On Wed, Jul 21, 2004 at 12:56:22PM +0200, Francois Romieu wrote:
> Vladimir B. Savkin <master@xxxxxxxxxxxxxx> :
> > My realtek-8169 based NIC doesn't work with 2.6.
> > Kernel versions tried: 2.6.7, 2.6.7-mm7.
> > Works OK with 2.4.26.
> [...]
> > Is there any other info I can supply you with to debug this problem?
>
> - dmesg once the card is up/stopped (please provide complete dmesg from
> boot as it usually gets truncated and misses the compiler info)
Attached as dmesg.boot.
No additional messages after card is stopped.
(I use vlans, but can reproduce the problem without them).
> - ifconfig output once the card is stopped
Attached as ifconfig.eth1
Look, seems like the card stops after 64 packets transmitted -
I checked this several times!
> - lspci -vx
Attached as lspci-vx.
>
> Did you try 2.6.6 or previous kernel in the 2.6.x serie ?
Just checked - 2.6.6 couldn't boot on this machine -
hda: lost interrupt
>
> Please redirect traffic to netdev@xxxxxxxxxxxx
>
> --
> Ueimor
>
~
:wq
With best regards,
Vladimir Savkin.
dmesg.boot
Description: Text document
lspci-vx
Description: Text document
ifconfig.eth1.2
Description: ifconfig.eth1
|