[Top] [All Lists]

Re: 2.4.20-18 Red Hat errata kernel with XFS 1.2.0

To: Seth Mos <knuffie@xxxxxxxxx>
Subject: Re: 2.4.20-18 Red Hat errata kernel with XFS 1.2.0
From: Jameel Akari <jakari@xxxxxxxxxxx>
Date: Mon, 9 Jun 2003 14:50:07 -0400 (EDT)
Cc: <linux-xfs@xxxxxxxxxxx>
In-reply-to: <20030609201720.J86243-100000@xxxxxxxxxxxxx>
Sender: linux-xfs-bounce@xxxxxxxxxxx
On Mon, 9 Jun 2003, Seth Mos wrote:

> http://iserv.nl/files/xfs/2.4.20-18/
> New cannon fodder has just arrived.

"There was supposed to be an Earth-shattering kaboom!"

Nope, it seems to work for me on a mostly normal RH8 box.  dmesg below.

I'll have to grab the srpm later and play with it.. unless you happened to
build the NTFS and UFS fs modules.  (I'm testing various backups and
restores on this box.. I should probably make sure xfsdump and friends are
up to date.)


sleep 4800;
make clean && make breakfast

She's a runner:
Linux version 2.4.20-18.7SGI_XFS_1.2.0 (root@xxxxxxxxxxxxxxxx) (gcc
version 2.96 20000731 (Red Hat Linux 7.3 2.96-1
13)) #1 Mon Jun 9 19:33:48 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000018000000 (usable)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
384MB LOWMEM available.
On node 0 totalpages: 98304
zone(0): 4096 pages.
zone(1): 94208 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux_2.4.20 ro
BOOT_FILE=/boot/vmlinuz-2.4.20-18.7SGI_XFS_1.2.0 root=LABEL=/
Initializing CPU#0
Detected 497.843 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 992.87 BogoMIPS
Memory: 381960k/393216k available (1578k kernel code, 8692k reserved,
1048k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xedb20, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:14.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
SGI XFS 1.2.0 with ACLs, quota, no debug enabled
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
PIIX4: IDE controller at PCI slot 00:14.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
hda: ST320424A, ATA DISK drive
blk: queue c03ecb40, I/O limit 4095Mb (mask 0xffffffff)
hdc: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2586/240/63,
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 190k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0d.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

blk: queue c1fab414, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: EXABYTE   Model: EXB-8505SMBANSH2  Rev: 07T0
  Type:   Sequential-Access                  ANSI SCSI revision: 02
blk: queue c1fab814, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: COMPAQ    Model: DLT8000           Rev: 0250
  Type:   Sequential-Access                  ANSI SCSI revision: 02
blk: queue c1faba14, I/O limit 4095Mb (mask 0xffffffff)
XFS mounting filesystem ide0(3,1)
Ending clean XFS mount for filesystem: ide0(3,1)
Freeing unused kernel memory: 120k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:42:51 Jun  9 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:14.2
usb-uhci.c: USB UHCI at I/O 0x1080, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Adding Swap: 393080k swap-space (priority 1)
XFS mounting filesystem ide0(3,8)
Ending clean XFS mount for filesystem: ide0(3,8)
XFS mounting filesystem ide0(3,5)
Ending clean XFS mount for filesystem: ide0(3,5)
XFS mounting filesystem ide0(3,6)
Ending clean XFS mount for filesystem: ide0(3,6)
st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0
Attached scsi tape st1 at scsi0, channel 0, id 6, lun 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@xxxxxxxxxxxxx> and others
PCI: Found IRQ 11 for device 00:0e.0
divert: allocating divert_blk for eth0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:52:F9:AD, IRQ 11.
  Board assembly 734938-003, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).

<Prev in Thread] Current Thread [Next in Thread>