On Tue, Sep 10, 2002 at 03:58:14PM +0200, thomas wrote:
> i've got a RAID1 running that seems to not umount itself properly. so
> when i try to mount the system after a reboot i see:
> now i don't have /dev/md0 in fstab just to be sure that it
> doesn't try to mount itself before the raid array is
> started. but it doesn't matter. whatever i try the only thing
> that helps is xfs_repair -L /dev/md0, after that it mounts
> without any problems.
Is this / on raid1?
If so, I also see this... I put some stack dump stuff in to verify
that /dev/md0 get opened *twice* as / is mounted, once I assume for
the auto-raid stuff (or something?) and then again to mount /
The raid1 code won't switch to RO in there is more than one reference
and thus it's never able to be mounted cleanly.
Sorry this doesn't provide a solution, I was tracking this down under
time pressure and had to fix the problem using another means.
--cw
|