Linux version 2.4.1-pre2 (root@gw2-snowman) (gcc version 2.95.3 20010111 (prerelease)) #1 SMP Mon Jan 15 12:59:07 EST 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 000000000feec000 @ 0000000000100000 (usable) BIOS-e820: 0000000000003000 @ 000000000ffec000 (ACPI data) BIOS-e820: 0000000000010000 @ 000000000ffef000 (reserved) BIOS-e820: 0000000000001000 @ 000000000ffff000 (ACPI NVS) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 4096 bytes. On node 0 totalpages: 65516 zone(0): 4096 pages. zone(1): 61420 pages. zone(2): 0 pages. mapped APIC to ffffe000 (01444000) Kernel command line: auto BOOT_IMAGE=Linux ro root=301 Initializing CPU#0 Detected 655.851 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1307.44 BogoMIPS Memory: 255292k/262064k available (1062k kernel code, 6384k reserved, 429k data, 200k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU0: AMD Athlon(tm) Processor stepping 00 per-CPU timeslice cutoff: 182.95 usecs. SMP motherboard not detected. Using dummy APIC emulation. Setting commenced=1, go go go PCI: PCI BIOS revision 2.10 entry at 0xf1010, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:04.0 isapnp: Scanning for Pnp cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket DMI 2.3 present. 49 structures occupying 1371 bytes. DMI table at 0x000F27D0. BIOS Vendor: Award Software, Inc. BIOS Version: ASUS A7V ACPI BIOS Revision 1003 BIOS Release: 07/21/2000 System Vendor: System Manufacturer. Product Name: System Name. Version System Version. Serial Number SYS-1234567890. Board Vendor: ASUSTeK Computer INC.. Board Name: . Board Version: REV 1.xx. Asset Tag: Asset-1234567890. Starting kswapd v1.8 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 21 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio PDC20265: IDE controller on PCI bus 00 dev 88 PCI: Found IRQ 10 for device 00:11.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later ide2: BM-DMA at 0x8800-0x8807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x8808-0x880f, BIOS settings: hdg:pio, hdh:pio hda: FUJITSU M1638TAU, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 5023680 sectors (2572 MB) w/128KiB Cache, CHS=622/128/63, DMA Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d PCI: Found IRQ 5 for device 00:0a.0 3c59x.c:LK1.1.12 06 Jan 2000 Donald Becker and others. http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $ See Documentation/networking/vortex.txt eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa400, 00:50:04:63:b2:e1, IRQ 5 product code 'TN' rev 00.9 date 02-06-99 8K byte-wide RAM 5:3 Rx:Tx split, 10baseT interface. Enabling bus-master transmits and whole-frame receives. PPP generic driver version 2.4.1 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack (2047 buckets, 16376 max) ip_tables: (c)2000 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 200k freed Adding Swap: 249976k swap-space (priority -1) eth0: using default media 10baseT