First: Happy new year all!!
On Sun, 30 Dec 2001 13:19:16 +0100 (CET), Seth Mos wrote:
[...]
>> This is what I got (dramatically truncated because of 60,000 lines
output!!!):
>
>Ick! We need a expert in here.
This is why I'm asking here. :-)
[...]
>Can you give some hardware details about the machine? I am not really
>suspecting that your hardware is broken but sometimes slight variations in
>a machine config make it do funny things.
Ok.
Fileserver:~# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 451.028
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 897.84
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 451.028
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 901.12
Fileserver:~# free
total used free shared buffers cached
Mem: 514068 509088 4980 0 26976 275744
-/+ buffers/cache: 206368 307700
Swap: 1670720 6632 1664088
Fileserver:~# uname -a
Linux Fileserver.my.domain.de 2.4.17-xfs #1 SMP Sat Dec 29 16:53:18 CET 2001
i686 unknown
Fileserver:~# less /boot/config-2.4.17-xfs
CONFIG_MPENTIUMIII=y
[...]
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
[...]
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_MULTIQUAD is not set
CONFIG_HAVE_DEC_LOCK=y
Fileserver:~# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xd0000000 [0xdfffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 4, function 0:
ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 2).
Bus 0, device 4, function 1:
IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=32.
I/O at 0xd800 [0xd80f].
Bus 0, device 4, function 2:
USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 1).
IRQ 12.
Master Capable. Latency=32.
I/O at 0xd400 [0xd41f].
Bus 0, device 4, function 3:
Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 10, function 0:
SCSI storage controller: Adaptec AHA-2940U2/W (rev 0).
IRQ 11.
Master Capable. Latency=32. Min Gnt=39.Max Lat=25.
I/O at 0xd000 [0xd0ff].
Non-prefetchable 64 bit memory at 0xc7800000 [0xc7800fff].
Bus 0, device 11, function 0:
Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 36).
IRQ 10.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0xb800 [0xb87f].
Non-prefetchable 32 bit memory at 0xc7000000 [0xc700007f].
Bus 1, device 0, function 0:
VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 2).
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xc8000000 [0xcbffffff].
Fileserver:~# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IFT Model: 3102 Rev: 0223
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: easyRAID Model: II Rev:
Type: Direct-Access ANSI SCSI revision: 02
Dec 29 17:12:05 Fileserver kernel: Vendor: easyRAID Model: II
Rev:
Dec 29 17:12:05 Fileserver kernel: Type: Direct-Access
ANSI SCSI revision: 02
Dec 29 17:12:05 Fileserver kernel: (scsi0:A:4): 80.000MB/s transfers
(40.000MHz,
offset 31, 16bit)
Dec 29 17:12:05 Fileserver kernel: SCSI device sdc: 720355328 512-byte hdwr
sect
ors (368822 MB)
Dec 29 17:12:05 Fileserver kernel: sdc: sdc1 < sdc5 >
Disk Drive: /dev/sdc
Size: 368821927936 bytes
Heads: 255 Sectors per Track: 63 Cylinders: 44840
Disk /dev/sdc: 255 heads, 63 sectors, 44840 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 44840 360177268+ 5 Extended
/dev/sdc5 1 44840 360177237 83 Linux
Anything else that might be interesting?
>Since you have hardware raid I am asuming you are running SMP and possibly
>highmem? Is this a self built machine or a certain "brand" Like Dell, HP,
SMP: yes, highmem: NO
It's a self-built machine, not a brand machine.
>> Still any ideas?!
>
>I am out. You might get an answer next year or so :-)
That's fine for me. It IS next year now... :-)
>Holidays and all.
Thanks, you too.
Ralf
--
Verkaufe Original-BMW-Raeder: L I N U X .~.
http://adsl-bergs.rz.rwth-aachen.de/~rabe The Choice /V\
of a GNU /( )\
Generation ^^-^^
|