From owner-inventor@oss.sgi.com Fri Jan 5 09:39:13 2001 Received: by oss.sgi.com id ; Fri, 5 Jan 2001 09:38:53 -0800 Received: from carlcox.iway.fr ([194.98.0.128]:7720 "EHLO CarlCox.iway.fr") by oss.sgi.com with ESMTP id ; Fri, 5 Jan 2001 09:38:39 -0800 Received: from pcdefense2 ([194.98.32.173]) by CarlCox.iway.fr (8.9.3/8.8.7) with SMTP id SAA2869381 for ; Fri, 5 Jan 2001 18:38:34 +0100 (MET) Message-ID: <001f01c0773f$1fdb88e0$5d0aa8c0@pcdefense2> From: "Fred Rouas" To: Subject: OIV on SunOS Date: Fri, 5 Jan 2001 18:44:16 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-Mimeole: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing I've seen in the OIV Readme.fisrt that the source could be downloaded with fonts pre-compiled for SunOS. Does it mean that the downloadable version of OIV have been ported to SunOS ? If not, would this port allowed ? easy ? From owner-inventor@oss.sgi.com Tue Jan 9 05:12:05 2001 Received: by oss.sgi.com id ; Tue, 9 Jan 2001 05:11:46 -0800 Received: from access-178.93.rev.fr.colt.net ([213.41.93.178]:16093 "EHLO nyctalop.visiospace.com") by oss.sgi.com with ESMTP id ; Tue, 9 Jan 2001 05:11:35 -0800 Received: from visiospace.com ([10.10.6.65]) by nyctalop.visiospace.com (8.10.2/8.10.2/SuSE Linux 8.10.0-0.3) with ESMTP id f09ECpY20830 for ; Tue, 9 Jan 2001 15:12:51 +0100 X-Authentication-Warning: nyctalop.visiospace.com: Host [10.10.6.65] claimed to be visiospace.com Message-ID: <3A5B1CE2.A9B391D6@visiospace.com> Date: Tue, 09 Jan 2001 15:14:58 +0100 From: Cyril ZEKSER X-Mailer: Mozilla 4.76 [fr] (X11; U; Linux 2.2.16-22smp i686) X-Accept-Language: fr MIME-Version: 1.0 Newsgroups: comp.graphics.api.inventor To: info-inventor@oss.sgi.com Subject: Fonts once more... Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi all, I still haven't found any solution of my Font problem. eg, I can't display any font on my screen with IV primitives. BTW? I've upgraded my video card from G450 to nvidia GeoForce 2, freeing any Mesa Resources. I've checked that : 1. libFL is properly installed (libFL.a) and linked with my apps. 2. linkType1.sh was run as root, 2b. the links are correctly made. 3. the fonts are correctly displayed with t1lib tools, such as gfontview But 2 points are still there : 1. I can't display any text. 2. I can't compile on my system, but the binary RPM install is OK. I don't know what to do next, since I really need text displayed for my demo next month ! Any other clue ? Cyril ZEKSER From owner-inventor@oss.sgi.com Tue Jan 9 05:24:06 2001 Received: by oss.sgi.com id ; Tue, 9 Jan 2001 05:23:45 -0800 Received: from access-178.93.rev.fr.colt.net ([213.41.93.178]:39649 "EHLO nyctalop.visiospace.com") by oss.sgi.com with ESMTP id ; Tue, 9 Jan 2001 05:23:13 -0800 Received: from visiospace.com ([10.10.6.65]) by nyctalop.visiospace.com (8.10.2/8.10.2/SuSE Linux 8.10.0-0.3) with ESMTP id f09EOTY20900 for ; Tue, 9 Jan 2001 15:24:29 +0100 X-Authentication-Warning: nyctalop.visiospace.com: Host [10.10.6.65] claimed to be visiospace.com Message-ID: <3A5B1F9C.8AC9BCAB@visiospace.com> Date: Tue, 09 Jan 2001 15:26:37 +0100 From: Cyril ZEKSER X-Mailer: Mozilla 4.76 [fr] (X11; U; Linux 2.2.16-22smp i686) X-Accept-Language: fr MIME-Version: 1.0 To: info-inventor@oss.sgi.com Subject: Compiling problem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Re-Hi all, Now, I've tried to compile once again, and the process craches at the compiling of SoElements.c++ with the following error : (I've launched gmake install