Hi,
Attached is the patch to implement comments about styling
and few other changes.
Following is list of changes.
1. Incorporated Randy's comment about C99 format for s2io_driver
structure initialization.
2. Driver version displayed at load time.
3. If initialization failed in s2io_init_nic(), appropriate error
codes are returned.
4. #ifdef SET_ETHTOOL_OPS removed in couple of places.
Signed-off-by: Raghavendra Koushik <raghavendra.koushik@xxxxxxxx>
Signed-off-by: Ravinandan Arakali <ravinandan.arakali@xxxxxxxx>
---
diff -urN vanilla-linux/drivers/net/s2io.c linux-2.6.8.1/drivers/net/s2io.c
--- vanilla-linux/drivers/net/s2io.c 2004-10-26 16:45:59.090250752 -0700
+++ linux-2.6.8.1/drivers/net/s2io.c 2004-10-26 16:45:47.840960904 -0700
@@ -250,10 +250,10 @@
MODULE_DEVICE_TABLE(pci, s2io_tbl);
static struct pci_driver s2io_driver = {
- name:"S2IO",
- id_table:s2io_tbl,
- probe:s2io_init_nic,
- remove:__devexit_p(s2io_rem_nic),
+ .name = "S2IO",
+ .id_table = s2io_tbl,
+ .probe = s2io_init_nic,
+ .remove = __devexit_p(s2io_rem_nic),
};
/* A simplifier macro used both by init and free shared_mem Fns(). */
@@ -4603,6 +4603,9 @@
struct config_param *config;
+ DBG_PRINT(ERR_DBG, "Loading S2IO driver with %s\n",
+ s2io_driver_version);
+
if ((ret = pci_enable_device(pdev))) {
DBG_PRINT(ERR_DBG,
"s2io_init_nic: pci_enable_device failed\n");
@@ -4720,6 +4723,7 @@
if (init_shared_mem(sp)) {
DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
dev->name);
+ ret = -ENOMEM;
goto mem_alloc_failed;
}
@@ -4728,6 +4732,7 @@
if (!sp->bar0) {
DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem1\n",
dev->name);
+ ret = -ENOMEM;
goto bar0_remap_failed;
}
@@ -4736,6 +4741,7 @@
if (!sp->bar1) {
DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem2\n",
dev->name);
+ ret = -ENOMEM;
goto bar1_remap_failed;
}
@@ -4756,9 +4762,7 @@
dev->set_multicast_list = &s2io_set_multicast;
dev->do_ioctl = &s2io_ioctl;
dev->change_mtu = &s2io_change_mtu;
-#ifdef SET_ETHTOOL_OPS
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
-#endif
/*
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
@@ -4788,6 +4792,7 @@
if (s2io_set_swapper(sp)) {
DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
dev->name);
+ ret = -EAGAIN;
goto set_swap_failed;
}
@@ -4802,6 +4807,7 @@
DBG_PRINT(ERR_DBG,
"%s: S2IO: swapper settings are wrong\n",
dev->name);
+ ret = -EAGAIN;
goto set_swap_failed;
}
@@ -4874,6 +4880,7 @@
if (register_netdev(dev)) {
DBG_PRINT(ERR_DBG, "Device registration failed\n");
+ ret = -ENODEV;
goto register_failed;
}
@@ -4900,7 +4907,7 @@
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
- return -ENODEV;
+ return ret;
}
/**
diff -urN vanilla-linux/drivers/net/s2io.h linux-2.6.8.1/drivers/net/s2io.h
--- vanilla-linux/drivers/net/s2io.h 2004-10-26 16:45:59.329214424 -0700
+++ linux-2.6.8.1/drivers/net/s2io.h 2004-10-26 16:45:48.079924576 -0700
@@ -50,10 +50,6 @@
#define ALIGN_SIZE 127
#define PCIX_COMMAND_REGISTER 0x62
-#ifndef SET_ETHTOOL_OPS
-#define SUPPORTED_10000baseT_Full (1 << 12)
-#endif
-
/*
* Debug related variables.
*/
@@ -873,9 +869,7 @@
int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
static int verify_xena_quiescence(u64 val64, int flag);
-#ifdef SET_ETHTOOL_OPS
static struct ethtool_ops netdev_ethtool_ops;
-#endif
static void s2io_set_link(unsigned long data);
static void s2io_card_down(nic_t * nic);
static int s2io_card_up(nic_t * nic);
|