On Mon, Nov 01, 2004 at 02:01:44PM +0100, Christoph Hellwig wrote:
> Move the devicetype-specific functions from net_init.c to the
> devicetype-specific files under net/.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
>
> --- 1.24/drivers/net/net_init.c 2004-04-06 00:46:26 +02:00
> +++ edited/drivers/net/net_init.c 2004-11-01 13:20:45 +01:00
> @@ -105,260 +105,6 @@
> }
> EXPORT_SYMBOL(alloc_netdev);
>
> -/**
> - * alloc_etherdev - Allocates and sets up an ethernet device
> - * @sizeof_priv: Size of additional driver-private structure to be allocated
> - * for this ethernet device
> - *
> - * Fill in the fields of the device structure with ethernet-generic
> - * values. Basically does everything except registering the device.
> - *
> - * Constructs a new net device, complete with a private data area of
> - * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> - * this private data area.
> - */
> -
> -struct net_device *alloc_etherdev(int sizeof_priv)
> -{
> - return alloc_netdev(sizeof_priv, "eth%d", ether_setup);
> -}
> -
> -EXPORT_SYMBOL(alloc_etherdev);
> -
> -static int eth_mac_addr(struct net_device *dev, void *p)
> -{
> - struct sockaddr *addr=p;
> - if (netif_running(dev))
> - return -EBUSY;
> - memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
> - return 0;
> -}
> -
> -static int eth_change_mtu(struct net_device *dev, int new_mtu)
> -{
> - if ((new_mtu < 68) || (new_mtu > 1500))
> - return -EINVAL;
> - dev->mtu = new_mtu;
> - return 0;
> -}
> -
> -#ifdef CONFIG_FDDI
> -
> -/**
> - * alloc_fddidev - Register FDDI device
> - * @sizeof_priv: Size of additional driver-private structure to be allocated
> - * for this FDDI device
> - *
> - * Fill in the fields of the device structure with FDDI-generic values.
> - *
> - * Constructs a new net device, complete with a private data area of
> - * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> - * this private data area.
> - */
> -
> -struct net_device *alloc_fddidev(int sizeof_priv)
> -{
> - return alloc_netdev(sizeof_priv, "fddi%d", fddi_setup);
> -}
> -
> -EXPORT_SYMBOL(alloc_fddidev);
> -
> -static int fddi_change_mtu(struct net_device *dev, int new_mtu)
> -{
> - if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
> - return(-EINVAL);
> - dev->mtu = new_mtu;
> - return(0);
> -}
> -
> -#endif /* CONFIG_FDDI */
> -
> -#ifdef CONFIG_HIPPI
> -
> -static int hippi_change_mtu(struct net_device *dev, int new_mtu)
> -{
> - /*
> - * HIPPI's got these nice large MTUs.
> - */
> - if ((new_mtu < 68) || (new_mtu > 65280))
> - return -EINVAL;
> - dev->mtu = new_mtu;
> - return(0);
> -}
> -
> -
> -/*
> - * For HIPPI we will actually use the lower 4 bytes of the hardware
> - * address as the I-FIELD rather than the actual hardware address.
> - */
> -static int hippi_mac_addr(struct net_device *dev, void *p)
> -{
> - struct sockaddr *addr = p;
> - if (netif_running(dev))
> - return -EBUSY;
> - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
> - return 0;
> -}
> -
> -static int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms
> *p)
> -{
> - /* Never send broadcast/multicast ARP messages */
> - p->mcast_probes = 0;
> -
> - /* In IPv6 unicast probes are valid even on NBMA,
> - * because they are encapsulated in normal IPv6 protocol.
> - * Should be a generic flag.
> - */
> - if (p->tbl->family != AF_INET6)
> - p->ucast_probes = 0;
> - return 0;
> -}
> -
> -static void hippi_setup(struct net_device *dev)
> -{
> - dev->set_multicast_list = NULL;
> - dev->change_mtu = hippi_change_mtu;
> - dev->hard_header = hippi_header;
> - dev->rebuild_header = hippi_rebuild_header;
> - dev->set_mac_address = hippi_mac_addr;
> - dev->hard_header_parse = NULL;
> - dev->hard_header_cache = NULL;
> - dev->header_cache_update = NULL;
> - dev->neigh_setup = hippi_neigh_setup_dev;
> -
> - /*
> - * We don't support HIPPI `ARP' for the time being, and probably
> - * never will unless someone else implements it. However we
> - * still need a fake ARPHRD to make ifconfig and friends play ball.
