At 14:44 25-9-2001 -0400, Murthy Kambhampaty wrote:
I am having a problem installing with the XFS 1.0.1. installer to a RAID5
array on a Mylex Acceleraid 352: the install goes fine, but when I reboot
LILO hangs LI
My system is a SuperMicro server with ServerWorks HE chipset, one SCSI HDD
on channel A and Mylex card at PCI slot 4. All partitions
(/,/boot,/var,/home) are formatted XFS, swap is on /dev/sda. If I install
the entire system on /dev/sda, I have no problems.
You will have to flip the LBA addressing switch back and forth to see if it
is correct. If your lilo.conf has the linear option included you might try
removing it and running lilo again.
It has to do with the LBA translation or lack of it. Sometimes it is also
called Large disk support or something to do with DOS.
Cheers
--
Seth
Every program has two purposes one for which
it was written and another for which it wasn't
I use the last kind.
|