from root) //----------------------------------------------------------------- In file included from SoElements.c++:78: SoGLCacheContextElement.c++: In method `SoGLDisplayList::SoGLDisplayList (SoState *, SoGLDisplayList::Type, int)': SoGLCacheContextElement.c++:440: `glGenTexturesEXT' undeclared (first use this function) SoGLCacheContextElement.c++:440: (Each undeclared identifier is reported only once for each function it appears in.) SoGLCacheContextElement.c++: In method `void SoGLDisplayList::open (SoState *, int)': SoGLCacheContextElement.c++:505: `glBindTextureEXT' undeclared (first use this function) In file included from SoElements.c++:78: SoGLCacheContextElement.c++: In method `SoGLDisplayList::~SoGLDisplayList ()': SoGLCacheContextElement.c++:583: `glDeleteTexturesEXT' undeclared (first use this function) gmake[5]: *** [SoElements.o] Erreur 1 //------------------------------------------------------------------- I don't know what to do with that... anyone can help me, please ? Cyril ZEKSER From owner-inventor@oss.sgi.com Tue Jan 9 07:52:07 2001 Received: by oss.sgi.com id ; Tue, 9 Jan 2001 07:51:56 -0800 Received: from jalon.able.es ([212.97.163.2]:65168 "EHLO jalon.able.es") by oss.sgi.com with ESMTP id ; Tue, 9 Jan 2001 07:51:47 -0800 Received: from correo.able.es ([212.97.169.40]) by jalon.able.es (Netscape Messaging Server 4.15) with SMTP id G6WK1H00.923; Tue, 9 Jan 2001 16:51:17 +0100 Date: Tue, 9 Jan 2001 16:51:13 +0100 From: "J . A . Magallon" To: Cyril ZEKSER Cc: info-inventor@oss.sgi.com Subject: Re: Compiling problem Message-ID: <20010109165113.A9148@werewolf.able.es> References: <3A5B1F9C.8AC9BCAB@visiospace.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: <3A5B1F9C.8AC9BCAB@visiospace.com>; from czekser@visiospace.com on Tue, Jan 09, 2001 at 15:26:37 +0100 X-Mailer: Balsa 1.0.1 Content-Length: 1640 Lines: 44 Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing That is problem with newer gl versions. Update your sources to the latest available, I think there this is yet corrected. On 2001.01.09 Cyril ZEKSER wrote: > > Re-Hi all, > > Now, I've tried to compile once again, and the process craches at the > compiling of SoElements.c++ with the following error : > (I've launched gmake install from root) > > //----------------------------------------------------------------- > In file included from SoElements.c++:78: > SoGLCacheContextElement.c++: In method > `SoGLDisplayList::SoGLDisplayList (SoState *, SoGLDisplayList::Type, > int)': > SoGLCacheContextElement.c++:440: `glGenTexturesEXT' undeclared (first > use this function) > SoGLCacheContextElement.c++:440: (Each undeclared identifier is > reported only once for each function it appears in.) > SoGLCacheContextElement.c++: In method `void SoGLDisplayList::open > (SoState *, int)': > SoGLCacheContextElement.c++:505: `glBindTextureEXT' undeclared (first > use this function) > In file included from SoElements.c++:78: > SoGLCacheContextElement.c++: In method > `SoGLDisplayList::~SoGLDisplayList ()': > SoGLCacheContextElement.c++:583: `glDeleteTexturesEXT' undeclared > (first use this function) > gmake[5]: *** [SoElements.o] Erreur 1 > //------------------------------------------------------------------- > > I don't know what to do with that... > > anyone can help me, please ? > > Cyril ZEKSER > -- J.A. Magallon $> cd pub mailto:jamagallon@able.es $> more beer Linux werewolf 2.4.0-ac4 #1 SMP Mon Jan 8 22:10:06 CET 2001 i686 From owner-inventor@oss.sgi.com Mon Jan 