All,
Am debugging an FTP server and found a 2 GB file size limit.... I think!
I ssh from desk (Indigo2) to Linux 2.4.14/XFS server with array on it (RAID
5 XFS based on 7.2/1.0.2a installer).
(FWIW Dual PII-400/256/Software RAID on OS, and Raid 5 over 8 x 9 GB drives.
>From Array Server I establish several FTP connections to servers to pull
over a tar blob of the docroot.
(one such transfer is shown below)
The trusty O200's pack up a nice 2.3 GB file nightly of data, and I ftp it
over.. But it seems to stop at
2147483647 bytes every time! WHere is the wall?
Thanks!
John Westerdale
Demo of truncation:
ftp> ls -al
227 Entering Passive Mode (10,41,14,40,29,142)
150 Opening ASCII mode data connection for '/bin/ls'.
total 10664472
drwxrwxr-x 2 root sys 4096 Dec 17 03:18 .
drwxr-xr-x 5 root sys 52 Dec 6 14:18 ..
-rw-r--r-- 1 root sys 2689342400 Dec 17 02:38
Docroot_Mon-Dec-17-02-30-AM.tar.gz
-rw-r--r-- 1 root sys 2689345471 Dec 16 02:38
Docroot_Sun-Dec-16-02-30-AM.tar.gz
-rw-r--r-- 1 root sys 40749451 Dec 17 02:39
Svrroot_Mon-Dec-17-02-30-AM.tar.gz
-rw-r--r-- 1 root sys 40749451 Dec 16 02:39
Svrroot_Sun-Dec-16-02-30-AM.tar.gz
226 Transfer complete.
ftp> bin
200 Type set to I.
ftp> get Svrroot_Mon-Dec-17-02-30-AM.tar.gz
local: Svrroot_Mon-Dec-17-02-30-AM.tar.gz remote:
Svrroot_Mon-Dec-17-02-30-AM.tar.gz
227 Entering Passive Mode (10,41,14,40,29,143)
150 Opening BINARY mode data connection for
'Svrroot_Mon-Dec-17-02-30-AM.tar.gz' (40749451 bytes).
226 Transfer complete.
40749451 bytes received in 3.55 secs (1.1e+04 Kbytes/sec)
ftp> quit
221 Goodbye.
[root@H0004947 dura]# ls -al
total 4273904
drwxr-xr-x 2 root root 4096 Dec 17 19:03 .
drwxr-xr-x 8 root root 91 Dec 14 21:30 ..
-rw-r--r-- 1 root root 2147483647 Dec 14 20:41
Docroot_Fri-Dec-14-02-30-AM.tar.gz
-rw-r--r-- 1 root root 2147483647 Dec 17 19:00
Docroot_Mon-Dec-17-02-30-AM.tar.gz
-rw-r--r-- 1 root root 40746690 Dec 14 21:18
Svrroot_Fri-Dec-14-02-30-AM.tar.gz
-rw-r--r-- 1 root root 40749451 Dec 17 19:03
Svrroot_Mon-Dec-17-02-30-AM.tar.gz
[root@H0004947 dura]#
|