Comment # 3
on bug 1045
from Dmitry
HW RAID status.
Copyright (c) 2004-2011 Areca, Inc. All Rights Reserved.
Areca CLI, Version: 1.86, Arclib: 310, Date: Nov 1 2011( Linux )
S # Name Type Interface
==================================================
[*] 1 ARC-1260 Raid Controller PCI
==================================================
CMD Description
==========================================================
main Show Command Categories.
set General Settings.
rsf RaidSet Functions.
vsf VolumeSet Functions.
disk Physical Drive Functions.
sys System Functions.
net Ethernet Functions.
event Event Functions.
hw Hardware Monitor Functions.
mail Mail Notification Functions.
snmp SNMP Functions.
ntp NTP Functions.
exit Exit CLI.
==========================================================
Command Format: <CMD> [Sub-Command] [Parameters].
Note: Use <CMD> -h or -help to get details.
CLI> sys info
The System Information
===========================================
Main Processor : 500MHz
CPU ICache Size : 32KB
CPU DCache Size : 32KB
CPU SCache Size : 0KB
System Memory : 256MB/333MHz/ECC
Firmware Version : V1.49 2010-12-02
BOOT ROM Version : V1.49 2010-12-02
Serial Number : Y706CAANAR600367
Controller Name : ARC-1260
Current IP Address : 192.168.90.250
===========================================
GuiErrMsg<0x00>: Success.
CLI> rsf info
# Name Disks TotalCap FreeCap DiskChannels State
===============================================================================
1 Raid Set # 00 12 9000.0GB 0.0GB 123F465E9ABD Normal
===============================================================================
GuiErrMsg<0x00>: Success.
CLI> vsf info
# Name Raid Name Level Capacity Ch/Id/Lun State
===============================================================================
1 ARC-1260-VOL#00 Raid Set # 00 Raid6 7500.0GB 00/00/00 Normal
===============================================================================
GuiErrMsg<0x00>: Success.
CLI> disk info
# Ch# ModelName Capacity Usage
===============================================================================
1 1 ST3750640NS 750.2GB Raid Set # 00
2 2 ST3750640NS 750.2GB Raid Set # 00
3 3 ST3750640NS 750.2GB Raid Set # 00
4 4 ST3750640NS 750.2GB Raid Set # 00
5 5 GB1000EAMYC 1000.2GB Raid Set # 00
6 6 ST3750330NS 750.2GB Raid Set # 00
7 7 GB1000EAMYC 1000.2GB HotSpare[Global]
8 8 GB1000EAMYC 1000.2GB HotSpare[Global]
9 9 ST3750640NS 750.2GB Raid Set # 00
10 10 ST3750640NS 750.2GB Raid Set # 00
11 11 ST3750640NS 750.2GB Raid Set # 00
12 12 ST3750330NS 750.2GB HotSpare[Global]
13 13 ST3750640NS 750.2GB Raid Set # 00
14 14 ST3750640NS 750.2GB Raid Set # 00
15 15 ST3750640NS 750.2GB Raid Set # 00
16 16 N.A. 0.0GB N.A.
===============================================================================
GuiErrMsg<0x00>: Success.
CLI> hw info
The Hardware Monitor Information
===========================================
Fan#1 Speed (RPM) : 1188
Battery Status : 100%
HDD #1 Temp. : 31
HDD #2 Temp. : 30
HDD #3 Temp. : 29
HDD #4 Temp. : 34
HDD #5 Temp. : 31
HDD #6 Temp. : 27
HDD #7 Temp. : 29
HDD #8 Temp. : 33
HDD #9 Temp. : 32
HDD #10 Temp. : 31
HDD #11 Temp. : 29
HDD #12 Temp. : 32
HDD #13 Temp. : 33
HDD #14 Temp. : 33
HDD #15 Temp. : 31
HDD #16 Temp. : 0
===========================================
GuiErrMsg<0x00>: Success.
CLI> event info
Date-Time Device Event Type Elapsed Time Errors
===============================================================================
2014-01-28 04:17:30 Proxy Or Inband HTTP Log In
2014-01-27 05:06:56 Proxy Or Inband HTTP Log In
2014-01-27 04:14:16 H/W MONITOR Raid Powered On
2014-01-27 03:58:22 H/W MONITOR Raid Powered On
2014-01-27 03:54:31 RS232 Terminal VT100 Log In
2014-01-27 03:54:16 H/W MONITOR Raid Powered On
2014-01-26 11:06:04 Proxy Or Inband HTTP Log In
2014-01-25 12:32:07 Proxy Or Inband HTTP Log In
2014-01-24 15:31:35 Proxy Or Inband HTTP Log In
2014-01-24 14:46:17 ARC-1260-VOL#00 Complete Rebuild 006:22:29
2014-01-24 08:23:48 ARC-1260-VOL#00 Start Rebuilding
2014-01-24 08:23:46 IDE Channel #12 Device Failed
2014-01-24 08:23:46 Raid Set # 00 Rebuild RaidSet
2014-01-24 08:23:45 Raid Set # 00 RaidSet Degraded
2014-01-24 08:23:45 ARC-1260-VOL#00 Volume Degraded
2014-01-24 08:09:00 Proxy Or Inband HTTP Log In
2014-01-24 07:12:34 H/W MONITOR Raid Powered On
2014-01-24 06:23:01 H/W MONITOR Raid Powered On
===============================================================================
GuiErrMsg<0x00>: Success.
CLI> sys showcfg
The System Configuration
=====================================================
System Beeper Setting : Disabled
Background Task Priority : Medium(50%)
JBOD/RAID Configuration : RAID
Max SATA Mode Supported : SATA300+NCQ
HDD Read Ahead Cache : Enabled
Volume Data Read Ahead : Normal
Stagger Power On Control : 0.7
Spin Down Idle HDD (Minutes) : Disabled
HDD SMART Status Polling : Enabled
Empty HDD Slot LED : ON
Auto Activate Incomplete Raid : Enabled
Disk Write Cache Mode : Enabled
Disk Capacity Truncation Mode : Multiples Of 10G
=====================================================
GuiErrMsg<0x00>: Success.