Linux version 2.4.3-SGI_XFS_1.0.1 (root@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Jul 9 14:27:56 CDT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ff87000 (usable) BIOS-e820: 000000000ff87000 - 000000000ffa6000 (ACPI data) BIOS-e820: 000000000ffa6000 - 0000000010000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 65415 zone(0): 4096 pages. zone(1): 61319 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 IMCR and PIC compatibility mode. OEM ID: DELL Product ID: Opti GX400 APIC at: 0x0 BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor) Processors: 0 Kernel command line: auto BOOT_IMAGE=linux ro root=344 BOOT_FILE=/boot/vmlinuz-2.4.3-SGI_XFS_1.0.1 hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1285.364 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2562.45 BogoMIPS Memory: 251808k/261660k available (2284k kernel code, 7424k reserved, 100k data, 232k init, 0k highmem) kdb version 1.8 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights Reserved Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) VFS: Diskquotas version dquot_6.5.0 initialized CPU: Before vendor init, caps: 3febf9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 3febf9ff 00000000 00000000 00000000 CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 CPU: Common caps: 3febf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1300MHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 pty: 2048 Unix98 ptys configured block: queued sectors max/low 167194kB/55731kB, 512 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 4 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive hdb: QUANTUM FIREBALLP AS10.2, ATA DISK drive hdc: SAMSUNG CDRW/DVD SM-308B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 20066251 sectors (10274 MB) w/1902KiB Cache, CHS=1249/255/63, UDMA(100) hdb: 20066251 sectors (10274 MB) w/1902KiB Cache, CHS=1249/255/63, UDMA(100) Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 hdb4 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Serial driver version 5.05a (2001-03-20) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md.c: sizeof(mdp_super_t) = 4096 autodetecting RAID arrays autorun ... ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Start mounting filesystem: ide0(3,68) Ending clean XFS mount for filesystem: ide0(3,68) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 232k freed Adding Swap: 530136k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.251 $ time 14:45:43 Jul 9 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1f.2 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 9 for device 00:1f.4 PCI: Setting latency timer of device 00:1f.4 to 64 usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected Start mounting filesystem: ide0(3,65) Ending clean XFS mount for filesystem: ide0(3,65) Start mounting filesystem: ide0(3,67) Starting XFS recovery on filesystem: ide0(3,67) (dev: 3/67) Ending XFS recovery on filesystem: ide0(3,67) (dev: 3/67) SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SAMSUNG Model: CDRW/DVD SM-308B Rev: M002 Type: CD-ROM ANSI SCSI revision: 02 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 8 0x378: readIntrThreshold is 8 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x14 cfgB=0x40 0x378: ECP settings irq= dma= parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(08) parport0: assign_addrs: aa5500ff(08) parport0: cpp_daisy: aa5500ff(08) parport0: assign_addrs: aa5500ff(08) xfs_create looping, dir ino 0x40089, ino 0x40092, ide0(3,67) ip_conntrack (2044 buckets, 16352 max) PCI: Found IRQ 11 for device 02:0c.0 3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt eth0: 3Com PCI 3c905C Tornado at 0xec80, 00:b0:d0:f5:1a:99, IRQ 11 product code 0000 rev 00.3 date 07-16-104 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. eth0: scatter/gather disabled. h/w checksums enabled eth0: using NWAY device table, not 8 xfs_create looping, dir ino 0x40089, ino 0x40093, ide0(3,67) xfs_create looping, dir ino 0x140081, ino 0x14008b, ide0(3,67) xfs_create looping, dir ino 0x140081, ino 0x14008c, ide0(3,67) xfs_create looping, dir ino 0x40089, ino 0x40095, ide0(3,67) xfs_create looping, dir ino 0x40089, ino 0x40096, ide0(3,67) xfs_create looping, dir ino 0x40089, ino 0x40098, ide0(3,67) xfs_create looping, dir ino 0x40089, ino 0x40099, ide0(3,67) xfs_create looping, dir ino 0x40089, ino 0x4009a, ide0(3,67) xfs_create looping, dir ino 0x40089, ino 0x400a9, ide0(3,67) Intel 810 + AC97 Audio, version 0.02, 14:45:28 Jul 9 2001 PCI: Found IRQ 10 for device 00:1f.5 PCI: The same IRQ used for device 00:1f.3 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH2 found at IO 0xdc40 and 0xd800, IRQ 10 ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Unknown) i810_audio: setting clocking to 41319