xfs
[Top] [All Lists]

Who / What's using Linux XFS?

To: linux-xfs@xxxxxxxxxxx
Subject: Who / What's using Linux XFS?
From: kent robotti <robotti@xxxxxxxxxxxxxx>
Date: 30 Oct 2001 11:55:16 -0800
Sender: owner-linux-xfs@xxxxxxxxxxx

Hi all -

I'd like to put a page up on the web site detailing the various
applications, distributions, installations, and embedded products using
XFS for Linux.

I'd appreciate some submissions; examples below.

Thanks!

-Eric


This is a cd boot/rescue system with XFS support.

This is the home page for it.

http://www.tux.org/pub/people/kent-robotti/looplinux/rip/index.html

Begin3
Title:           RIP
Version:         42
Entered-date:    15OCT2001
Description:     Small ram linux system for the purpose of system booting
                 or repairing, a boot/rescue system.
                 You can put this system on a cd disk and boot it.
                 It's more or less designed for non-networked, stand-alone,
                 home pc hard drive boot/rescue/backup!
                 It has large file support, you can use the programs mke2fs,
                 mkdosfs, mkreiserfs, mkfs.xfs, mkfs.jfs, split, mount,
                 tar, gzip,bzip2, and busybox for files larger than 2GB!
                 You can only have files larger than 2GB on a ext2/3, 
                 reiserfs, jfs, or xfs partition.
                 The programs e2fsck, mke2fs, and tune2fs have ext3
                 filesystem support.
                 It includes the fat16/32, ext2/3, and reiserfs partition 
                 resizing programs 'parted, resize_reiserfs'.
                 It also includes the partition image program 'partimage'
                 which saves partitions in the ext2, ext3, reiserfs, 
                 jfs, xfs, ntfs, fat16, and fat32 formats to an image
                 file.  Only used blocks are copied to save space and
                 increase the speed.  The image file can be compressed,
                 in gzip, or bzip2 formats.
                 It also includes the 'mc' file manager!
                 It has support for these filesystems.
                 ext2     <Linux filesystem, read-write>
                 iso9660  <Cdrom filesystem + joliet extensions, read-only>
                 jfs      <Linux filesystem, read-write>
                 msdos    <Dos filesystem, read-write>
                 ntfs     <Windows NT filesystem, read-only>
                 reiserfs <Linux filesystem, read-write>
                 ufs      <FreeBSD, NetBSD, OpenBSD, & Sun/Solaris
                           filesystems, read-write>
                 umsdos   <Linux dos filesystem, read-write>
                 vfat     <Win9x filesystem fat16 and 32, read-write>
                 xfs      <Linux filesystem, read-write>
                 The kernel is version 2.4.12, it has support for IDE
                 and SCSI hard drives.
                 You need at least 12mb of RAM and a 486dx CPU to boot it.
Keywords:        CD Boot/Rescue System!
Author:          robotti@xxxxxxxxxxxxxx (Kent Robotti)
Maintained-by:
Primary-site:    ftp://ibiblio.org/pub/Linux/system/recovery
                 rip-42.iso.bin 3616Kb
Alternate-site:
Platforms:       Linux or dos/win system.
Copying-policy:  GPL
End



This is a root image with XFS support, it allows you to install
the slackware linux distribution on a dos/win9x system, using the
loop device or a umsdos filesystem.

You can also install slackware on it's own linux partition.

loopslak.bin 1404kb

This is the home page for it.

http://www.tux.org/pub/people/kent-robotti/looplinux
ftp://ftp.tux.org/pub/people/kent-robotti/looplinux

There's more info at the above site.



<Prev in Thread] Current Thread [Next in Thread>