le. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. DMI not present. ACPI: Unable to locate RSDP Kernel command line: root=/dev/md1 ro video=vesafb vga=792 mem=262144K No local APIC present or hardware disabled Initializing CPU#0 Detected 400.914 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 799.53 BogoMIPS Memory: 255720k/262144k available (2158k kernel code, 6036k reserved, 642k data, 124k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx) mtrr: detected mtrr type: AMD K6 ACPI: Subsystem revision 20031002 PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=1 PCI: Using configuration type 1 ACPI: System description tables not found ACPI-0084: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND ACPI-0134: *** Error: acpi_load_tables: Could not load tables: AE_NOT_FOUND ACPI: Unable to load the System Description Tables PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0596] at 00:07.0 Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded SGI XFS with realtime, no debug enabled SGI XFS Quota Management subsystem vesafb: framebuffer at 0xe4000000, mapped to 0xd0850000, size 4608k vesafb: mode is 1024x768x24, linelength=3072, pages=13 vesafb: protected mode interface info at c000:49e3 vesafb: scrolling: redraw vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Real Time Clock Driver v1.10f RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation PCI: Found IRQ 5 for device 00:09.0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c596a (rev 06) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L120AVVA07-0, ATA DISK drive blk: queue c0409b80, I/O limit 4095Mb (mask 0xffffffff) hdc: IC35L120AVVA07-0, ATA DISK drive blk: queue c0409fd4, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=15017/255/63, UDMA(33) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=239340/16/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 > hda1: hdc: [PTBL] [15017/255/63] hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 > Guestimating sector 241253695 for superblock Guestimating sector 241253695 for superblock driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 9 for device 00:0c.0 PCI: Sharing IRQ 9 with 00:0a.0 sym.0.12.0: setting PCI_COMMAND_PARITY... sym.0.12.0: setting PCI_COMMAND_INVALIDATE. sym0: <860> rev 0x2 on pci bus 0 device 12 function 0 irq 9 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver sym0: using LOAD/STORE-based firmware. sym0: SCSI BUS has been reset. scsi0 : sym-2.1.17a blk: queue c137b474, I/O limit 4095Mb (mask 0xffffffff) Vendor: ARCHIVE Model: 4326XX 27871-XXX Rev: 0322 Type: Sequential-Access ANSI SCSI revision: 02 blk: queue c137b574, I/O limit 4095Mb (mask 0xffffffff) Vendor: YAMAHA Model: CRW4416S Rev: 1.0j Type: CD-ROM ANSI SCSI revision: 02 blk: queue c137b674, I/O limit 4095Mb (mask 0xffffffff) Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 blk: queue c137b774, I/O limit 4095Mb (mask 0xffffffff) st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16 Attached scsi tape st0 at scsi0, channel 0, id 2, lun 0 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 5, lun 0 sym0:3: FAST-10 SCSI 8.3 MB/s ST (120.0 ns, offset 8) sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sym0:5: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 8) sr1: scsi-1 drive md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 621.600 MB/sec 32regs : 407.600 MB/sec pII_mmx : 887.600 MB/sec p5_mmx : 853.600 MB/sec raid5: using function: pII_mmx (887.600 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. [events: 00002765] [events: 00000bb7] [events: 0000151e] [events: 00002765] [events: 00000bb7] [events: 0000151e] md: autorun ... md: considering hdc9 ... md: adding hdc9 ... md: adding hda9 ... md: created md3 md: bind md: bind md: running: md: hdc9's event counter: 0000151e md: hda9's event counter: 0000151e md: RAID level 1 does not need chunksize! Continuing anyway. md3: max total readahead window set to 124k md3: 1 data-disks, max readahead per data-disk: 124k raid1: device hdc9 operational as mirror 1 raid1: device hda9 operational as mirror 0 raid1: raid set md3 active with 2 out of 2 mirrors md: updating md3 RAID superblock on device md: hdc9 [events: 0000151f]<6>(write) hdc9's sb offset: 4184832 md: hda9 [events: 0000151f]<6>(write) hda9's sb offset: 4184832 md: considering hdc8 ... md: adding hdc8 ... md: adding hda8 ... md: created md2 md: bind md: bind md: running: md: hdc8's event counter: 00000bb7 md: hda8's event counter: 00000bb7 md: RAID level 1 does not need chunksize! Continuing anyway. md2: max total readahead window set to 124k md2: 1 data-disks, max readahead per data-disk: 124k raid1: device hdc8 operational as mirror 1 raid1: device hda8 operational as mirror 0 raid1: raid set md2 active with 2 out of 2 mirrors md: updating md2 RAID superblock on device md: hdc8 [events: 00000bb8]<6>(write) hdc8's sb offset: 4184832 md: hda8 [events: 00000bb8]<6>(write) hda8's sb offset: 4184832 md: considering hdc6 ... md: adding hdc6 ... md: adding hda6 ... md: created md1 md: bind md: bind md: running: md: hdc6's event counter: 00002765 md: hda6's event counter: 00002765 md: RAID level 1 does not need chunksize! Continuing anyway. md1: max total readahead window set to 124k md1: 1 data-disks, max readahead per data-disk: 124k raid1: device hdc6 operational as mirror 0 raid1: device hda6 operational as mirror 1 raid1: raid set md1 active