xfs
[Top] [All Lists]

[PATCH 16/18] xfstests: Introduce a results directory

To: xfs@xxxxxxxxxxx
Subject: [PATCH 16/18] xfstests: Introduce a results directory
From: Dave Chinner <david@xxxxxxxxxxxxx>
Date: Thu, 26 Jul 2012 19:28:10 +1000
In-reply-to: <1343294892-20991-1-git-send-email-david@xxxxxxxxxxxxx>
References: <1343294892-20991-1-git-send-email-david@xxxxxxxxxxxxx>
From: Dave Chinner <dchinner@xxxxxxxxxx>

Currently each test gets it's sequence number from it's name. It
separates this from the path via basename, and uses it for
outputting full, notrun an dother status/log files. Hence these end
up in the top level directory.

All these output files need to go somewhere other than the top level
directory. Right now the check script is looking for them in the new
test directories (e.g. for the notrun files), but it woul dbe good
to be able to separate the test source form the test output.

Hence create an output directory which has a similar heirarchy to
the test source directory. Create it on demand when we build the
list of tests to run if it doesn't already exist.

Change the high level check script to set up this variable
appropriately for each test that is being run, and to use this new
output directory for it's result files as well. The next commit will
change all the tests themselves to use the new

This is the first (small) step in being able to store test results
in an external location for archival/data mining purposes

Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
 check              |   34 ++++++++++++++------
 common.attr        |    4 +--
 common.defrag      |    4 +--
 common.dump        |   74 +++++++++++++++++++++---------------------
 common.filestreams |    4 +--
 common.log         |   36 ++++++++++-----------
 common.quota       |   18 +++++------
 common.rc          |   90 ++++++++++++++++++++++++++--------------------------
 common.scsi_debug  |    2 +-
 9 files changed, 140 insertions(+), 126 deletions(-)

diff --git a/check b/check
index 44659bb..10b801f 100755
--- a/check
+++ b/check
@@ -36,8 +36,9 @@ here=`pwd`
 FSTYP=xfs
 
 SUPPORTED_TESTS="[0-9][0-9][0-9] [0-9][0-9][0-9][0-9]"
-SRC_DIR="tests"
 SRC_GROUPS="generic shared"
+export SRC_DIR="tests"
+export RESULT_BASE=${RESULT_BASE:="results"}
 
 # generic initialization
 iam=check
@@ -368,6 +369,12 @@ if [ ! -z "$SCRATCH_DEV" ]; then
   fi
 fi
 
+mkdir -p $RESULT_BASE
+if [ ! -d $RESULT_BASE ]; then
+       echo "failed to create results directory $RESULTS_BASE"
+       exit 1;
+fi
+
 seq="check"
 _check_test_fs
 
@@ -379,6 +386,13 @@ do
     # we don't include the tests/ directory in the name output.
     seqnum=`echo $seq | sed -e "s;$SRC_DIR/;;"`
 
+    # Similarly, the result directory needs to replace the tests/
+    # part of the test location.
+    group=`dirname $seq`
+    export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;$RESULT_BASE;"`
+    mkdir -p $RESULT_DIR
+    seqres="$RESULT_BASE/$seqnum"
+
     echo -n "$seqnum"
 
     if $showme
@@ -391,7 +405,7 @@ do
     else
        # really going to try and run this one
        #
-       rm -f $seq.out.bad
+       rm -f $seqres.out.bad
 
        # slashes now in names, sed barfs on them so use grep
        lasttime=`grep -w ^$seq check.time | awk '// {print $2}'`
@@ -400,7 +414,7 @@ do
        else
                echo -n "       "       # prettier output with timestamps.
        fi
-       rm -f core $seq.notrun
+       rm -f core $seqres.notrun
 
        start=`_wallclock`
        $timestamp && echo -n " ["`date "+%T"`"]"
@@ -417,15 +431,15 @@ do
        if [ -f core ]
        then
            echo -n " [dumped core]"
-           mv core $seq.core
+           mv core $RESULT_BASE/$seqnum.core
            err=true
        fi
 
-       if [ -f $seq.notrun ]
+       if [ -f $seqres.notrun ]
        then
            $timestamp || echo -n " [not run] "
            $timestamp && echo " [not run]" && echo -n "        $seqnum -- "
-           cat $seq.notrun
+           cat $seqres.notrun
            notrun="$notrun $seqnum"
        else
            if [ $sts -ne 0 ]
@@ -450,8 +464,8 @@ do
                    echo ""
                else
                    echo " - output mismatch (see $seq.out.bad)"
-                   mv $tmp.out $seq.out.bad
-                   $diff $seq.out $seq.out.bad
+                   mv $tmp.out $seqres.out.bad
+                   $diff $seq.out $seqres.out.bad
                    err=true
                fi
            fi
@@ -467,13 +481,13 @@ do
        n_bad=`expr $n_bad + 1`
        quick=false
     fi
-    if [ ! -f $seq.notrun ]
+    if [ ! -f $seqres.notrun ]
     then
        try="$try $seqnum"
        n_try=`expr $n_try + 1`
         _check_test_fs
     fi
-    
+
     seq="after_$seqnum"
 done
 
