Am Donnerstag, 31. August 2006 18:57 schrieben Sie:
> I am trying to create a 3.2TB partition on my Raid 5. Is there a
> document that could help?
>
> I have a 3ware 9500 controller and 8 *500GB sata drives configured into
> a single RAID 5 array.
>
I have a Raid with about 5TB and no problems creating an xfs filesystem on it.
The system is Novell SLES10 with a 2.6.16.21 kernel.
At first there was a problem with the raid. The firmware of the raid device
needed an upgrade. Bevore the upgrade I had a maximum of 2TB.
In dmesg (or /var/log/boot.msg on SLES10) you should see something like this
message if the device (sdc here) is handled correctly:
<5>sdc : very big device. try to use READ CAPACITY(16).
<5>SCSI device sdc: 10156243968 512-byte hdwr sectors (5199997 MB)
<5>sdc: Write Protect is off
<7>sdc: Mode Sense: cb 00 00 08
<5>SCSI device sdc: drive cache: write back
<5>sdc : very big device. try to use READ CAPACITY(16).
<5>SCSI device sdc: 10156243968 512-byte hdwr sectors (5199997 MB)
Bevore the firmware update there was an error when trying to read the capacity
via READ CAPACITY(16).
I created the partitiions using parted. fdisk did not work.
Have a nice day
Rainer
--
---------------------------------------------------------------------------
Rainer Krienke, Universitaet Koblenz, Rechenzentrum, Raum A022
Universitaetsstrasse 1, 56070 Koblenz, Tel: +49 261287 -1312, Fax: -1001312
Mail: krienke@xxxxxxxxxxxxxx, Web: http://www.uni-koblenz.de/~krienke
Get my public PGP key: http://www.uni-koblenz.de/~krienke/mypgp.html
---------------------------------------------------------------------------
pgpm9Fx43Q29d.pgp
Description: PGP signature
|