15 10:30:34 2001 Received: by oss.sgi.com id ; Mon, 15 Jan 2001 10:30:24 -0800 Received: from [132.254.232.35] ([132.254.232.35]:32735 "EHLO convert rfc822-to-8bit webmail.rzp.itesm.mx") by oss.sgi.com with ESMTP id ; Mon, 15 Jan 2001 10:30:08 -0800 Received: by webmail.rzp.itesm.mx (5.1.050) id 3A34F6700002E611; Mon, 15 Jan 2001 12:30:20 -0600 Message-ID: <3A0A36B800005B67@webmail.rzp.itesm.mx> Date: Mon, 15 Jan 2001 12:30:19 -0600 From: "Gildardo Sanchez Ante" Subject: GLw Library To: info-inventor@oss.sgi.com MIME-Version: 1.0 Importance: Normal Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi! I am trying to install OpenInventor on a PC with Mandrake 7.2, however, the process stops because it cannot find the GLw library. Where can i get it? make[4]: Entering directory `/usr/local/inventor/apps/samples/widgets' /usr/bin/g++ -L/usr/X11R6/lib -L/usr/lib componentTest.o libInventorWidget.a -lInventor -lInventorXt -lGLw -o componentTest /usr/bin/ld: cannot find -lGLw collect2: ld returned 1 exit status make[4]: *** [componentTest] Error 1 make[4]: Leaving directory `/usr/local/inventor/apps/samples/widgets' -- Gildardo From owner-inventor@oss.sgi.com Mon Jan 15 10:59:34 2001 Received: by oss.sgi.com id ; Mon, 15 Jan 2001 10:59:25 -0800 Received: from jalon.able.es ([212.97.163.2]:59781 "EHLO jalon.able.es") by oss.sgi.com with ESMTP id ; Mon, 15 Jan 2001 10:59:04 -0800 Received: from correo.able.es ([212.97.169.40]) by jalon.able.es (Netscape Messaging Server 4.15) with SMTP id G77WPY00.2F5; Mon, 15 Jan 2001 19:58:46 +0100 Date: Mon, 15 Jan 2001 19:58:36 +0100 From: "J . A . Magallon" To: Gildardo Sanchez Ante Cc: info-inventor@oss.sgi.com Subject: Re: GLw Library Message-ID: <20010115195836.A707@werewolf.able.es> References: <3A0A36B800005B67@webmail.rzp.itesm.mx> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: <3A0A36B800005B67@webmail.rzp.itesm.mx>; from gsanchez@campus.gda.itesm.mx on Mon, Jan 15, 2001 at 19:30:19 +0100 X-Mailer: Balsa 1.0.1 Content-Length: 509 Lines: 17 Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing On 2001.01.15 Gildardo Sanchez Ante wrote: > Hi! > > I am trying to install OpenInventor on a PC with Mandrake 7.2, however, > the process stops because it cannot find the GLw library. > > Where can i get it? > If you use XFree4.0.x, it should be in XFree86-devel-4.0.x..... -- J.A. Magallon $> cd pub mailto:jamagallon@able.es $> more beer Linux werewolf 2.4.0-ac9 #2 SMP Sun Jan 14 01:46:07 CET 2001 i686 From owner-inventor@oss.sgi.com Mon Jan 15 11:03:05 2001 Received: by oss.sgi.com id ; Mon, 15 Jan 2001 11:02:44 -0800 Received: from beton.vrvis.at ([194.152.163.92]:29188 "EHLO beton.vrvis.at") by oss.sgi.com with ESMTP id ; Mon, 15 Jan 2001 11:02:33 -0800 Received: from localhost.localdomain (IDENT:root@chello212186107055.14.tuwien.teleweb.at [212.186.107.55]) by beton.vrvis.at (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id UAA01870; Mon, 15 Jan 2001 20:02:20 +0100 Received: (from honza@localhost) by localhost.localdomain (8.9.3/8.9.3) id UAA00907; Mon, 15 Jan 2001 20:02:16 +0100 Date: Mon, 15 Jan 2001 20:02:15 +0100 From: Jan Prikryl To: Gildardo Sanchez Ante Cc: info-inventor@oss.sgi.com Subject: Re: GLw Library Message-ID: <20010115200215.A818@erwin.telekabel.at> References: <3A0A36B800005B67@webmail.rzp.itesm.mx> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A0A36B800005B67@webmail.rzp.itesm.mx>; from gsanchez@campus.gda.itesm.mx on Po, led 15, 2001 at 12:30:19 -0600 Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Quoting Gildardo Sanchez Ante (gsanchez@campus.gda.itesm.mx): > I am trying to install OpenInventor on a PC with Mandrake 7.2, however, > the process stops because it cannot find the GLw library. GLw is a part of every Mesa tar file, somewhere in sgi demos. -- jan --------------------+------------------------------------------------------ Jan Prikryl | vr|vis center for virtual reality and visualisation | http://www.vrvis.at --------------------+------------------------------------------------------ From owner-inventor@oss.sgi.com Tue Jan 16 17:37:19 2001 Received: by oss.sgi.com id ; Tue, 16 Jan 2001 17:36:59 -0800 Received: from [132.254.232.35] ([132.254.232.35]:56540 "EHLO webmail.rzp.itesm.mx") by oss.sgi.com with ESMTP id ; Tue, 16 Jan 2001 17:36:29 -0800 Received: from campus.gda.itesm.mx (132.254.48.70) by webmail.rzp.itesm.mx (5.1.050) id 3A34F67000033290; Tue, 16 Jan 2001 19:36:43 -0600 Message-ID: <3A64F690.70CDA1C5@campus.gda.itesm.mx> Date: Tue, 16 Jan 2001 19:34:08 -0600 From: Gildardo Sanchez-Ante Organization: ITESM Campus Guadalajara X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.17-21mdk i686) X-Accept-Language: en MIME-Version: 1.0 To: info-inventor@oss.sgi.com Subject: Compiling problem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi! I compiled and installed SGI's Open Inventor on Mandrake7.2, and basically everything seems to be working great, except that when i compile my codes and i run them i get a Segmentation Fault. What seems weird to me is that i copied one of the files from the examples included in the distribution (HelloCone.c++ to mention one). I compiled it and linked it and it didn't worked. Since the GNUmakefile on /apps/examples/Mentor/C++ prints the command line while compiling, I took it from there and did the compilation manually, something like: /usr/bin/g++ -I/usr/X11R6/include -I. -I/usr/local/lib/database/include -I/usr/local/lib/interaction/include -I/usr/local/lib/nodekits/include -I/usr/local/libSoXt/include -fPIC -O -c HelloCone.c++ However, the .o file that i got has 3824 bytes, while the one generated automatically has 3680 bytes. If i copy the .o file generate automatically and link, everything works, so, the problem is when compiling. Is there any option that i'm forgetting? Thanks! -- Gildardo From owner-inventor@oss.sgi.com Wed Jan 17 01:58:21 2001 Received: by oss.sgi.com id ; Wed, 17 Jan 2001 01:58:11 -0800 Received: from access-178.93.rev.fr.colt.net ([213.41.93.178]:4191 "EHLO nyctalop.visiospace.com") by oss.sgi.com with ESMTP id ; Wed, 17 Jan 2001 01:57:47 -0800 Received: from visiospace.com ([10.10.6.65]) by nyctalop.visiospace.com (8.10.2/8.10.2/SuSE Linux 8.10.0-0.3) with ESMTP id f0HAwRY18947 for ; Wed, 17 Jan 2001 11:58:27 +0100 X-Authentication-Warning: nyctalop.visiospace.com: Host [10.10.6.65] claimed to be visiospace.com Message-ID: <3A656DC4.A45184C9@visiospace.com> Date: Wed, 17 Jan 2001 11:02:44 +0100 From: Cyril ZEKSER X-Mailer: Mozilla 4.76 [fr] (X11; U; Linux 2.2.16-22smp i686) X-Accept-Language: fr MIME-Version: 1.0 Newsgroups: comp.graphics.api.inventor To: info-inventor@oss.sgi.com Subject: Importers or exporters Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi all, I'm trying to find some tools that can make IV files from 3DS, OBJ or DXF format. Is there any tools in the Web that you could give me the URL to ? BTW, if there are C++-importers for these file formats, I'll prefer using that. Cyril ZEKSER