diff --git a/common.attr b/common.attr
index 6e2c004..69bcb01 100644
--- a/common.attr
+++ b/common.attr
@@ -129,7 +129,7 @@ _require_acls()
     #
     touch $TEST_DIR/syscalltest
     chacl -l $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
-    cat $TEST_DIR/syscalltest.out >> $here/$seq.full
+    cat $TEST_DIR/syscalltest.out >> $RESULT_DIR/$seq.full
 
     if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
       _notrun "kernel does not support ACLs"
@@ -164,7 +164,7 @@ _require_attrs()
     #
     touch $TEST_DIR/syscalltest
     attr -s "user.xfstests" -V "attr" $TEST_DIR > $TEST_DIR/syscalltest.out 
2>&1
-    cat $TEST_DIR/syscalltest.out >> $here/$seq.full
+    cat $TEST_DIR/syscalltest.out >> $RESULT_DIR/$seq.full
 
     if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
       _notrun "kernel does not support attrs"
diff --git a/common.defrag b/common.defrag
index ea6c14c..e49fa0d 100644
--- a/common.defrag
+++ b/common.defrag
@@ -44,7 +44,7 @@ _require_defrag()
 _extent_count()
 {
        filefrag $1 | awk '{print $2}'
-       filefrag -v $1  >> $seq.full 2>&1
+       filefrag -v $1  >> $RESULT_DIR/$seq.full 2>&1
 }
 
 # Defrag file, check it, and remove it.
@@ -54,7 +54,7 @@ _defrag()
        _extent_count $1
        CSUM_BEFORE=`md5sum $1`
        STAT_BEFORE=`stat -c "a: %x m: %y c: %z" $1`
-       $DEFRAG_PROG -v $1 >> $seq.full 2>&1
+       $DEFRAG_PROG -v $1 >> $RESULT_DIR/$seq.full 2>&1
        _scratch_remount
        STAT_AFTER=`stat -c "a: %x m: %y c: %z" $1`
        CSUM_AFTER=`md5sum $1`
diff --git a/common.dump b/common.dump
index a33dc81..126c540 100644
--- a/common.dump
+++ b/common.dump
@@ -20,7 +20,7 @@
 #
 
 # --- initializations ---
-rm -f $here/$seq.full
+rm -f $RESULT_DIR/$seq.full
 
 if [ -n "$DEBUGDUMP" ]; then
        _dump_debug=-v4
@@ -124,7 +124,7 @@ _check_onl()
     _limit=10
     i=0
     while [ $i -lt $_limit ]; do
-        echo "Checking online..." >>$here/$seq.full
+        echo "Checking online..." >>$RESULT_DIR/$seq.full
        if _mt status >$tmp.status 2>&1; then
            break;
        else
@@ -158,12 +158,12 @@ _check_onl()
 
 _wait_tape()
 {
-    echo "Wait for tape, $dumptape, ..." >>$here/$seq.full
+    echo "Wait for tape, $dumptape, ..." >>$RESULT_DIR/$seq.full
 
     i=0
     while [ $i -lt 20 ]; do
-        echo "Checking status..." >>$here/$seq.full
-       if _mt status 2>&1 | tee -a $here/$seq.full | egrep -i "onl|ready" 
>/dev/null; then
+        echo "Checking status..." >>$RESULT_DIR/$seq.full
+       if _mt status 2>&1 | tee -a $RESULT_DIR/$seq.full | egrep -i 
"onl|ready" >/dev/null; then
            break;
        else
            sleep 1
@@ -177,7 +177,7 @@ _wait_tape()
 #
 _rewind()
 {
-    echo "Initiate rewind..." >>$here/$seq.full
+    echo "Initiate rewind..." >>$RESULT_DIR/$seq.full
     _wait_tape
     _mt rewind >/dev/null
     _wait_tape
@@ -190,7 +190,7 @@ _rewind()
 #
 _erase_soft()
 {
-    echo "Erasing tape" | tee -a $here/$seq.full
+    echo "Erasing tape" | tee -a $RESULT_DIR/$seq.full
     _rewind
     _mt weof 3
     _rewind
@@ -198,7 +198,7 @@ _erase_soft()
 
 _erase_hard()
 {
-    echo "Erasing tape" | tee -a $here/$seq.full
+    echo "Erasing tape" | tee -a $RESULT_DIR/$seq.full
     _mt erase
 }
 
@@ -242,8 +242,8 @@ _wipe_fs()
 {
     _require_scratch
 
-    _scratch_mkfs_xfs >>$here/$seq.full || _fail "mkfs failed"
-    _scratch_mount >>$here/$seq.full || _fail "mount failed"
+    _scratch_mkfs_xfs >>$RESULT_DIR/$seq.full || _fail "mkfs failed"
+    _scratch_mount >>$RESULT_DIR/$seq.full || _fail "mount failed"
 }
 
 #
@@ -294,8 +294,8 @@ _cleanup()
 _stable_fs()
 {
     _saveddir=`pwd`; cd /
-    umount $SCRATCH_MNT >>$here/$seq.full || _fail "unmount failed"
-    _scratch_mount >>$here/$seq.full || _fail "mount failed"
+    umount $SCRATCH_MNT >>$RESULT_DIR/$seq.full || _fail "unmount failed"
+    _scratch_mount >>$RESULT_DIR/$seq.full || _fail "mount failed"
     cd $_saveddir
 }
 
