I currently run 2.4.17-xfs and tried booting up 2.4.18-xfs this past
weekend, but get an oops during boot...kernel was built with kgcc on
Redhat 7.2. This is a staging server, and I'm trying to test it
out...alas, I can't get that far.
System Configuration:
RedHat 7.2
SMP Abit BP6 dual celeron (mendocino)
LVM 1.0.2 utilities
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/md0 149696 139728 9968 94% /
none 127236 0 127236 0% /dev/shm
/dev/vol0/usr 3804480 726572 3077908 20% /usr
/dev/vol0/tmp 1043776 748 1043028 1% /tmp
/dev/vol0/var 2092352 473024 1619328 23% /var
/dev/vol0/home 3140928 1035388 2105540 33% /home
/dev/vol0/src 2092352 1395288 697064 67% /usr/src
/dev/vol0/archive 13774144 584 13773560 1% /archive
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 sdb1[1] sda1[0]
154496 blocks [2/2] [UU]
lvscan -- ACTIVE "/dev/vol0/tmp" [1.00 GB] striped[2]
lvscan -- ACTIVE "/dev/vol0/src" [2.00 GB] striped[2]
lvscan -- ACTIVE "/dev/vol0/var" [2.00 GB]
lvscan -- ACTIVE "/dev/vol0/home" [3.00 GB]
lvscan -- ACTIVE "/dev/vol0/archive" [13.14 GB] striped[2]
lvscan -- ACTIVE "/dev/vol0/usr" [3.63 GB]
lvscan -- 6 logical volumes with 24.77 GB total in 1 volume group
lvscan -- 6 active logical volumes
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- ACTIVE PV "/dev/sda4" of VG "vol0" [8.07 GB / 4.00 MB free]
pvscan -- ACTIVE PV "/dev/sdb4" of VG "vol0" [16.71 GB / 4.00 MB free]
pvscan -- total: 2 [24.79 GB] / in use: 2 [24.79 GB] / in no VG: 0 [0]
2.4.18.oops.txt
Description: oops / ksymoops output
2.4.18.config.txt
Description: .config
|