> - */
> - dev->type = ARPHRD_HIPPI;
> - dev->hard_header_len = HIPPI_HLEN;
> - dev->mtu = 65280;
> - dev->addr_len = HIPPI_ALEN;
> - dev->tx_queue_len = 25 /* 5 */;
> - memset(dev->broadcast, 0xFF, HIPPI_ALEN);
> -
> -
> - /*
> - * HIPPI doesn't support broadcast+multicast and we only use
> - * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
> - */
> - dev->flags = 0;
> -}
> -
> -/**
> - * alloc_hippi_dev - Register HIPPI device
> - * @sizeof_priv: Size of additional driver-private structure to be allocated
> - * for this HIPPI device
> - *
> - * Fill in the fields of the device structure with HIPPI-generic values.
> - *
> - * Constructs a new net device, complete with a private data area of
> - * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> - * this private data area.
> - */
> -
> -struct net_device *alloc_hippi_dev(int sizeof_priv)
> -{
> - return alloc_netdev(sizeof_priv, "hip%d", hippi_setup);
> -}
> -
> -EXPORT_SYMBOL(alloc_hippi_dev);
> -
> -#endif /* CONFIG_HIPPI */
> -
> -void ether_setup(struct net_device *dev)
> -{
> - /* Fill in the fields of the device structure with ethernet-generic
> values.
> - This should be in a common file instead of per-driver. */
> -
> - dev->change_mtu = eth_change_mtu;
> - dev->hard_header = eth_header;
> - dev->rebuild_header = eth_rebuild_header;
> - dev->set_mac_address = eth_mac_addr;
> - dev->hard_header_cache = eth_header_cache;
> - dev->header_cache_update= eth_header_cache_update;
> - dev->hard_header_parse = eth_header_parse;
> -
> - dev->type = ARPHRD_ETHER;
> - dev->hard_header_len = ETH_HLEN;
> - dev->mtu = 1500; /* eth_mtu */
> - dev->addr_len = ETH_ALEN;
> - dev->tx_queue_len = 1000; /* Ethernet wants good queues */
> -
> - memset(dev->broadcast,0xFF, ETH_ALEN);
> -
> - /* New-style flags. */
> - dev->flags = IFF_BROADCAST|IFF_MULTICAST;
> -}
> -EXPORT_SYMBOL(ether_setup);
> -
> -#ifdef CONFIG_FDDI
> -
> -void fddi_setup(struct net_device *dev)
> -{
> - /*
> - * Fill in the fields of the device structure with FDDI-generic values.
> - * This should be in a common file instead of per-driver.
> - */
> -
> - dev->change_mtu = fddi_change_mtu;
> - dev->hard_header = fddi_header;
> - dev->rebuild_header = fddi_rebuild_header;
> -
> - dev->type = ARPHRD_FDDI;
> - dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP
> hdr len + 3 pad bytes */
> - dev->mtu = FDDI_K_SNAP_DLEN;
> /* Assume max payload of 802.2 SNAP frame */
> - dev->addr_len = FDDI_K_ALEN;
> - dev->tx_queue_len = 100; /* Long queues on FDDI */
> -
> - memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
> -
> - /* New-style flags */
> - dev->flags = IFF_BROADCAST | IFF_MULTICAST;
> -}
> -EXPORT_SYMBOL(fddi_setup);
> -
> -#endif /* CONFIG_FDDI */
> -
> -#if defined(CONFIG_ATALK) || defined(CONFIG_ATALK_MODULE)
> -
> -static int ltalk_change_mtu(struct net_device *dev, int mtu)
> -{
> - return -EINVAL;
> -}
> -
> -static int ltalk_mac_addr(struct net_device *dev, void *addr)