@@ -325,12 +325,12 @@ _create_dumpdir_stress()
     echo "-----------------------------------------------"
     if ! $here/ltp/fsstress $_param -s 1 $FSSTRESS_AVOID -n $_count -d 
$dump_dir >$tmp.out 2>&1
     then
-        echo "    fsstress (count=$_count) returned $? - see $here/$seq.full"
+        echo "    fsstress (count=$_count) returned $? - see 
$RESULT_DIR/$seq.full"
 
-        echo "--------------------------------------"       >>$here/$seq.full
-        echo "output from fsstress:"                        >>$here/$seq.full
-        echo "--------------------------------------"       >>$here/$seq.full
-        cat $tmp.out                                        >>$here/$seq.full
+        echo "--------------------------------------"       
>>$RESULT_DIR/$seq.full
+        echo "output from fsstress:"                        
>>$RESULT_DIR/$seq.full
+        echo "--------------------------------------"       
>>$RESULT_DIR/$seq.full
+        cat $tmp.out                                        
>>$RESULT_DIR/$seq.full
         status=1
     fi
 
@@ -1025,7 +1025,7 @@ _do_dump_sub()
     echo "Dumping to tape..."
     opts="$_dump_debug$dump_args -s $dump_sdir -f $dumptape -M $media_label -L 
$session_label $SCRATCH_MNT"
     echo "xfsdump $opts" | _dir_filter
-    $XFSDUMP_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 #
@@ -1038,7 +1038,7 @@ _do_dump()
     echo "Dumping to tape..."
     opts="$_dump_debug$dump_args -f $dumptape -M $media_label -L 
$session_label $SCRATCH_MNT"
     echo "xfsdump $opts" | _dir_filter
-    $XFSDUMP_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 
@@ -1053,7 +1053,7 @@ _do_dump_min()
     onemeg=1048576
     opts="$_dump_debug$dump_args -m -b $onemeg -l0 -f $dumptape -M 
$media_label -L $session_label $SCRATCH_MNT"
     echo "xfsdump $opts" | _dir_filter
-    $XFSDUMP_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 
@@ -1067,7 +1067,7 @@ _do_dump_file()
     echo "Dumping to file..."
     opts="$_dump_debug$dump_args -f $dump_file -M $media_label -L 
$session_label $SCRATCH_MNT"
     echo "xfsdump $opts" | _dir_filter
-    $XFSDUMP_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 #
@@ -1089,7 +1089,7 @@ _do_dump_multi_file()
     echo "Dumping to files..."
     opts="$_dump_debug$dump_args $multi_args -L $session_label $SCRATCH_MNT"
     echo "xfsdump $opts" | _dir_filter
-    $XFSDUMP_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSDUMP_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 
@@ -1122,7 +1122,7 @@ _do_restore()
     echo "Restoring from tape..."
     opts="$_restore_debug$restore_args -f $dumptape  -L $session_label 
$restore_dir"
     echo "xfsrestore $opts" | _dir_filter
-    $XFSRESTORE_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 #
@@ -1137,7 +1137,7 @@ _do_restore_min()
     onemeg=1048576
     opts="$_restore_debug$restore_args -m -b $onemeg -f $dumptape  -L 
$session_label $restore_dir"
     echo "xfsrestore $opts" | _dir_filter
-    $XFSRESTORE_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 #
@@ -1151,7 +1151,7 @@ _do_restore_file()
     echo "Restoring from file..."
     opts="$_restore_debug$restore_args -f $dump_file  -L $session_label 
$restore_dir"
     echo "xfsrestore $opts" | _dir_filter
-    $XFSRESTORE_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 #
@@ -1166,7 +1166,7 @@ _do_restore_file_cum()
     echo "Restoring cumumlative from file..."
     opts="$_restore_debug$restore_args -f $dump_file -r $restore_dir"
     echo "xfsrestore $opts" | _dir_filter
-    $XFSRESTORE_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 _do_restore_toc()
@@ -1177,7 +1177,7 @@ _do_restore_toc()
     opts="$_restore_debug$restore_args -f $dump_file -t"
     echo "xfsrestore $opts" | _dir_filter
     cd $SCRATCH_MNT # for IRIX which needs xfs cwd
-    $XFSRESTORE_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter_main |\
+    $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | 
_dump_filter_main |\
     _check_quota_file |\
     _check_quota_entries |\
     $AWK_PROG 'NF != 1 { print; next }
@@ -1208,7 +1208,7 @@ _do_restore_multi_file()
     echo "Restoring from file..."
     opts="$_restore_debug$restore_args $multi_args -L $session_label 
$restore_dir"
     echo "xfsrestore $opts" | _dir_filter
-    $XFSRESTORE_PROG $opts 2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSRESTORE_PROG $opts 2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
 }
 