with 2 out of 2 mirrors md: updating md1 RAID superblock on device md: hdc6 [events: 00002766]<6>(write) hdc6's sb offset: 2417664 md: hda6 [events: 00002766]<6>(write) hda6's sb offset: 2417664 md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM sh-2021: reiserfs_read_super: can not find reiserfs on md(9,1) Mount JFS Failure: -22 XFS mounting filesystem md(9,1) Ending clean XFS mount for filesystem: md(9,1) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 124k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 248968k swap-space (priority -1) Adding Swap: 248968k swap-space (priority -2) LVM version 1.0.7(28/03/2003) module loaded loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem md(9,2) Ending clean XFS mount for filesystem: md(9,2) XFS mounting filesystem md(9,3) Ending clean XFS mount for filesystem: md(9,3) reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide1(22,1)) ... for (ide1(22,1)) ide1(22,1):Using r5 hash to sort names NTFS driver v1.1.22 [Flags: R/O MODULE] MSDOS FS: IO charset utf8 XFS mounting filesystem lvm(58,16) Ending clean XFS mount for filesystem: lvm(58,16) XFS mounting filesystem lvm(58,10) Ending clean XFS mount for filesystem: lvm(58,10) reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device lvm(58,0)) ... for (lvm(58,0)) lvm(58,0):Using r5 hash to sort names XFS mounting filesystem lvm(58,1) Ending clean XFS mount for filesystem: lvm(58,1) XFS mounting filesystem lvm(58,4) Ending clean XFS mount for filesystem: lvm(58,4) XFS mounting filesystem lvm(58,3) Ending clean XFS mount for filesystem: lvm(58,3) XFS mounting filesystem lvm(58,8) Ending clean XFS mount for filesystem: lvm(58,8) XFS mounting filesystem lvm(58,12) Ending clean XFS mount for filesystem: lvm(58,12) XFS mounting filesystem lvm(58,13) Ending clean XFS mount for filesystem: lvm(58,13) XFS mounting filesystem lvm(58,17) Ending clean XFS mount for filesystem: lvm(58,17) XFS mounting filesystem lvm(58,18) Ending clean XFS mount for filesystem: lvm(58,18) XFS mounting filesystem ide1(22,5) Ending clean XFS mount for filesystem: ide1(22,5) reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,10)) ... for (ide0(3,10)) ide0(3,10):Using r5 hash to sort names reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,12)) ... for (ide0(3,12)) ide0(3,12):Using r5 hash to sort names reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,13)) ... for (ide0(3,13)) ide0(3,13):Using r5 hash to sort names XFS mounting filesystem lvm(58,14) Ending clean XFS mount for filesystem: lvm(58,14) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 204M agpgart: Detected Via MVP3 chipset agpgart: AGP aperture is 64M @ 0xe0000000 scsi1 : SCSI host adapter emulation for IDE ATAPI devices PCI: Found IRQ 9 for device 00:0a.0 PCI: Sharing IRQ 9 with 00:0c.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc000. Vers LK1.1.18-ac 00:10:5a:c3:04:06, IRQ 9 product code 5146 rev 00.9 date 11-07-98 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. Enabling bus-master transmits and whole-frame receives. 00:0a.0: scatter/gather enabled. h/w checksums enabled usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 uhci.c: USB UHCI at I/O 0xa400, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 uhci.c: detected 2 ports usb.c: kmalloc IF ceed6580, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI-alt Root Hub SerialNumber: a400 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface ceed6580 usb.c: kusbd: /sbin/hotplug add 1 uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6 uhci.c: a400: suspend_hc hub.c: port 1, portstatus 100, change 3, 12 Mb/s hub.c: port 1 connection change hub.c: port 1, portstatus 100, change 3, 12 Mb/s hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s uhci.c: root-hub INT complete: port1: 488 port2: 588 data: 6 hub.c: port 1, portstatus 100, change 2, 12 Mb/s hub.c: port 1 enable change, status 100 hub.c: port 2, portstatus 300, change 2, 1.5 Mb/s hub.c: port 2 enable change, status 300 ip_conntrack version 2.1 (2048 buckets, 16384 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team sym0:2: FAST-10 SCSI 5.0 MB/s ST (200.0 ns, offset 8) st0: Mode 0 options: buffer writes: 1, async writes: 1, read ahead: 1 st0: can bsr: 1, two FMs: 0, fast mteom: 0, auto lock: 1, st0: defs for wr: 0, no block limits: 0, partitions: 1, s2 log: 1 st0: sysv: 0 nowait: 0 st0: Default block size set to 0 bytes. st0: Compression default set to 1 st0: Mode 1 options: buffer writes: 1, async writes: 1, read ahead: 1 st0: can bsr: 1, two FMs: 0, fast mteom: 0, auto lock: 1, st0: defs for wr: 0, no block limits: 0, partitions: 1, s2 log: 1 st0: sysv: 0 nowait: 0 st0: Default block size set to 1024 bytes. st0: Compression default set to 1 st0: Mode 2 options: buffer writes: 1, async writes: 1, read ahead: 1 st0: can bsr: 1, two FMs: 0, fast mteom: 0, auto lock: 1, st0: defs for wr: 0, no block limits: 0, partitions: 1, s2 log: 1 st0: sysv: 0 nowait: 0 st0: Default block size set to 0 bytes. st0: Compression default set to 0 st0: Mode 3 options: buffer writes: 1, async writes: 1, read ahead: 1 st0: can bsr: 1, two FMs: 0, fast mteom: 0, auto lock: 1, st0: defs for wr: 0, no block limits: 0, partitions: 1, s2 log: 1 st0: sysv: 0 nowait: 0 st0: Default block size set to 1024 bytes. st0: Compression default set to 0 [drm] AGP 0.99 Aperture @ 0xe0000000 64MB [drm] Initialized r128 2.2.0 20010917 on minor 0