> -{
> - return -EINVAL;
> -}
> -
> -
> -void ltalk_setup(struct net_device *dev)
> -{
> - /* Fill in the fields of the device structure with localtalk-generic
> values. */
> -
> - dev->change_mtu = ltalk_change_mtu;
> - dev->hard_header = NULL;
> - dev->rebuild_header = NULL;
> - dev->set_mac_address = ltalk_mac_addr;
> - dev->hard_header_cache = NULL;
> - dev->header_cache_update= NULL;
> -
> - dev->type = ARPHRD_LOCALTLK;
> - dev->hard_header_len = LTALK_HLEN;
> - dev->mtu = LTALK_MTU;
> - dev->addr_len = LTALK_ALEN;
> - dev->tx_queue_len = 10;
> -
> - dev->broadcast[0] = 0xFF;
> -
> - dev->flags = IFF_BROADCAST|IFF_MULTICAST|IFF_NOARP;
> -}
> -EXPORT_SYMBOL(ltalk_setup);
> -
> -#endif /* CONFIG_ATALK || CONFIG_ATALK_MODULE */
> -
> int register_netdev(struct net_device *dev)
> {
> int err;
> @@ -404,90 +150,3 @@
>
> EXPORT_SYMBOL(register_netdev);
> EXPORT_SYMBOL(unregister_netdev);
> -
> -#ifdef CONFIG_TR
> -
> -void tr_setup(struct net_device *dev)
> -{
> - /*
> - * Configure and register
> - */
> -
> - dev->hard_header = tr_header;
> - dev->rebuild_header = tr_rebuild_header;
> -
> - dev->type = ARPHRD_IEEE802_TR;
> - dev->hard_header_len = TR_HLEN;
> - dev->mtu = 2000;
> - dev->addr_len = TR_ALEN;
> - dev->tx_queue_len = 100; /* Long queues on tr */
> -
> - memset(dev->broadcast,0xFF, TR_ALEN);
> -
> - /* New-style flags. */
> - dev->flags = IFF_BROADCAST | IFF_MULTICAST ;
> -}
> -
> -/**
> - * alloc_trdev - Register token ring device
> - * @sizeof_priv: Size of additional driver-private structure to be allocated
> - * for this token ring device
> - *
> - * Fill in the fields of the device structure with token ring-generic values.
> - *
> - * Constructs a new net device, complete with a private data area of
> - * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> - * this private data area.
> - */
> -
> -struct net_device *alloc_trdev(int sizeof_priv)
> -{
> - return alloc_netdev(sizeof_priv, "tr%d", tr_setup);
> -}
> -
> -EXPORT_SYMBOL(tr_setup);
> -EXPORT_SYMBOL(alloc_trdev);
> -
> -#endif /* CONFIG_TR */
> -
> -#ifdef CONFIG_NET_FC
> -
> -void fc_setup(struct net_device *dev)
> -{
> - dev->hard_header = fc_header;
> - dev->rebuild_header = fc_rebuild_header;
> -
> - dev->type = ARPHRD_IEEE802;
> - dev->hard_header_len = FC_HLEN;
> - dev->mtu = 2024;
> - dev->addr_len = FC_ALEN;
> - dev->tx_queue_len = 100; /* Long queues on fc */
> -
> - memset(dev->broadcast,0xFF, FC_ALEN);
> -
> - /* New-style flags. */
> - dev->flags = IFF_BROADCAST;
> -}
> -
> -/**
> - * alloc_fcdev - Register fibre channel device
> - * @sizeof_priv: Size of additional driver-private structure to be allocated
> - * for this fibre channel device
> - *
> - * Fill in the fields of the device structure with fibre channel-generic
> values.
> - *
> - * Constructs a new net device, complete with a private data area of
> - * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> - * this private data area.