 #
@@ -1228,7 +1228,7 @@ _do_dump_restore()
     restore_opts="$_restore_debug$restore_args - $restore_dir"
     dump_opts="$_dump_debug$dump_args -s $dump_sdir - $SCRATCH_MNT"
     echo "xfsdump $dump_opts | xfsrestore $restore_opts" | _dir_filter
-    $XFSDUMP_PROG $dump_opts 2>$tmp.dump.mlog | $XFSRESTORE_PROG $restore_opts 
2>&1 | tee -a $here/$seq.full | _dump_filter
+    $XFSDUMP_PROG $dump_opts 2>$tmp.dump.mlog | $XFSRESTORE_PROG $restore_opts 
2>&1 | tee -a $RESULT_DIR/$seq.full | _dump_filter
     _dump_filter <$tmp.dump.mlog
 }
 
@@ -1244,8 +1244,8 @@ _ls_compare_sub()
     # verify we got back what we dumped
     #
     echo "Comparing listing of dump directory with restore directory"
-    ls -nR $dump_dir | tee -a $here/$seq.full | _ls_filter >$tmp.dump_dir
-    ls -nR $restore_dir/$dump_sdir | tee -a $here/$seq.full | _ls_filter \
+    ls -nR $dump_dir | tee -a $RESULT_DIR/$seq.full | _ls_filter >$tmp.dump_dir
+    ls -nR $restore_dir/$dump_sdir | tee -a $RESULT_DIR/$seq.full | _ls_filter 
\
     | sed -e "s#$restore_sdir\/##" >$tmp.restore_dir
 
     diff -bcs $tmp.dump_dir $tmp.restore_dir | sed -e "s#$tmp#TMP#g"
@@ -1267,8 +1267,8 @@ _ls_nodate_compare_sub()
     # verify we got back what we dumped
     #
     echo "Comparing listing of dump directory with restore directory"
-    ls -nR $dump_dir | tee -a $here/$seq.full | _ls_filter | _ls_nodate_filter 
>$tmp.dump_dir
-    ls -nR $restore_dir/$dump_sdir | tee -a $here/$seq.full | _ls_filter \
+    ls -nR $dump_dir | tee -a $RESULT_DIR/$seq.full | _ls_filter | 
_ls_nodate_filter >$tmp.dump_dir
+    ls -nR $restore_dir/$dump_sdir | tee -a $RESULT_DIR/$seq.full | _ls_filter 
\
     | _ls_nodate_filter | sed -e "s#$restore_sdir\/##" >$tmp.restore_dir
 
     diff -bcs $tmp.dump_dir $tmp.restore_dir | sed -e "s#$tmp#TMP#g"
@@ -1366,7 +1366,7 @@ _diff_compare()
 #
 _dump_inventory()
 {
-    $XFSDUMP_PROG $_dump_debug -I | tee -a $here/$seq.full | _dump_filter_main
+    $XFSDUMP_PROG $_dump_debug -I | tee -a $RESULT_DIR/$seq.full | 
_dump_filter_main
 }
 
 #
@@ -1376,9 +1376,9 @@ _dump_inventory()
 _do_invutil()
 {
     host=`hostname`
-    echo "xfsinvutil $_invutil_debug -M $host:$SCRATCH_MNT \"$middate\" $*" 
>$here/$seq.full
+    echo "xfsinvutil $_invutil_debug -M $host:$SCRATCH_MNT \"$middate\" $*" 
>$RESULT_DIR/$seq.full
     $XFSINVUTIL_PROG $_invutil_debug $* -M $host:$SCRATCH_MNT "$middate" \
-    | tee -a $here/$seq.full | _invutil_filter
+    | tee -a $RESULT_DIR/$seq.full | _invutil_filter
 }
 
 #
@@ -1398,7 +1398,7 @@ _check_quota()
     $here/src/feature -P $SCRATCH_DEV && pquota=1
 
     $AWK_PROG -v uquota=$uquota -v gquota=$gquota -v pquota=$pquota \
-             -v full=$here/$seq.full -v usermsg="$usermsg" \
+             -v full=$RESULT_DIR/$seq.full -v usermsg="$usermsg" \
              -v groupmsg="$groupmsg" -v projectmsg="$projectmsg" '
        $0 ~ projectmsg {
                        print "Found project quota:", $0 >>full
diff --git a/common.filestreams b/common.filestreams
index 08eaf90..b3aee27 100644
--- a/common.filestreams
+++ b/common.filestreams
@@ -116,7 +116,7 @@ _check_for_dupes()
                 for this_num_two in $num_str_two; do
                         if [ "$this_num_one" == "$this_num_two" ]; then
                                echo "duplicate AG $this_num_one found" \
-                                       >> $here/$seq.full
+                                       >> $RESULT_DIR/$seq.full
                                return 1
                        fi
                 done
@@ -189,7 +189,7 @@ _test_streams() {
        stream_index=1
        while [ $stream_index -le $stream_count ]; do
                this_stream_ags=`_get_stream_ags stream${stream_index}-dir`
-               echo "stream $stream_index AGs: $this_stream_ags" >> 
$here/$seq.full
+               echo "stream $stream_index AGs: $this_stream_ags" >> 
$RESULT_DIR/$seq.full
                _check_for_dupes "$ags_seen" "$this_stream_ags"
                if [ $? -ne 0 ]; then
                        # this stream is not in seperate AGs to previous streams
diff --git a/common.log b/common.log
index 3958c48..e0e2bc6 100644
--- a/common.log
+++ b/common.log
@@ -20,7 +20,7 @@
 # Created by dxm@xxxxxxx & tes@xxxxxxx
 #
 
