xfs
[Top] [All Lists]

Re: Corruption of in-memory data detected.

To: Bryan-TheBS-Smith <b.j.smith@xxxxxxxx>
Subject: Re: Corruption of in-memory data detected.
From: Marc Schmitt <schmitt@xxxxxxxxxxx>
Date: Wed, 24 Oct 2001 23:10:55 +0200
Cc: linux-xfs@xxxxxxxxxxx
References: <3BD4137A.8040406@xxxxxxxxxxx> <1003938254.20357.76.camel@xxxxxxxxxxxxxxxxxxxxxx> <3BD72420.3E2B80B@xxxxxxxxxxx> <3BD728E2.905F38FD@xxxxxxxx>
Sender: owner-linux-xfs@xxxxxxxxxxx
Hi Bryan,

Please check the initial post:

Quoted:
- STL2 MB with 512MB RAM, 2 CPUs (866MHz)
- 3 x 3ware RAID Controller
- 20 x 80GB disks attached in blocks of 4 with RAID 5 (5x240GB)
- md0 is a RAID 0 over the 5 RAID 5 devices

Greetz
        Marc

Bryan-TheBS-Smith wrote:
> Dumb question:
> Why are you using the md0 device?  3Ware uses the sdX0 devices,
> right?  Or are you appending/striping/mirroring across multiple
> 3Ware devices?  If so, then your issue is probably not the 3Ware
> drivers.
> 
> -- TheBS


<Prev in Thread] Current Thread [Next in Thread>