From owner-inventor@oss.sgi.com Wed Jan 17 05:23:02 2001 Received: by oss.sgi.com id ; Wed, 17 Jan 2001 05:22:52 -0800 Received: from trh.sim.no ([195.1.220.136]:31985 "HELO sim.no") by oss.sgi.com with SMTP id ; Wed, 17 Jan 2001 05:22:34 -0800 Received: (qmail 911 invoked by uid 2000); 17 Jan 2001 13:22:31 -0000 Date: Wed, 17 Jan 2001 14:22:31 +0100 From: "Lars J. Aas" To: Cyril ZEKSER Cc: info-inventor@oss.sgi.com Subject: Re: Importers or exporters Message-ID: <20010117142230.A820@sim.no> References: <3A656DC4.A45184C9@visiospace.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A656DC4.A45184C9@visiospace.com>; from czekser@visiospace.com on Wed, Jan 17, 2001 at 11:02:44AM +0100 Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing On Wed, Jan 17, 2001 at 11:02:44AM +0100, Cyril ZEKSER wrote: : I'm trying to find some tools that can make IV files from 3DS, OBJ or : DXF format. : Is there any tools in the Web that you could give me the URL to ? You can check out the Dime (DXF Import, Manipulation, and Export) library at http://www.coin3d.org/. It doesn't produce an Inventor scene graph directly, but there is an example program that creates a VRML 1.0 file for you. Lars J -- Innovation is one percent inspiration and ninetynine percent perspiration, and in my case; twice that... -- Norville Barnes, `The Hudsucker Proxy' From owner-inventor@oss.sgi.com Wed Jan 17 06:13:22 2001 Received: by oss.sgi.com id ; Wed, 17 Jan 2001 06:13:12 -0800 Received: from access-178.93.rev.fr.colt.net ([213.41.93.178]:43191 "EHLO nyctalop.visiospace.com") by oss.sgi.com with ESMTP id ; Wed, 17 Jan 2001 06:12:54 -0800 Received: from visiospace.com ([10.10.6.65]) by nyctalop.visiospace.com (8.10.2/8.10.2/SuSE Linux 8.10.0-0.3) with ESMTP id f0HFDWY19682 for ; Wed, 17 Jan 2001 16:13:32 +0100 X-Authentication-Warning: nyctalop.visiospace.com: Host [10.10.6.65] claimed to be visiospace.com Message-ID: <3A65A999.C01DF6A5@visiospace.com> Date: Wed, 17 Jan 2001 15:18:01 +0100 From: Cyril ZEKSER X-Mailer: Mozilla 4.76 [fr] (X11; U; Linux 2.2.16-22smp i686) X-Accept-Language: fr MIME-Version: 1.0 Newsgroups: comp.graphics.api.inventor To: info-inventor@oss.sgi.com Subject: Re: GLw Library References: <3A0A36B800005B67@webmail.rzp.itesm.mx> <20010115200215.A818@erwin.telekabel.at> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Jan Prikryl a écrit : > Quoting Gildardo Sanchez Ante (gsanchez@campus.gda.itesm.mx): > > > I am trying to install OpenInventor on a PC with Mandrake 7.2, however, > > the process stops because it cannot find the GLw library. > > GLw is a part of every Mesa tar file, somewhere in sgi demos. I've checked every version of Mesa, and I haven't found any pre-compiled libGLw.a. I can't compile Mesa files since i've a nvidia GeForce 2 Ultra, which is not compatable with Mesa !! Can anybody send me this filen please ? > > > -- jan > > --------------------+------------------------------------------------------ > Jan Prikryl | vr|vis center for virtual reality and visualisation > | http://www.vrvis.at > --------------------+------------------------------------------------------ From owner-inventor@oss.sgi.com Wed Jan 17 06:53:41 2001 Received: by oss.sgi.com id ; Wed, 17 Jan 2001 06:53:31 -0800 Received: from ics.com ([216.112.183.3]:47886 "EHLO ics.com") by oss.sgi.com with ESMTP id ; Wed, 17 Jan 2001 06:53:15 -0800 Received: from ics.com (Ottawa-ppp-198366.sympatico.ca [209.226.116.143]) by ics.com (8.9.0.Beta5/8.9.0.Beta5) with ESMTP id