[Top] [All Lists]

Re: creating a new 80 TB XFS

To: Richard Ems <richard.ems@xxxxxxxxxxxxxxxxx>
Subject: Re: creating a new 80 TB XFS
From: Richard Ems <richard.ems@xxxxxxxxxxxxxxxxx>
Date: Mon, 01 Oct 2012 16:36:23 +0200
Cc: Eric Sandeen <sandeen@xxxxxxxxxxx>, xfs@xxxxxxxxxxx
In-reply-to: <5069A8A1.4080404@xxxxxxxxxxxxxxxxx>
References: <4F478818.4050803@xxxxxxxxxxxxxxxxx> <4F47AA24.8010209@xxxxxxxxxxx> <5069A8A1.4080404@xxxxxxxxxxxxxxxxx>
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:15.0) Gecko/20120825 Thunderbird/15.0
On 10/01/2012 04:28 PM, Richard Ems wrote:
> On 02/24/2012 04:17 PM, Eric Sandeen wrote:
>>> *MKFS*
>>>> We also heavily use ACLs for almost all of our files. Christoph Hellwig
>>>> suggested in a previous mail to use "-i size=512" on XFS creation, so my
>>>> mkfs.xfs would look something like:
>>>> mkfs.xfs -i size=512 -d su=stripe_size,sw=28 -L Backup_2 /dev/sdX1
>> Be sure the stripe geometry matches the way the raid controller is
>> set up.
>> You know the size of your acls, so you can probably do some testing
>> to find out how well 512-byte inodes keep ACLs in-line.
> Hi Eric,
> This is a reply to an email from you sent 7 months ago ...
> How could I do the testing you were proposing? How can I find out if my
> 512-byte inodes keep our ACLs in-line?
> I am going to create a similar new RAID set, and wanted to check this
> before on the one already in production.
> Thanks,
> Richard

Hi again,

If the "method" is to use "xfs_bmap -a ..." and check for "no extents",
then I found it !

Thanks, sorry for the noise,

Richard Ems       mail: Richard.Ems@xxxxxxxxxxxxxxxxx

Cape Horn Engineering S.L.
C/ Dr. J.J. Dómine 1, 5º piso
46011 Valencia
Tel : +34 96 3242923 / Fax 924

<Prev in Thread] Current Thread [Next in Thread>