> - */
> -
> -struct net_device *alloc_fcdev(int sizeof_priv)
> -{
> - return alloc_netdev(sizeof_priv, "fc%d", fc_setup);
> -}
> -
> -EXPORT_SYMBOL(fc_setup);
> -EXPORT_SYMBOL(alloc_fcdev);
> -
> -#endif /* CONFIG_NET_FC */
> -
> --- 1.91/include/linux/netdevice.h 2004-10-26 18:09:33 +02:00
> +++ edited/include/linux/netdevice.h 2004-11-01 13:13:07 +01:00
> @@ -910,10 +910,7 @@
> /* These functions live elsewhere (drivers/net/net_init.c, but related) */
>
> extern void ether_setup(struct net_device *dev);
> -extern void fddi_setup(struct net_device *dev);
> -extern void tr_setup(struct net_device *dev);
> -extern void fc_setup(struct net_device *dev);
> -extern void fc_freedev(struct net_device *dev);
> +
> /* Support for loadable net-drivers */
> extern struct net_device *alloc_netdev(int sizeof_priv, const char *name,
> void (*setup)(struct net_device *));
> ===== net/802/fc.c 1.3 vs edited =====
> --- 1.3/net/802/fc.c 2004-06-24 21:37:35 +02:00
> +++ edited/net/802/fc.c 2004-11-01 13:52:59 +01:00
> @@ -129,3 +129,35 @@
>
> return ntohs(ETH_P_802_2);
> }
> +
> +static void fc_setup(struct net_device *dev)
> +{
> + dev->hard_header = fc_header;
> + dev->rebuild_header = fc_rebuild_header;
> +
> + dev->type = ARPHRD_IEEE802;
> + dev->hard_header_len = FC_HLEN;
> + dev->mtu = 2024;
> + dev->addr_len = FC_ALEN;
> + dev->tx_queue_len = 100; /* Long queues on fc */
> + dev->flags = IFF_BROADCAST;
> +
> + memset(dev->broadcast, 0xFF, FC_ALEN);
> +}
> +
> +/**
> + * alloc_fcdev - Register fibre channel device
> + * @sizeof_priv: Size of additional driver-private structure to be allocated
> + * for this fibre channel device
> + *
> + * Fill in the fields of the device structure with fibre channel-generic
> values.
> + *
> + * Constructs a new net device, complete with a private data area of
> + * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> + * this private data area.
> + */
> +struct net_device *alloc_fcdev(int sizeof_priv)
> +{
> + return alloc_netdev(sizeof_priv, "fc%d", fc_setup);
> +}
> +EXPORT_SYMBOL(alloc_fcdev);
> --- 1.3/net/802/fddi.c 2003-09-29 04:23:30 +02:00
> +++ edited/net/802/fddi.c 2004-11-01 13:12:14 +01:00
> @@ -166,3 +166,44 @@
> }
>
> EXPORT_SYMBOL(fddi_type_trans);
> +
> +static int fddi_change_mtu(struct net_device *dev, int new_mtu)
> +{
> + if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
> + return(-EINVAL);
> + dev->mtu = new_mtu;
> + return(0);
> +}
> +
> +static void fddi_setup(struct net_device *dev)
> +{
> + dev->change_mtu = fddi_change_mtu;
> + dev->hard_header = fddi_header;
> + dev->rebuild_header = fddi_rebuild_header;
> +
> + dev->type = ARPHRD_FDDI;
> + dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP
> hdr len + 3 pad bytes */
> + dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload
> of 802.2 SNAP frame */
> + dev->addr_len = FDDI_K_ALEN;
> + dev->tx_queue_len = 100; /* Long queues on FDDI
> */
> + dev->flags = IFF_BROADCAST | IFF_MULTICAST;
> +
> + memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
> +}
> +
> +/**
> + * alloc_fddidev - Register FDDI device
> + * @sizeof_priv: Size of additional driver-private structure to be allocated
> + * for this FDDI device
> + *
> + * Fill in the fields of the device structure with FDDI-generic values.
> + *
> + * Constructs a new net device, complete with a private data area of
> + * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> + * this private data area.
> + */
> +struct net_device *alloc_fddidev(int sizeof_priv)
> +{
> + return alloc_netdev(sizeof_priv, "fddi%d", fddi_setup);
> +}
> +EXPORT_SYMBOL(alloc_fddidev);
> --- 1.4/net/802/hippi.c 2003-09-29 04:23:30 +02:00
> +++ edited/net/802/hippi.c 2004-11-01 13:53:31 +01:00
> @@ -154,3 +154,92 @@
> }
>
> EXPORT_SYMBOL(hippi_type_trans);
> +
> +static int hippi_change_mtu(struct net_device *dev, int new_mtu)
> +{
> + /*
> + * HIPPI's got these nice large MTUs.
> + */
> + if ((new_mtu < 68) || (new_mtu > 65280))
> + return -EINVAL;
> + dev->mtu = new_mtu;
> + return(0);
> +}
> +
> +/*
> + * For HIPPI we will actually use the lower 4 bytes of the hardware
> + * address as the I-FIELD rather than the actual hardware address.
> + */
> +static int hippi_mac_addr(struct net_device *dev, void *p)
> +{
> + struct sockaddr *addr = p;
> + if (netif_running(dev))
> + return -EBUSY;
> + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
> + return 0;
> +}
> +
> +static int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms
> *p)
> +{
> + /* Never send broadcast/multicast ARP messages */
> + p->mcast_probes = 0;
> +
> + /* In IPv6 unicast probes are valid even on NBMA,
> + * because they are encapsulated in normal IPv6 protocol.