-fulldir=$seq.fulldir
+fulldir=$RESULT_DIR/$seq.fulldir
 rm -rf $fulldir
 
 _cleanup_logfiles()
@@ -33,16 +33,16 @@ _cleanup_logfiles()
 
 _full()
 {
-    echo ""            >>$seq.full      
-    echo "*** $* ***"  >>$seq.full
-    echo ""            >>$seq.full
+    echo ""            >>$RESULT_DIR/$seq.full      
+    echo "*** $* ***"  >>$RESULT_DIR/$seq.full
+    echo ""            >>$RESULT_DIR/$seq.full
 }
 
 _echofull()
 {
-    echo ""            | tee -a $seq.full      
-    echo "*** $* ***"  | tee -a $seq.full
-    echo ""            | tee -a $seq.full
+    echo ""            | tee -a $RESULT_DIR/$seq.full      
+    echo "*** $* ***"  | tee -a $RESULT_DIR/$seq.full
+    echo ""            | tee -a $RESULT_DIR/$seq.full
 }
 
 # Handle the operations which get split over Log Record
@@ -212,13 +212,13 @@ _filter_logprint()
 _check_log()
 {
     _full "clean_log : xfs_logprint"
-    _scratch_xfs_logprint -t | tee -a $seq.full \
+    _scratch_xfs_logprint -t | tee -a $RESULT_DIR/$seq.full \
         | head | grep -q "<CLEAN>" || _fail "DIRTY LOG"
 }
 
 _print_logstate()
 {
-    _scratch_xfs_logprint -t | tee -a $seq.full >$tmp.logprint
+    _scratch_xfs_logprint -t | tee -a $RESULT_DIR/$seq.full >$tmp.logprint
     if grep -q "<DIRTY>" $tmp.logprint; then
        echo "dirty log"
     fi
@@ -288,7 +288,7 @@ _mkfs_log()
     # mkfs options to append to log size otion can be specified ($*)
     export MKFS_OPTIONS="-l size=2000b -l lazy-count=1 $*"
     _full "mkfs"
-    _scratch_mkfs_xfs >>$seq.full 2>&1
+    _scratch_mkfs_xfs >>$RESULT_DIR/$seq.full 2>&1
     if [ $? -ne 0 ] ; then 
        _echofull "Cannot mkfs for this test using option specified: 
$MKFS_OPTIONS"
        return 1
@@ -305,7 +305,7 @@ _create_log()
 {
     # mount the FS
     _full "mount"
-    _scratch_mount >>$seq.full 2>&1
+    _scratch_mount >>$RESULT_DIR/$seq.full 2>&1
     if [ $? -ne 0 ] ; then 
        _echofull "mount failed: $MOUNT_OPTIONS"
        return 1
@@ -318,7 +318,7 @@ _create_log()
        
     # unmount the FS
     _full "umount"
-    umount $SCRATCH_DEV >>$seq.full 2>&1
+    umount $SCRATCH_DEV >>$RESULT_DIR/$seq.full 2>&1
     if [ $? -ne 0 ] ; then 
        _echofull "umount failed"
        return 1
@@ -334,7 +334,7 @@ _create_log_sync()
 {
     # mount the FS
     _full " mount"
-    _scratch_mount >>$seq.full 2>&1
+    _scratch_mount >>$RESULT_DIR/$seq.full 2>&1
     if [ $? -ne 0 ] ; then 
        _echofull "mount failed: $MOUNT_OPTIONS"
        return 1
@@ -349,7 +349,7 @@ _create_log_sync()
 
     # unmount the FS
     _full "umount"
-    umount $SCRATCH_DEV >>$seq.full 2>&1
+    umount $SCRATCH_DEV >>$RESULT_DIR/$seq.full 2>&1
     if [ $? -ne 0 ] ; then 
        _echofull "umount failed"
        return 1
@@ -448,21 +448,21 @@ _require_v2log()
 {
     # test out mkfs to see if it supports "-l version=2"
     export MKFS_OPTIONS="-l version=2"
-    if ! _scratch_mkfs_xfs >>$seq.full 2>&1; then
+    if ! _scratch_mkfs_xfs >>$RESULT_DIR/$seq.full 2>&1; then
         _notrun "mkfs does not support v2 logs"
     fi
 
     # test out mount to see if it mounts a v2 log fs
     export MOUNT_OPTIONS="-o logbsize=32k"
-    if ! _scratch_mount >>$seq.full 2>&1; then
+    if ! _scratch_mount >>$RESULT_DIR/$seq.full 2>&1; then
         _notrun "mount/kernel does not support v2 logs"
     fi
 
