Hi,
I'm also having the exactly same problem.
Tested with 2.4.19-xfs(checked out from SGI's CVS on Aug 10) on Redhat 7.2.
Kernel and userland tools are compiled with gcc 2.91.66
The following is the result of some tests:
scsidisks -> xfs: OK
scsidisks -> raid5 -> xfs: OK
scsidisks -> lvm -> xfs: OK
scsidisks -> raid0 -> lvm -> xfs: OK
scsidisks -> raid1 -> lvm -> xfs: OK
scsidisks -> raid5 -> lvm -> xfs: kernel BUG at filemap.c:843!
This problem is always reproducible with the following shell script:
#!/bin/sh
mkraid /dev/md0
vgcreate VolumeGroup /dev/md0
lvcreate -L1G -nTestVolume VolumeGroup
mkfs.xfs -f -d size=32m /dev/VolumeGroup/TestVolume
mount -t xfs /dev/VolumeGroup/TestVolume
/mnt -onoatime,nodiratime,usrquota,grpquota
Whenever I run the above script, mount command always generates kernel oops.
But, if I insert some delay as of the following, then mount goes well:
#!/bin/sh
mkraid /dev/md0
vgcreate VolumeGroup /dev/md0
lvcreate -L1G -nTestVolume VolumeGroup
mkfs.xfs -f -d size=32m /dev/VolumeGroup/TestVolume
sleep 1
mount -t xfs /dev/VolumeGroup/TestVolume
/mnt -onoatime,nodiratime,usrquota,grpquota
JLee
----- Original Message -----
From: "Dagfinn Ilmari Manns?er" <ilmari@xxxxxxxxxxx>
To: <linux-kernel@xxxxxxxxxxxxxxx>; <linux-xfs@xxxxxxxxxxx>
Sent: Sunday, August 11, 2002 8:27 PM
Subject: kernel BUG at filemap.c:843!
> Hi,
>
> I have been bitten a few times by the BUG() in unlock_page(), both
> with 2.4.19-rc3-xfs and 2.4.19-xfs (the latter checked out from SGI's
> CVS on Aug 10). The system is SCSI-only, with a raid5 array as an LVM
> physical volume and XFS on all the volumes.
>
> Software-wise it's Debian Woody, but the kernel is compiled on a Sid
> box with gcc 2.95.4-16.
>
> Attached are the decoded oops, the module list and the config.
>
> --
> ilmari
>
>
|