xfs
[Top] [All Lists]

Re: 2.4.5 panic while starting aic7xxx (fwd)

To: linux-xfs@xxxxxxxxxxx
Subject: Re: 2.4.5 panic while starting aic7xxx (fwd)
From: Steve Lord <lord@xxxxxxx>
Date: Wed, 30 May 2001 13:03:51 -0500
Sender: owner-linux-xfs@xxxxxxxxxxx
Forwarded from linux-kernel, since this was originally asked on the xfs list.

Steve

------- Forwarded Message

Date:    Wed, 30 May 2001 09:19:02 -0600
From:    "Justin T. Gibbs" <gibbs@xxxxxxxxxxx>
To:      Michael David <michael@xxxxxxxxxxxx>
cc:      linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: 2.4.5 panic while starting aic7xxx 

>SCSI subsystem driver Revision: 1.00
>PCI: Found IRQ 11 for device 00:0c.0
>scsi0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
>        <Adaptec 2940 Ultra2 SCSI adapter>
>        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
>ahc_intr: AWAITING_MSG for an SCB that does not have a waiting message
>SCSIID = 7, target_mask = 1
>Kernel panic: SCB = 3, SCB Control = 40, MSG_OUT = 80 SCB flags = 6000
>In interrupt handler - not syncing

This looks like the firmware file is not in sync with the rest
of the driver.  Depending on the host environment, you may be
able to rebuild the firmware yourself.  Just check the box in
the kernel config section for the aic7xxx driver to rebuild
the firmware.

- --
Justin
- -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


------- End of Forwarded Message




<Prev in Thread] Current Thread [Next in Thread>
  • Re: 2.4.5 panic while starting aic7xxx (fwd), Steve Lord <=