     # check after unmount to see if it is clean
     # i.e. it is not a 6.5.25 buggy version checking kernel
     touch $SCRATCH_MNT/file
-    umount $SCRATCH_DEV >>$seq.full 2>&1
-    if _scratch_xfs_logprint -t | tee -a $seq.full \
+    umount $SCRATCH_DEV >>$RESULT_DIR/$seq.full 2>&1
+    if _scratch_xfs_logprint -t | tee -a $RESULT_DIR/$seq.full \
         | head | grep -q "<DIRTY>"; then
         _notrun "kernel does not support v2 logs"
     fi
diff --git a/common.quota b/common.quota
index 2fa784b..ff80382 100644
--- a/common.quota
+++ b/common.quota
@@ -96,8 +96,8 @@ _file_as_id()
 
     parent=`dirname $1`
     if [ $3 = p ]; then
-       echo PARENT: xfs_io -r -c "chproj $2" -c "chattr +P" $parent >>$seq.full
-       $XFS_IO_PROG -r -c "chproj $2" -c "chattr +P" $parent >>$seq.full 2>&1
+       echo PARENT: xfs_io -r -c "chproj $2" -c "chattr +P" $parent 
>>$RESULT_DIR/$seq.full
+       $XFS_IO_PROG -r -c "chproj $2" -c "chattr +P" $parent 
>>$RESULT_DIR/$seq.full 2>&1
        magik='$>'      # (irrelevent, above set projid-inherit-on-parent)
     elif [ $3 = u ]; then
        magik='$>'      # perlspeak for effective uid
@@ -107,7 +107,7 @@ _file_as_id()
        _notrun "broken type in call to _file_as_id in test $seq"
     fi
 
-    perl <<EOF >>$seq.full 2>&1
+    perl <<EOF >>$RESULT_DIR/$seq.full 2>&1
        \$| = 1;
        $magik = $2;
        if ($5 == 0) {
@@ -119,11 +119,11 @@ _file_as_id()
        }
 EOF
 # for debugging the above euid change, try... [need write in cwd]
-#      exec "dd if=/dev/zero of=$1 bs=$4 count=$5 >>$seq.full 2>&1";
+#      exec "dd if=/dev/zero of=$1 bs=$4 count=$5 >>$RESULT_DIR/$seq.full 
2>&1";
 
     if [ $3 = p ]; then
-       echo PARENT: xfs_io -r -c "chproj 0" -c "chattr -P" $parent >>$seq.full
-       $XFS_IO_PROG -r -c "chproj 0" -c "chattr -P" $parent >>$seq.full 2>&1
+       echo PARENT: xfs_io -r -c "chproj 0" -c "chattr -P" $parent 
>>$RESULT_DIR/$seq.full
+       $XFS_IO_PROG -r -c "chproj 0" -c "chattr -P" $parent 
>>$RESULT_DIR/$seq.full 2>&1
     fi
 }
 
@@ -198,8 +198,8 @@ _qsetup()
        _notrun "No quota support at mount time"
     fi
 
-    echo "Using output from '" `ls -l $seq.out` "'" >>$seq.full
-    echo "and using type=$type id=$id" >>$seq.full
+    echo "Using output from '" `ls -l $seq.out` "'" >>$RESULT_DIR/$seq.full
+    echo "and using type=$type id=$id" >>$RESULT_DIR/$seq.full
 }
 
 #
@@ -229,7 +229,7 @@ _qmount_option()
 
        # Ensure we have the given quota option - duplicates are fine
        export MOUNT_OPTIONS="$MOUNT_OPTIONS -o $1"
-       echo "MOUNT_OPTIONS = $MOUNT_OPTIONS" >>$seq.full
+       echo "MOUNT_OPTIONS = $MOUNT_OPTIONS" >>$RESULT_DIR/$seq.full
 }
 
 _check_quota_usage()
diff --git a/common.rc b/common.rc
index 7d5a66d..b53734b 100644
--- a/common.rc
+++ b/common.rc
@@ -357,9 +357,9 @@ _scratch_mkfs_xfs()
 
     if [ $mkfs_status -ne 0 -a ! -z "$extra_mkfs_options" ]; then
         echo "** mkfs failed with extra mkfs options added to 
\"$MKFS_OPTIONS\" by test $seq **" \
-            >>$here/$seq.full
+            >>$RESULT_DIR/$seq.full
         echo "** attempting to mkfs using only test $seq options: 
$extra_mkfs_options **" \
-            >>$here/$seq.full
+            >>$RESULT_DIR/$seq.full
         # running mkfs again. overwrite previous mkfs output files
         $MKFS_XFS_PROG $SCRATCH_OPTIONS $extra_mkfs_options $SCRATCH_DEV \
             2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
@@ -812,9 +812,9 @@ _do()
        status=1; exit
     fi
 
-    (eval "echo '---' \"$_cmd\"") >>$here/$seq.full
+    (eval "echo '---' \"$_cmd\"") >>$RESULT_DIR/$seq.full
     (eval "$_cmd") >$tmp._out 2>&1; ret=$?
-    cat $tmp._out | _fix_malloc >>$here/$seq.full
+    cat $tmp._out | _fix_malloc >>$RESULT_DIR/$seq.full
     if [ $# -eq 2 ]; then
        if [ $ret -eq 0 ]; then
            echo "done"
@@ -827,7 +827,7 @@ _do()
            -o \( $# -eq 2 -a "$_do_die_on_error" = "message_only" \) ]
     then
        [ $# -ne 2 ] && echo
-       eval "echo \"$_cmd\" failed \(returned $ret\): see $seq.full"
+       eval "echo \"$_cmd\" failed \(returned $ret\): see 
$RESULT_DIR/$seq.full"
        status=1; exit
     fi
 
