xfs
[Top] [All Lists]

Re: Switching from (deprecated) IDE driver -> SATA (PATA support)

To: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Subject: Re: Switching from (deprecated) IDE driver -> SATA (PATA support)
From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Date: Sun, 25 Jan 2009 07:15:40 -0500 (EST)
Cc: linux-kernel@xxxxxxxxxxxxxxx, linux-ide@xxxxxxxxxxxxxxx, xfs@xxxxxxxxxxx
In-reply-to: <alpine.DEB.1.10.0901250705300.6888@xxxxxxxxxxxxxxxx>
References: <alpine.DEB.1.10.0901250553430.2441@xxxxxxxxxxxxxxxx> <20090125110742.4ba54c0b@xxxxxxxxxxxxxxxxxxx> <alpine.DEB.1.10.0901250705300.6888@xxxxxxxxxxxxxxxx>
User-agent: Alpine 1.10 (DEB 962 2008-03-14)


On Sun, 25 Jan 2009, Justin Piszcz wrote:



On Sun, 25 Jan 2009, Alan Cox wrote:

Easiest is to use labels. Old ide will keep hda,b,c,d constant
providing you have interfaces using the legacy IDE port mappings (0x1f0
and 0x170). Libata doesn't do that as pretty much every distribution had
already switched to volume labels, and the user space can do the job far
better than the kernel - especially as the newer devices with modern
interfaces don't have the old BIOS/DOS legacy ideas any more.

Mount by label also means you can flip back and forth between the
different drivers and kernel revisions.

Alan


That works well with ext* filesystems as one can set it anytime with e2label if I recall; however, how can one do this with XFS, is it possible without booting off a boot-cd etc?

Here is the filesystem information:
p254:~# xfs_info /dev/sdd2
meta-data=/dev/root              isize=256    agcount=16, agsize=1186676 blks
        =                       sectsz=512   attr=0
data     =                       bsize=4096   blocks=18986816, imaxpct=25
        =                       sunit=0      swidth=0 blks
naming =version 2 bsize=4096 log =internal bsize=4096 blocks=9270, version=1
        =                       sectsz=512   sunit=0 blks, lazy-count=0
realtime =none                   extsz=65536  blocks=0, rtextents=0

When I try to label it:
p254:~# xfs_admin -L "root" /dev/sdd2
xfs_admin: /dev/sdd2 contains a mounted filesystem

fatal error -- couldn't initialize XFS library

The label is currently not set:
p254:~# xfs_admin -l  /dev/sdd2
label = ""
p254:~#

I guess my next step is to try UUID?

Instead of giving the device explicitly, one may indicate the (ext2 or xfs) filesystem that is to be mounted by its UUID or volume label (cf. e2label(8) or xfs_admin(8)), writing LABEL=<label> or UUID=<uuid>, e.g., `LABEL=Boot' or `UUID=3e6be9de-8139-11d1-9106-a43f08d823a6'. This will make the system more robust: adding or removing a SCSI disk
      changes the disk device name but not the filesystem volume label.

p254:~# xfs_admin -U generate /dev/sdd2
xfs_admin: /dev/sdd2 contains a mounted filesystem

fatal error -- couldn't initialize XFS library
p254:~#

Hmm, am I out of luck?

Justin.


It comes with one :)
# xfs_admin -u  /dev/sdd2
UUID = 77ae4251-631f-4656-a365-c5723f5c5da8

Will try to use this to boot; however, I'd prefer the labels over the UUID, wish there was an easy way to set it.

Justin.

<Prev in Thread] Current Thread [Next in Thread>