Linux version 2.6.8-rc2 (root@chimpanzee) (gcc version 3.3.4 (Debian 1:3.3.4-3)) #1 SMP Tue Jul 27 21:30:44 MSD 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 767MB LOWMEM available. found SMP MP-table at 000fb170 On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192496 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fc5b0 ACPI: RSDT (v001 AMIINT 0x00000010 MSFT 0x00000099) @ 0x2fff0000 ACPI: FADT (v001 AMIINT 0x00000011 MSFT 0x00000099) @ 0x2fff0030 ACPI: MADT (v001 AMIINT 0x00000009 MSFT 0x00000099) @ 0x2fff00b0 ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ5 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux ro root=90b devfs=nomount Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 864.157 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 774636k/786368k available (2372k kernel code, 10984k reserved, 1003k data, 192k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1708.03 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 06 per-CPU timeslice cutoff: 730.77 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000084 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1724.41 BogoMIPS CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3432.44 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 863.0476 MHz. ..... host bus clock speed is 132.0842 MHz. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0: online domain 0: span 3 groups: 1 2 CPU1: online domain 0: span 3 groups: 2 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20040326 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:............................................................................................................. Table [DSDT](id F004) - 450 Objects with 35 Devices 109 Methods 31 Regions ACPI Namespace successfully loaded at root c049fcfc evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000000820 on int 5 evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 4 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:................................................................................................ Initialized 31/31 Regions 19/19 Fields 31/31 Buffers 15/15 Packages (459 nodes) Executing all Device _STA and_INI methods:...................................... 38 Devices found containing: 38 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f6a10 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x58e4, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 1 0 1 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 1 1 0 1 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 003 03 1 1 0 1 0 1 1 B1 11 003 03 1 1 0 1 0 1 1 A9 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 050 00 1 0 0 0 0 0 2 40 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 .................................... done. IA-32 Microcode Update Driver: v1.14 Starting balanced_irq VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). NTFS driver 2.1.15 [Flags: R/W]. Initializing Cryptographic API PCI: Enabling Via external APIC routing ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 16M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport_pc: Via 686A parallel port: io=0x378 Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize e100: Intel(R) PRO/100 Network Driver, 3.0.18 e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 e100: eth0: e100_probe: addr 0xdbfed000, irq 16, MAC addr 00:D0:B7:3C:EC:78 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17 e100: eth1: e100_probe: addr 0xdbfee000, irq 17, MAC addr 00:D0:B7:3C:EC:7A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: ST340014A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: ST340014A, ATA DISK drive hdd: IBM-DTLA-307030, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(66) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > hdc: max request size: 1024KiB hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(66) /dev/ide/host0/bus1/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > hdd: max request size: 128KiB hdd: 60036480 sectors (30738 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(66) /dev/ide/host0/bus1/target1/lun0: p1 mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1728.000 MB/sec raid5: using function: pIII_sse (1728.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 ACPI: (supports S0 S1 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 3 devices found md: Autodetecting RAID arrays. md: autorun ... md: considering hdd1 ... md: adding hdd1 ... md: adding hdc7 ... md: hdc6 has different UUID to hdd1 md: hdc5 has different UUID to hdd1 md: hdc3 has different UUID to hdd1 md: hdc1 has different UUID to hdd1 md: adding hda7 ... md: hda6 has different UUID to hdd1 md: hda5 has different UUID to hdd1 md: hda3 has different UUID to hdd1 md: hda2 has different UUID to hdd1 md: hda1 has different UUID to hdd1 md: created md20 md: bind md: bind md: bind md: running: md: considering hdc6 ... md: adding hdc6 ... md: hdc5 has different UUID to hdc6 md: hdc3 has different UUID to hdc6 md: hdc1 has different UUID to hdc6 md: adding hda6 ... md: hda5 has different UUID to hdc6 md: hda3 has different UUID to hdc6 md: hda2 has different UUID to hdc6 md: hda1 has different UUID to hdc6 md: created md16 md: bind md: bind md: running: raid1: raid set md16 active with 2 out of 2 mirrors md: considering hdc5 ... md: adding hdc5 ... md: hdc3 has different UUID to hdc5 md: hdc1 has different UUID to hdc5 md: adding hda5 ... md: hda3 has different UUID to hdc5 md: hda2 has different UUID to hdc5 md: hda1 has different UUID to hdc5 md: created md15 md: bind md: bind md: running: raid1: raid set md15 active with 2 out of 2 mirrors md: considering hdc3 ... md: adding hdc3 ... md: hdc1 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: hda1 has different UUID to hdc3 md: created md13 md: bind md: bind md: running: raid1: raid set md13 active with 2 out of 2 mirrors md: considering hdc1 ... md: adding hdc1 ... md: hda2 has different UUID to hdc1 md: adding hda1 ... md: created md11 md: bind md: bind md: running: raid1: raid set md11 active with 2 out of 2 mirrors md: considering hda2 ... md: adding hda2 ... md: created md12 md: bind md: running: raid1: raid set md12 active with 1 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 192k freed Adding 995896k swap on /dev/md13. Priority:-1 extents:1 EXT3 FS on md11, internal journal SCSI subsystem initialized i2c /dev entries driver kjournald starting. Commit interval 5 seconds EXT3 FS on md15, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hdc8: found reiserfs format "3.6" with standard journal ReiserFS: hdc8: using ordered data mode ReiserFS: hdc8: journal params: device hdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc8: checking transaction log (hdc8) ReiserFS: hdc8: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on md16, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md12, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md20, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (6143 buckets, 49144 max) - 300 bytes per conntrack USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:07.2: irq 9, io base 0000d000 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:07.3: irq 9, io base 0000d400 uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex IPv4 over IPv4 tunneling driver e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex