Linux version 2.6.2-rc1 (root@sahbi) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #3 Fri Jan 23 09:40:12 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data) BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f55d0 ACPI: RSDT (v001 A M I OEMRSDT 0x12000302 MSFT 0x00000097) @ 0x3ffd0000 ACPI: FADT (v001 A M I OEMFACP 0x12000302 MSFT 0x00000097) @ 0x3ffd0200 ACPI: MADT (v001 A M I OEMAPIC 0x12000302 MSFT 0x00000097) @ 0x3ffd0390 ACPI: OEMB (v001 A M I AMI_OEM 0x12000302 MSFT 0x00000097) @ 0x3ffdf040 ACPI: DSDT (v001 1ABFS 1ABFS001 0x00000001 INTL 0x02002026) @ 0x00000000 Building zonelist for node : 0 Kernel command line: root=/dev/hda5 vga=791 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2800.839 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 904668k/917504k available (1875k kernel code, 12052k reserved, 714k data, 132k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5537.79 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=1) Enabling SiS 96x SMBus. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 11) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0xc0000000, mapped to 0xf880a000, size 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:e590 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Machine check exception polling timer started. devfs: v1.22 (20021013) Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). Initializing Cryptographic API ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Thermal Zone [THRM] (75 C) Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: HTS726060M9AT00, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: QSI CD-RW/DVD-ROM SBW242U, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > Console: switching to colour frame buffer device 128x48 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 5.9 180 degree mounted touchpad Sensor: 35 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio2 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 device-mapper: 4.0.0-ioctl (2003-06-04) initialised: dm@xxxxxxxxxxxxxx NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. PM: Resume from disk failed. found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda5) for (hda5) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 132k freed Adding 1004052k swap on /dev/hda3. Priority:-1 extents:1 cdrom: : unknown mrw mode page hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 nvidia: no version magic, tainting kernel. nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003 cdrom: open failed. found reiserfs format "3.6" with standard journal Reiserfs journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (dm-2) for (dm-2) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (dm-3) for (dm-3) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (dm-0) for (dm-0) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (dm-4) for (dm-4) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (dm-1) for (dm-1) Using r5 hash to sort names NTFS driver 2.1.6 [Flags: R/O MODULE]. NTFS volume version 3.1. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub Real Time Clock Driver v1.12 request_module: failed /sbin/modprobe -- snd-card-0. error = 256 intel8x0: clocking to 48000 r8169 Gigabit Ethernet driver 1.2 loaded r8169: PCI device 0000:00:0a.0: unknown chip version, assuming RTL-8169 r8169: PCI device 0000:00:0a.0: TxConfig = 0x4000000 eth0: Identified chip type is 'RTL-8169'. eth0: RealTek RTL8169 Gigabit Ethernet at 0xf9b1ec00, 00:03:0d:10:45:3c, IRQ 3 eth0: Auto-negotiation Enabled. eth0: 100Mbps Full-duplex operation. Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:00:09.0 [1584:3005] Yenta: ISA IRQ mask 0x02b0, PCI irq 10 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:09.1 [1584:3005] Yenta: ISA IRQ mask 0x02b0, PCI irq 10 Socket status: 30000006 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: irq 11, pci mem f9f20000 ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: irq 11, pci mem f9f53000 ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: irq 10, pci mem f9f55000 ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: irq 11, pci mem f9f57000 ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci1394: $Rev: 1097 $ Ben Collins ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[dffe9000-dffe97ff] Max Packet=[2048] Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected SiS 648 chipset agpgart: Maximum main memory to use for agp memory: 816M agpgart: AGP aperture is 256M @ 0xe0000000 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d537660266c] hub 2-0:1.0: new USB device on port 1, assigned address 2 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-1 hub 3-0:1.0: new USB device on port 2, assigned address 2 input: USB HID v1.10 Mouse [Cypress Semiconductor USB Multi Remote Controller] on usb-0000:00:03.1-2 HID device not claimed by input or hiddev hid: probe of 3-2:1.1 failed with error -5 parport0: PC-style at 0x278 (0x678) [PCSPP,TRISTATE,EPP] parport0: irq 5 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). NET: Registered protocol family 10 Disabled Privacy Extensions on device c0353180(lo) IPv6 over IPv4 tunneling driver 0: NVRM: not using NVAGP, AGPGART is loaded!! atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). eth0: no IPv6 routers present pktgen.c: v1.3: Packet Generator for packet performance testing. NETDEV WATCHDOG: eth0: transmit timed out