Bug reference:
http://thread.gmane.org/gmane.comp.file-systems.ext4/20682
---
243 | 145 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
243.out | 25 +++++++++++
group | 1 +
3 files changed, 171 insertions(+), 0 deletions(-)
create mode 100644 243
create mode 100644 243.out
diff --git a/243 b/243
new file mode 100644
index 0000000..8102f24
--- /dev/null
+++ b/243
@@ -0,0 +1,145 @@
+#! /bin/bash
+# FS QA Test No. 243
+#
+# Test to ensure that the EOFBLOCK_FL gets set/unset correctly.
+#
+# As found by Theodore Ts'o:
+# If a 128K file is falloc'ed using the KEEP_SIZE flag, and then
+# write exactly 128K, the EOFBLOCK_FL doesn't get cleared correctly.
+# This forces e2fsck to complain about that inode.
+#
+# creator
+owner=alal@xxxxxxxxxx
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# Test specific macros.
+BIT_NOT_SET=0 # inode flag - 0x40000 bit is set.
+BIT_SET=1 # inode flag - 0x400000 bit is not set.
+
+# Generic test cleanup function.
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# Checks the state of the sample file in the filesystem and returns whether
+# the inode flag 0x400000 is set or not.
+_check_file_state()
+{
+ bit_set=1
+
+ # Check whether EOFBLOCK_FL is set.
+ if [ "${FSTYP}" == "ext4" ]; then
+ # Unmount the ${TEST_DEV}
+ umount ${TEST_DEV}
+
+ # Run debugfs to gather file_parameters - specifically iflags.
+ file_params=`debugfs ${TEST_DEV} -R "stat ${1}" 2>&1 | grep -e Flags:`
+ iflags=${file_params#*Flags: }
+
+ # Ensure that the iflags value was parsed correctly.
+ if [ -z ${iflags} ]; then
+ echo "iFlags value was not parsed successfully."
+ status=1
+ exit ${status}
+ fi
+
+ if ((${iflags} & 0x400000)); then
+ echo "EOFBLOCK_FL bit is set."
+ bit_set=1
+ else
+ echo "EOFBLOCK_FL bit is not set."
+ bit_set=0
+ fi
+
+ # Check current bit state to expected value.
+ if [ ${bit_set} -ne ${2} ]; then
+ echo "Error: Current bit state incorrect."
+ exit ${status}
+ fi
+
+ # Mount the ${TEST_DEV}
+ mount ${TEST_DEV} -t ${FSTYP} ${TEST_DIR}
+ else
+ # Run fsck on the fs. fsck -t ${FSTYP} -fn ${TEST_DEV}.
+ _check_test_fs
+ fi
+
+ # Remove test file
+ rm -f ${TEST_DIR}/${1}
+}
+
+# Get standard environment, filters and checks.
+. ./common.rc
+. ./common.filter
+
+# Prerequisites for the test run.
+_supported_fs generic
+_supported_os Linux
+_require_xfs_io_falloc
+
+# Real QA test starts here.
+rm -f $seq.full
+
+# Begin test cases.
+
+# Using FALLOC_FL_KEEP_SIZE
+# Test 1: Fallocate 40960 bytes and write 4096 bytes (buffered io).
+echo "Test 1: Fallocate 40960 bytes and write 4096 bytes (buffered io)."
+${XFS_IO_PROG} -F -f \
+ -c 'falloc -k 0 40960' \
+ -c 'pwrite 0 4096' \
+ ${TEST_DIR}/test_1 | _filter_xfs_io_unique
+_check_file_state test_1 ${BIT_SET}
+
+# Test 2: Fallocate 40960 bytes and write 4096 bytes (direct io).
+echo "Test 2: Fallocate 40960 bytes and write 4096 bytes (direct io)."
+${XFS_IO_PROG} -F -f -d \
+ -c 'falloc -k 0 40960' \
+ -c 'pwrite 0 4096' \
+ ${TEST_DIR}/test_2 | _filter_xfs_io_unique
+_check_file_state test_2 ${BIT_SET}
+
+# Test 3: Fallocate 40960 bytes and write 40960 bytes (buffered io).
+echo "Test 3: Fallocate 40960 bytes and write 40960 bytes (buffered io)."
+${XFS_IO_PROG} -F -f \
+ -c 'falloc -k 0 40960' \
+ -c 'pwrite 0 40960' \
+ ${TEST_DIR}/test_3 | _filter_xfs_io_unique
+_check_file_state test_3 ${BIT_NOT_SET}
+
+# Test 4: Fallocate 40960 bytes and write 40960 bytes (direct io).
+echo "Test 4: Fallocate 40960 bytes and write 40960 bytes (direct io)."
+${XFS_IO_PROG} -F -f -d \
+ -c 'falloc -k 0 40960' \
+ -c 'pwrite 0 40960' \
+ ${TEST_DIR}/test_4 | _filter_xfs_io_unique
+_check_file_state test_4 ${BIT_NOT_SET}
+
+# Test 5: Fallocate 128k, seek to 256k and write a 4k block (buffered io).
+echo "Test 5: Fallocate 128k, seek to 256k and write a 4k block (buffered io)."
+${XFS_IO_PROG} -F -f \
+ -c 'falloc -k 0 128k' \
+ -c 'pwrite 256k 4k' \
+ ${TEST_DIR}/test_5 | _filter_xfs_io_unique
+_check_file_state test_5 ${BIT_NOT_SET}
+
+# Test 6: Fallocate 128k, seek to 256k and write a 4k block (direct io).
+echo "Test 6: Fallocate 128k, seek to 256k and write a 4k block (direct io)."
+${XFS_IO_PROG} -F -f -d \
+ -c 'falloc -k 0 128k' \
+ -c 'pwrite 256k 4k' \
+ ${TEST_DIR}/test_6 | _filter_xfs_io_unique
+_check_file_state test_6 ${BIT_NOT_SET}
+
+
+status=0
+exit ${status}
diff --git a/243.out b/243.out
new file mode 100644
index 0000000..35583e8
--- /dev/null
+++ b/243.out
@@ -0,0 +1,25 @@
+QA output created by 243
+Test 1: Fallocate 40960 bytes and write 4096 bytes (buffered io).
+wrote 4096/4096 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+EOFBLOCK_FL bit is set.
+Test 2: Fallocate 40960 bytes and write 4096 bytes (direct io).
+wrote 4096/4096 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+EOFBLOCK_FL bit is set.
+Test 3: Fallocate 40960 bytes and write 40960 bytes (buffered io).
+wrote 40960/40960 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+EOFBLOCK_FL bit is set.
+Test 4: Fallocate 40960 bytes and write 40960 bytes (direct io).
+wrote 40960/40960 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+EOFBLOCK_FL bit is set.
+Test 5: Fallocate 128k, seek to 256k and write a 4k block (buffered io).
+wrote 4096/4096 bytes at offset 262144
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+EOFBLOCK_FL bit is not set.
+Test 6: Fallocate 128k, seek to 256k and write a 4k block (direct io).
+wrote 4096/4096 bytes at offset 262144
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+EOFBLOCK_FL bit is not set.
diff --git a/group b/group
index ff16bb3..e6dab13 100644
--- a/group
+++ b/group
@@ -356,3 +356,4 @@ deprecated
240 auto aio quick rw
241 auto
242 auto quick prealloc
+243 auto quick prealloc
--
1.7.1
|