355580208.671:2): apparmor="STATUS" 
operation="profile_load" name="/sbin/dhclient" pid=630 
comm="apparmor_parser"
[   10.875325] type=1400 audit(1355580208.671:3): apparmor="STATUS" 
operation="profile_replace" name="/sbin/dhclient" pid=643 
comm="apparmor_parser"
[   10.875699] type=1400 audit(1355580208.671:4): apparmor="STATUS" 
operation="profile_load" 
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 
comm="apparmor_parser"
[   10.875712] type=1400 audit(1355580208.671:5): apparmor="STATUS" 
operation="profile_replace" 
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=643 
comm="apparmor_parser"
[   10.875917] type=1400 audit(1355580208.671:6): apparmor="STATUS" 
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" 
pid=630 comm="apparmor_parser"
[   10.875932] type=1400 audit(1355580208.671:7): apparmor="STATUS" 
operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" 
pid=643 comm="apparmor_parser"
[   10.882869] scsi4 : SBP-2 IEEE-1394
[   10.883093] hda_codec: ALC889A: SKU not ready 0x400000f0
[   10.889646] Broadcom 43xx driver loaded [ Features: PNL ]
[   10.896429] input: Apple, Inc Apple Keyboard as 
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/input/in
put3
[   10.896782] apple 0003:05AC:0220.0005: input,hidraw0: USB HID v1.11 
Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-3.2.2/input0
[   10.897947] input: Apple, Inc Apple Keyboard as 
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.1/input/in
put4
[   10.899269] apple 0003:05AC:0220.0006: input,hidraw1: USB HID v1.11 
Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-3.2.2/input1
[   10.899682] input: Mitsumi Electric Apple Optical USB Mouse as 
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2.3/2-3.2.3:1.0/input/in
put5
[   10.900374] apple 0003:05AC:0304.0007: input,hidraw2: USB HID v1.10 Mouse 
[Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1d.7-3.2.3/input0
[   10.901469] cfg80211: World regulatory domain updated:
[   10.901471] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[   10.901473] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 
mBi, 2000 mBm)
[   10.901474] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 
mBi, 2000 mBm)
[   10.901476] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 
mBi, 2000 mBm)
[   10.901477] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 
mBi, 2000 mBm)
[   10.901479] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 
mBi, 2000 mBm)
[   10.902523] input: HDA Intel Line as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.902620] input: HDA Intel Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.903692] hda-intel: 0000:05:00.1: Handle VGA-switcheroo audio client
[   10.903766] snd_hda_intel 0000:05:00.1: irq 66 for MSI/MSI-X
[   10.913607] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work 
properly. Using workaround
[   10.919271] input: HD-Audio Generic HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card2/input8
[   10.983948] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0xf
[   10.985178] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0xf
[   10.985263] b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
[   10.985266] b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not 
found
[   10.985268] b43-phy0 ERROR: You must go to 
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download 
the correct firmware for this driver version. Please carefully read all 
instructions on this website.
[   10.986266] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0xf
[   10.987343] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0xf
[   10.988365] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0xf
[   10.989429] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0xf
[   10.990418] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0xf
[   10.991532] microcode: Microcode Update Driver: v2.00 
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[   11.000013] usb 5-1.3: USB disconnect, device number 5
[   11.002401] ipheth 2-3.1:4.2: Apple iPhone USB Ethernet device attached
[   11.002423] usbcore: registered new interface driver ipheth
[   11.032429] 6:1:1: cannot get freq at ep 0x4
[   11.034372] input: Apple Inc. Display Audio as 
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.4/2-3.4:1.3/input/input9
[   11.034450] hid-generic 0003:05AC:1105.0001: input,hidraw3: USB HID v1.11 
Device [Apple Inc. Display Audio] on usb-0000:00:1d.7-3.4/input3
[   11.035225] applesmc: key=397 fan=6 temp=68 acc=0 lux=0 kbd=0
[   11.035810] hid-generic 0003:05AC:9226.0002: hiddev0,hidraw4: USB HID 
v1.11 Device [Apple Inc. Apple LED Cinema Display] on 
usb-0000:00:1d.7-3.6/input0
[   11.038415] 6:1:2: cannot get freq at ep 0x4
[   11.044400] 6:2:1: cannot get freq at ep 0x84
[   11.045655] usbcore: registered new interface driver snd-usb-audio
[   11.227741] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
[   11.286270] init: failsafe main process (981) killed by TERM signal