@@ -838,7 +838,7 @@ _do()
 #
 _notrun()
 {
-    echo "$*" >$seq.notrun
+    echo "$*" > $RESULT_DIR/$seq.notrun
     echo "$seq not run: $*"
     status=0
     exit
@@ -848,8 +848,8 @@ _notrun()
 #
 _fail()
 {
-    echo "$*" | tee -a $here/$seq.full
-    echo "(see $seq.full for details)"
+    echo "$*" | tee -a $RESULT_DIR/$seq.full
+    echo "(see $RESULT_DIR/$seq.full for details)"
     status=1
     exit 1
 }
@@ -1306,12 +1306,12 @@ _check_generic_filesystem()
     fsck -t $FSTYP $FSCK_OPTIONS $device >$tmp.fsck 2>&1
     if [ $? -ne 0 ]
     then
-        echo "_check_generic_filesystem: filesystem on $device is inconsistent 
(see $seq.full)"
+        echo "_check_generic_filesystem: filesystem on $device is inconsistent 
(see $RESULT_DIR/$seq.full)"
 
-        echo "_check_generic filesystem: filesystem on $device is 
inconsistent" >>$here/$seq.full
-        echo "*** fsck.$FSTYP output ***"                     >>$here/$seq.full
-        cat $tmp.fsck                                         >>$here/$seq.full
-        echo "*** end fsck.$FSTYP output"                     >>$here/$seq.full
+        echo "_check_generic filesystem: filesystem on $device is 
inconsistent" >>$RESULT_DIR/$seq.full
+        echo "*** fsck.$FSTYP output ***"      >>$RESULT_DIR/$seq.full
+        cat $tmp.fsck                          >>$RESULT_DIR/$seq.full
+        echo "*** end fsck.$FSTYP output"      >>$RESULT_DIR/$seq.full
 
         ok=0
     fi
@@ -1319,9 +1319,9 @@ _check_generic_filesystem()
 
     if [ $ok -eq 0 ]
     then
-        echo "*** mount output ***"                             
>>$here/$seq.full
-        _mount                                                  
>>$here/$seq.full
-        echo "*** end mount output"                             
>>$here/$seq.full
+        echo "*** mount output ***"            >>$RESULT_DIR/$seq.full
+        _mount                                 >>$RESULT_DIR/$seq.full
+        echo "*** end mount output"            >>$RESULT_DIR/$seq.full
     elif [ "$type" = "$FSTYP" ]
     then
        # was mounted ...
@@ -1377,12 +1377,12 @@ _check_xfs_filesystem()
                 | tee $tmp.logprint | grep -q "<CLEAN>"
     if [ $? -ne 0 -a "$HOSTOS" = "Linux" ]
     then
-        echo "_check_xfs_filesystem: filesystem on $device has dirty log (see 
$seq.full)"
+        echo "_check_xfs_filesystem: filesystem on $device has dirty log (see 
$RESULT_DIR/$seq.full)"
 
-        echo "_check_xfs_filesystem: filesystem on $device has dirty log"   
>>$here/$seq.full
-        echo "*** xfs_logprint -t output ***"                   
>>$here/$seq.full
-        cat $tmp.logprint                                       
>>$here/$seq.full
-        echo "*** end xfs_logprint output"                      
>>$here/$seq.full
+        echo "_check_xfs_filesystem: filesystem on $device has dirty log"   
>>$RESULT_DIR/$seq.full
+        echo "*** xfs_logprint -t output ***"  >>$RESULT_DIR/$seq.full
+        cat $tmp.logprint                      >>$RESULT_DIR/$seq.full
+        echo "*** end xfs_logprint output"     >>$RESULT_DIR/$seq.full
 
         ok=0
     fi
@@ -1391,12 +1391,12 @@ _check_xfs_filesystem()
         _fix_malloc >$tmp.fs_check
     if [ -s $tmp.fs_check ]
     then
-        echo "_check_xfs_filesystem: filesystem on $device is inconsistent (c) 
(see $seq.full)"
+        echo "_check_xfs_filesystem: filesystem on $device is inconsistent (c) 
(see $RESULT_DIR/$seq.full)"
 
-        echo "_check_xfs_filesystem: filesystem on $device is inconsistent" 
>>$here/$seq.full
-        echo "*** xfs_check output ***"                         
>>$here/$seq.full
-        cat $tmp.fs_check                                       
>>$here/$seq.full
-        echo "*** end xfs_check output"                         
>>$here/$seq.full
+        echo "_check_xfs_filesystem: filesystem on $device is inconsistent" 
>>$RESULT_DIR/$seq.full
+        echo "*** xfs_check output ***"                >>$RESULT_DIR/$seq.full
+        cat $tmp.fs_check                      >>$RESULT_DIR/$seq.full
+        echo "*** end xfs_check output"                >>$RESULT_DIR/$seq.full
 
         ok=0
     fi
@@ -1404,12 +1404,12 @@ _check_xfs_filesystem()
     $XFS_REPAIR_PROG -n $extra_log_options $extra_rt_options $device 
>$tmp.repair 2>&1
     if [ $? -ne 0 ]
     then
-        echo "_check_xfs_filesystem: filesystem on $device is inconsistent (r) 
(see $seq.full)"
+        echo "_check_xfs_filesystem: filesystem on $device is inconsistent (r) 
(see $RESULT_DIR/$seq.full)"
 