> + * Should be a generic flag.
> + */
> + if (p->tbl->family != AF_INET6)
> + p->ucast_probes = 0;
> + return 0;
> +}
> +
> +static void hippi_setup(struct net_device *dev)
> +{
> + dev->set_multicast_list = NULL;
> + dev->change_mtu = hippi_change_mtu;
> + dev->hard_header = hippi_header;
> + dev->rebuild_header = hippi_rebuild_header;
> + dev->set_mac_address = hippi_mac_addr;
> + dev->hard_header_parse = NULL;
> + dev->hard_header_cache = NULL;
> + dev->header_cache_update = NULL;
> + dev->neigh_setup = hippi_neigh_setup_dev;
> +
> + /*
> + * We don't support HIPPI `ARP' for the time being, and probably
> + * never will unless someone else implements it. However we
> + * still need a fake ARPHRD to make ifconfig and friends play ball.
> + */
> + dev->type = ARPHRD_HIPPI;
> + dev->hard_header_len = HIPPI_HLEN;
> + dev->mtu = 65280;
> + dev->addr_len = HIPPI_ALEN;
> + dev->tx_queue_len = 25 /* 5 */;
> + memset(dev->broadcast, 0xFF, HIPPI_ALEN);
> +
> +
> + /*
> + * HIPPI doesn't support broadcast+multicast and we only use
> + * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
> + */
> + dev->flags = 0;
> +}
> +
> +/**
> + * alloc_hippi_dev - Register HIPPI device
> + * @sizeof_priv: Size of additional driver-private structure to be allocated
> + * for this HIPPI device
> + *
> + * Fill in the fields of the device structure with HIPPI-generic values.
> + *
> + * Constructs a new net device, complete with a private data area of
> + * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> + * this private data area.
> + */
> +
> +struct net_device *alloc_hippi_dev(int sizeof_priv)
> +{
> + return alloc_netdev(sizeof_priv, "hip%d", hippi_setup);
> +}
> +
> +EXPORT_SYMBOL(alloc_hippi_dev);
> --- 1.17/net/802/tr.c 2004-06-24 21:36:53 +02:00
> +++ edited/net/802/tr.c 2004-11-01 13:14:02 +01:00
> @@ -583,6 +583,43 @@
>
> #endif
>
> +static void tr_setup(struct net_device *dev)
> +{
> + /*
> + * Configure and register
> + */
> +
> + dev->hard_header = tr_header;
> + dev->rebuild_header = tr_rebuild_header;
> +
> + dev->type = ARPHRD_IEEE802_TR;
> + dev->hard_header_len = TR_HLEN;
> + dev->mtu = 2000;
> + dev->addr_len = TR_ALEN;
> + dev->tx_queue_len = 100; /* Long queues on tr */
> +
> + memset(dev->broadcast,0xFF, TR_ALEN);
> +
> + /* New-style flags. */
> + dev->flags = IFF_BROADCAST | IFF_MULTICAST ;
> +}
> +
> +/**
> + * alloc_trdev - Register token ring device
> + * @sizeof_priv: Size of additional driver-private structure to be allocated
> + * for this token ring device
> + *
> + * Fill in the fields of the device structure with token ring-generic values.
> + *
> + * Constructs a new net device, complete with a private data area of
> + * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> + * this private data area.
> + */
> +struct net_device *alloc_trdev(int sizeof_priv)
> +{
> + return alloc_netdev(sizeof_priv, "tr%d", tr_setup);
> +}
> +
> /*
> * Called during bootup. We don't actually have to initialise
> * too much for this.