[   11.321640] Bluetooth: RFCOMM TTY layer initialized
[   11.321643] Bluetooth: RFCOMM socket layer initialized
[   11.321645] Bluetooth: RFCOMM ver 1.11
[   11.324264] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.324266] Bluetooth: BNEP filters: protocol multicast
[   11.327496] firewire_sbp2 fw2.0: logged in to LUN 0000 (0 retries)
[   11.331494] scsi 4:0:0:0: CD-ROM            MATSHITA BD-MLT SW-5583   
1.00 PQ: 0 ANSI: 0
[   11.338008] sr1: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 
cdda tray
[   11.338139] sr 4:0:0:0: Attached scsi CD-ROM sr1
[   11.338280] sr 4:0:0:0: Attached scsi generic sg4 type 5
[   11.362761] type=1400 audit(1355580209.159:8): apparmor="STATUS" 
operation="profile_replace" name="/sbin/dhclient" pid=1071 
comm="apparmor_parser"
[   11.363049] type=1400 audit(1355580209.159:9): apparmor="STATUS" 
operation="profile_load" 
name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1068 
comm="apparmor_parser"
[   11.363066] type=1400 audit(1355580209.159:10): apparmor="STATUS" 
operation="profile_load" 
name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session
-wrapper" pid=1069 comm="apparmor_parser"
[   11.363158] type=1400 audit(1355580209.159:11): apparmor="STATUS" 
operation="profile_replace" 
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1071 
comm="apparmor_parser"
[   11.452084] ppdev: user-space parallel port driver
[   11.512348] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[   11.512351] vesafb: scrolling: redraw
[   11.512353] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   11.520386] vesafb: framebuffer at 0x80000000, mapped to 0xf8e00000, 
using 5824k, total 5824k
[   11.520569] Console: switching to colour frame buffer device 175x65
[   11.520609] fb0: VESA VGA frame buffer device
[   11.573026] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.573484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.656522] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   11.656865] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   11.659652] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   11.660061] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   11.979104] pci 0000:05:00.0: Invalid ROM contents
[   11.979112] pci 0000:05:00.0: Invalid ROM contents
[   11.979117] pci 0000:05:00.0: Invalid ROM contents
[   11.979121] pci 0000:05:00.0: Invalid ROM contents
[   11.979125] pci 0000:05:00.0: Invalid ROM contents
[   11.979128] pci 0000:05:00.0: Invalid ROM contents
[   11.979132] pci 0000:05:00.0: Invalid ROM contents
[   11.979136] pci 0000:05:00.0: Invalid ROM contents
[   11.979139] pci 0000:05:00.0: Invalid ROM contents
[   11.979143] pci 0000:05:00.0: Invalid ROM contents
[   11.979147] pci 0000:05:00.0: Invalid ROM contents
[   11.979151] pci 0000:05:00.0: Invalid ROM contents
[   11.979154] pci 0000:05:00.0: Invalid ROM contents
[   11.979158] pci 0000:05:00.0: Invalid ROM contents
[   11.979162] pci 0000:05:00.0: Invalid ROM contents
[   11.979166] pci 0000:05:00.0: Invalid ROM contents
[   12.119773] usblp0: removed
[   12.122712] usblp 1-2.3.4:1.0: usblp0: USB Bidirectional printer dev 7 if 
0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
[   13.884800] pci 0000:05:00.0: Invalid ROM contents
[   13.884806] pci 0000:05:00.0: Invalid ROM contents
[   13.884810] pci 0000:05:00.0: Invalid ROM contents
[   13.884814] pci 0000:05:00.0: Invalid ROM contents
[   13.884818] pci 0000:05:00.0: Invalid ROM contents
[   13.884822] pci 0000:05:00.0: Invalid ROM contents
[   13.884826] pci 0000:05:00.0: Invalid ROM contents
[   13.884829] pci 0000:05:00.0: Invalid ROM contents
[   13.884833] pci 0000:05:00.0: Invalid ROM contents
[   13.884837] pci 0000:05:00.0: Invalid ROM contents
[   13.884840] pci 0000:05:00.0: Invalid ROM contents
[   13.884844] pci 0000:05:00.0: Invalid ROM contents
[   13.884848] pci 0000:05:00.0: Invalid ROM contents
[   13.884851] pci 0000:05:00.0: Invalid ROM contents
[   13.884855] pci 0000:05:00.0: Invalid ROM contents
[   13.884858] pci 0000:05:00.0: Invalid ROM contents
[   14.540130] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow 
Control: Rx/Tx
[   14.540455] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.797665] 6:1:1: cannot get freq at ep 0x4
[   18.802655] 6:2:1: cannot get freq at ep 0x84
[   18.852565] 6:1:1: cannot get freq at ep 0x4
[   18.856556] 6:2:1: cannot get freq at ep 0x84
[   18.878518] 6:2:1: cannot get freq at ep 0x84
[   18.889500] 6:1:1: cannot get freq at ep 0x4
[   18.898484] 6:2:1: cannot get freq at ep 0x84
[  295.334213] SGI XFS with ACLs, security attributes, realtime, large 
block/inode numbers, no debug enabled
[  295.389636] XFS (sda2): Mounting Filesystem
[  295.459074] XFS (sda2): Ending clean mount
[  299.575714] [Hardware Error]: Machine check events logged
[  306.341353] XFS (sdb2): Mounting Filesystem
[  306.417096] XFS (sdb2): Ending clean mount









<Prev in Thread] Current Thread [Next in Thread>