-        echo "_check_xfs_filesystem: filesystem on $device is inconsistent" 
>>$here/$seq.full
-        echo "*** xfs_repair -n output ***"                     
>>$here/$seq.full
-        cat $tmp.repair | _fix_malloc                           
>>$here/$seq.full
-        echo "*** end xfs_repair output"                        
>>$here/$seq.full
+        echo "_check_xfs_filesystem: filesystem on $device is inconsistent" 
>>$RESULT_DIR/$seq.full
+        echo "*** xfs_repair -n output ***"    >>$RESULT_DIR/$seq.full
+        cat $tmp.repair | _fix_malloc          >>$RESULT_DIR/$seq.full
+        echo "*** end xfs_repair output"       >>$RESULT_DIR/$seq.full
 
         ok=0
     fi
@@ -1417,9 +1417,9 @@ _check_xfs_filesystem()
 
     if [ $ok -eq 0 ]
     then
-        echo "*** mount output ***"                             
>>$here/$seq.full
-        _mount                                                  
>>$here/$seq.full
-        echo "*** end mount output"                             
>>$here/$seq.full
+        echo "*** mount output ***"            >>$RESULT_DIR/$seq.full
+        _mount                                 >>$RESULT_DIR/$seq.full
+        echo "*** end mount output"            >>$RESULT_DIR/$seq.full
     elif [ "$type" = "xfs" ]
     then
        _mount_or_remount_rw "$extra_mount_options" $device $mountpoint
@@ -1467,12 +1467,12 @@ _check_udf_filesystem()
         OPT_ARG="-lastvalidblock $LAST_BLOCK"
     fi
 
-    rm -f $seq.checkfs
+    rm -f $RESULT_DIR/$seq.checkfs
     sleep 1 # Due to a problem with time stamps in udf_test
-    $here/src/udf_test $OPT_ARG $device | tee $here/$seq.checkfs | egrep 
"Error|Warning" | \
+    $here/src/udf_test $OPT_ARG $device | tee $RESULT_DIR/$seq.checkfs | egrep 
"Error|Warning" | \
        _udf_test_known_error_filter | \
        egrep -iv "Error count:.*[0-9]+.*total occurrences:.*[0-9]+|Warning 
count:.*[0-9]+.*total occurrences:.*[0-9]+" | \
-       sed "s/^.*$/Warning UDF Verifier reported errors see $seq.checkfs./g"
+       sed "s/^.*$/Warning UDF Verifier reported errors see 
$RESULT_DIR/$seq.checkfs./g"
 
 }
 
@@ -1513,12 +1513,12 @@ _check_btrfs_filesystem()
     btrfsck $device >$tmp.fsck 2>&1
     if [ $? -ne 0 ]
     then
-        echo "_check_btrfs_filesystem: filesystem on $device is inconsistent 
(see $seq.full)"
+        echo "_check_btrfs_filesystem: filesystem on $device is inconsistent 
(see $RESULT_DIR/$seq.full)"
 
-        echo "_check_btrfs_filesystem: filesystem on $device is inconsistent" 
>>$here/$seq.full
-        echo "*** fsck.$FSTYP output ***"                     >>$here/$seq.full
-        cat $tmp.fsck                                         >>$here/$seq.full
-        echo "*** end fsck.$FSTYP output"                     >>$here/$seq.full
+        echo "_check_btrfs_filesystem: filesystem on $device is inconsistent" 
>>$RESULT_DIR/$seq.full
+        echo "*** fsck.$FSTYP output ***"      >>$RESULT_DIR/$seq.full
+        cat $tmp.fsck                          >>$RESULT_DIR/$seq.full
+        echo "*** end fsck.$FSTYP output"      >>$RESULT_DIR/$seq.full
 
         ok=0
     fi
@@ -1526,9 +1526,9 @@ _check_btrfs_filesystem()
 
     if [ $ok -eq 0 ]
     then
-        echo "*** mount output ***"                             
>>$here/$seq.full
-        _mount                                                  
>>$here/$seq.full
-        echo "*** end mount output"                             
>>$here/$seq.full
+        echo "*** mount output ***"            >>$RESULT_DIR/$seq.full
+        _mount                                 >>$RESULT_DIR/$seq.full
+        echo "*** end mount output"            >>$RESULT_DIR/$seq.full
     elif [ "$type" = "$FSTYP" ]
     then
        # was mounted ...
diff --git a/common.scsi_debug b/common.scsi_debug
index a085a67..f05c8db 100644
--- a/common.scsi_debug
+++ b/common.scsi_debug
@@ -47,7 +47,7 @@ _get_scsi_debug_dev()
                let phys_exp=phys_exp+1
        done
        opts="sector_size=$logical physblk_exp=$phys_exp 
lowest_aligned=$unaligned dev_size_mb=$size"
-       echo "scsi_debug options $opts" >> $seq.full
+       echo "scsi_debug options $opts" >> $RESULT_DIR/$seq.full
        modprobe scsi_debug $opts
        [ $? -eq 0 ] || _fail "scsi_debug modprobe failed"
        sleep 1
-- 
1.7.10

<Prev in Thread] Current Thread [Next in Thread>