> @@ -604,3 +641,4 @@
>
> EXPORT_SYMBOL(tr_source_route);
> EXPORT_SYMBOL(tr_type_trans);
> +EXPORT_SYMBOL(alloc_trdev);
> --- 1.8/net/appletalk/Makefile 2004-08-18 23:35:04 +02:00
> +++ edited/net/appletalk/Makefile 2004-11-01 13:22:42 +01:00
> @@ -4,6 +4,6 @@
>
> obj-$(CONFIG_ATALK) += appletalk.o
>
> -appletalk-y := aarp.o ddp.o
> +appletalk-y := aarp.o ddp.o dev.o
> appletalk-$(CONFIG_PROC_FS) += atalk_proc.o
> appletalk-$(CONFIG_SYSCTL) += sysctl_net_atalk.o
> --- 1.9/net/ethernet/eth.c 2004-10-05 23:51:01 +02:00
> +++ edited/net/ethernet/eth.c 2004-11-01 13:54:23 +01:00
> @@ -245,3 +245,64 @@
> }
>
> EXPORT_SYMBOL(eth_type_trans);
> +
> +static int eth_mac_addr(struct net_device *dev, void *p)
> +{
> + struct sockaddr *addr=p;
> + if (netif_running(dev))
> + return -EBUSY;
> + memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
> + return 0;
> +}
> +
> +static int eth_change_mtu(struct net_device *dev, int new_mtu)
> +{
> + if ((new_mtu < 68) || (new_mtu > 1500))
> + return -EINVAL;
> + dev->mtu = new_mtu;
> + return 0;
> +}
> +
> +/*
> + * Fill in the fields of the device structure with ethernet-generic values.
> + */
> +void ether_setup(struct net_device *dev)
> +{
> + dev->change_mtu = eth_change_mtu;
> + dev->hard_header = eth_header;
> + dev->rebuild_header = eth_rebuild_header;
> + dev->set_mac_address = eth_mac_addr;
> + dev->hard_header_cache = eth_header_cache;
> + dev->header_cache_update= eth_header_cache_update;
> + dev->hard_header_parse = eth_header_parse;
> +
> + dev->type = ARPHRD_ETHER;
> + dev->hard_header_len = ETH_HLEN;
> + dev->mtu = 1500; /* eth_mtu */
> + dev->addr_len = ETH_ALEN;
> + dev->tx_queue_len = 1000; /* Ethernet wants good queues */
> + dev->flags = IFF_BROADCAST|IFF_MULTICAST;
> +
> + memset(dev->broadcast,0xFF, ETH_ALEN);
> +
> +}
> +EXPORT_SYMBOL(ether_setup);
> +
> +/**
> + * alloc_etherdev - Allocates and sets up an ethernet device
> + * @sizeof_priv: Size of additional driver-private structure to be allocated
> + * for this ethernet device
> + *
> + * Fill in the fields of the device structure with ethernet-generic
> + * values. Basically does everything except registering the device.
> + *
> + * Constructs a new net device, complete with a private data area of
> + * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
> + * this private data area.
> + */
> +
> +struct net_device *alloc_etherdev(int sizeof_priv)
> +{
> + return alloc_netdev(sizeof_priv, "eth%d", ether_setup);
> +}
> +EXPORT_SYMBOL(alloc_etherdev);
> --- /dev/null 2004-08-20 00:05:11.000000000 +0200
> +++ b/net/appletalk/dev.c 2004-11-01 13:49:02.111094544 +0100
> @@ -0,0 +1,43 @@
> +/*
> + * Moved here from drivers/net/net_init.c, which is:
> + * Written 1993,1994,1995 by Donald Becker.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/if_arp.h>
> +#include <linux/if_ltalk.h>
> +
> +static int ltalk_change_mtu(struct net_device *dev, int mtu)
> +{
> + return -EINVAL;
> +}
> +
> +static int ltalk_mac_addr(struct net_device *dev, void *addr)
> +{
> + return -EINVAL;
> +}
> +
> +void ltalk_setup(struct net_device *dev)
> +{
> + /* Fill in the fields of the device structure with localtalk-generic
> values. */
> +
> + dev->change_mtu = ltalk_change_mtu;
> + dev->hard_header = NULL;
> + dev->rebuild_header = NULL;
> + dev->set_mac_address = ltalk_mac_addr;
> + dev->hard_header_cache = NULL;
> + dev->header_cache_update= NULL;
> +
> + dev->type = ARPHRD_LOCALTLK;
> + dev->hard_header_len = LTALK_HLEN;
> + dev->mtu = LTALK_MTU;
> + dev->addr_len = LTALK_ALEN;
> + dev->tx_queue_len = 10;
> +
> + dev->broadcast[0] = 0xFF;
> +
> + dev->flags = IFF_BROADCAST|IFF_MULTICAST|IFF_NOARP;
> +}
> +EXPORT_SYMBOL(ltalk_setup);
>
---end quoted text---
|