Linux version 2.5.56 (root@tokyo) (gcc version 3.2.2 20030109 (Debian prerelease)) #4 Mon Jan 13 16:24:35 EST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002ffeb000 (usable) BIOS-e820: 000000002ffeb000 - 000000002ffef000 (ACPI data) BIOS-e820: 000000002ffef000 - 000000002ffff000 (reserved) BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 767MB LOWMEM available. On node 0 totalpages: 196587 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192491 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 ASUS ) @ 0x000f6650 ACPI: RSDT (v001 ASUS P4T 12336.12337) @ 0x2ffeb000 ACPI: FADT (v001 ASUS P4T 12336.12337) @ 0x2ffeb080 ACPI: BOOT (v001 ASUS P4T 12336.12337) @ 0x2ffeb040 ACPI: DSDT (v001 ASUS P4T 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=Linux ro root=343 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1807.635 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3571.71 BogoMIPS Memory: 774512k/786348k available (2206k kernel code, 11064k reserved, 520k data, 304k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available Machine check exception polling timer started. CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) device class 'cpu': registering device class cpu: adding driver system:cpu PCI: PCI BIOS revision 2.10 entry at 0xf0ea0, last bus=2 PCI: Using configuration type 1 device class cpu: adding device CPU 0 interfaces: adding device CPU 0 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030109 tbxface-0098 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................................... Table [DSDT] - 416 Objects with 43 Devices 131 Methods 23 Regions ACPI Namespace successfully loaded at root c0403afc evxfevnt-0073 [04] acpi_enable : Transition to ACPI mode successful evgpe-0262: *** Info: GPE Block0 defined as GPE0 to GPE15 evgpe-0262: *** Info: GPE Block1 defined as GPE16 to GPE31 Executing all Device _STA and_INI methods:.................................... uteval-0090: *** Error: No object was returned from [\_SB_.PCI0.PX40.UAR2._STA] (Node c17d5e28), AE_NOT_EXIST ....... 43 Devices found containing: 42 _STA, 0 _INI methods Completing Region/Field/Buffer/Package initialization:............................................................ Initialized 20/23 Regions 4/4 Fields 22/22 Buffers 14/14 Packages (416 nodes) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 31 exit congestion at 33 drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Enabling SEP on CPU 0 Total HugeTLB memory allocated, 0 aio_setup: sizeof(struct page) = 40 NTFS driver 2.1.0 [Flags: R/O]. SGI XFS for Linux 2.5.56 with no debug enabled ACPI: Power Button (FF) [PWRF] acpi_processor-2385 [06] acpi_processor_get_inf: Invalid PBLK length [5] ACPI: Processor [CPU0] (supports C1) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 [PCSPP] parport0: cpp_daisy: aa5500ff(18) parport0: assign_addrs: aa5500ff(18) parport0: Printer, EPSON Stylus C60 device class 'tty': registering pty: 256 Unix98 ptys configured lp0: using parport0 (polling). Real Time Clock Driver v1.11 i810_rng: RNG not detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Intel i850 chipset agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 128M @ 0xf0000000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 5T060H6, ATA DISK drive hdb: Maxtor 5T060H6, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TDK CDRW241040B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=119150/16/63, UDMA(33) hda: hda1 hdb: host protected area => 1 hdb: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=119150/16/63, UDMA(33) hdb: hdb1 hdb2 hdb3 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 PCI: Setting latency timer of device 00:1f.2 to 64 uhci-hcd 00:1f.2: Intel Corp. 82801BA/BAM USB (Hub uhci-hcd 00:1f.2: irq 9, io base 0000b400 uhci-hcd 00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected PCI: Setting latency timer of device 00:1f.4 to 64 uhci-hcd 00:1f.4: Intel Corp. 82801BA/BAM USB (Hub uhci-hcd 00:1f.4: irq 9, io base 0000b000 uhci-hcd 00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver device class 'input': registering register interface 'mouse' with class 'input' mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.0rc6 (Tue Dec 17 19:01:13 2002 UTC). request_module[snd-card-0]: not ready request_module[snd-card-1]: not ready request_module[snd-card-2]: not ready request_module[snd-card-3]: not ready request_module[snd-card-4]: not ready request_module[snd-card-5]: not ready request_module[snd-card-6]: not ready request_module[snd-card-7]: not ready PCI: Enabling device 02:09.0 (0004 -> 0005) ALSA device list: #0: Sound Blaster Audigy at 0xd400, irq 10 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. request_module[nls_iso8859-1]: not ready Unable to load NLS charset iso8859-1 XFS mounting filesystem ide0(3,67) hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 Ending clean XFS mount for filesystem: ide0(3,67) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 304k freed hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-00:1f.2-1 Adding 497972k swap on /dev/hdb1. Priority:-1 extents:1 ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Enabling device 02:07.0 (0000 -> 0001) eth0: Winbond 89C940 found at 0xd800, IRQ 11, 00:20:78:14:EB:C8. XFS mounting filesystem ide0(3,66) Ending clean XFS mount for filesystem: ide0(3,66) Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair. Filesystem "ide0(3,67)": corrupt dinode 171966634, (btree extents). Unmount and run xfs_repair.