JAA24464 Wed, 17 Jan 2001 09:53:12 -0500 (EST) Message-ID: <3A65B1AC.38A7ED00@ics.com> Date: Wed, 17 Jan 2001 09:52:28 -0500 From: Robert Hartley Organization: ICS X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en-US, en, en-GB, es-ES, ru MIME-Version: 1.0 To: info-inventor@oss.sgi.com Subject: Re: GLw Library References: <3A0A36B800005B67@webmail.rzp.itesm.mx> <20010115200215.A818@erwin.telekabel.at> <3A65A999.C01DF6A5@visiospace.com> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hello, I used the pre-compiled Inventor tar file to install it on Mandrake v7.2 It works fine. If you want to rebuild from source, then look in the Mesa sources where you will find two directories for Widgets. One of them is the SGI version, the other is the Mesa version. Choose one, compile it, then move the library somewhere sensible. I have been doing this for years and it works, but if you have problems, let me know, Good luck! Rob Cyril ZEKSER wrote: > Jan Prikryl a écrit : > > > Quoting Gildardo Sanchez Ante (gsanchez@campus.gda.itesm.mx): > > > > > I am trying to install OpenInventor on a PC with Mandrake 7.2, however, > > > the process stops because it cannot find the GLw library. > > > > GLw is a part of every Mesa tar file, somewhere in sgi demos. > > I've checked every version of Mesa, and I haven't found any pre-compiled > libGLw.a. > I can't compile Mesa files since i've a nvidia GeForce 2 Ultra, which is not > compatable with Mesa !! > > Can anybody send me this filen please ? -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= = Robert Hartley Mail: 201 Broadway = = Central Region Systems Engineer Cambridge, MA 02139 = = Integrated Computer Email: rhartley@ics.com = = Solutions, Inc. Web Site: www.ics.com = = Tech Support: support@ics.com Phone: 800-800-4271 = =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Visit the MotifZone (www.motifzone.org) for info on Motif! From owner-inventor@oss.sgi.com Wed Jan 17 06:57:01 2001 Received: by oss.sgi.com id ; Wed, 17 Jan 2001 06:56:51 -0800 Received: from ics.com ([216.112.183.3]:48398 "EHLO ics.com") by oss.sgi.com with ESMTP id ; Wed, 17 Jan 2001 06:56:30 -0800 Received: from ics.com (Ottawa-ppp-198366.sympatico.ca [209.226.116.143]) by ics.com (8.9.0.Beta5/8.9.0.Beta5) with ESMTP id JAA24514 Wed, 17 Jan 2001 09:56:28 -0500 (EST) Message-ID: <3A65B270.E93114C7@ics.com> Date: Wed, 17 Jan 2001 09:55:44 -0500 From: Robert Hartley Organization: ICS X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en-US, en, en-GB, es-ES, ru MIME-Version: 1.0 To: info-inventor@oss.sgi.com Subject: Re: Importers or exporters References: <3A656DC4.A45184C9@visiospace.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi, In addition to Coin importers, you can try the ones that come with Performer. It should read in these files, and then be able to output them in Inventor format. Rob Performer info can be found at: List Archives, FAQ, FTP: http://www.sgi.com/software/performer/ Open Development Project: http://oss.sgi.com/projects/performer/ Submissions: info-performer@sgi.com Admin. requests: info-performer-request@sgi.com Cyril ZEKSER wrote: > Hi all, > > I'm trying to find some tools that can make IV files from 3DS, OBJ or > DXF format. > Is there any tools in the Web that you could give me the URL to ? > > BTW, if there are C++-importers for these file formats, I'll prefer > using that. > > Cyril ZEKSER -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= = Robert Hartley Mail: 201 Broadway = = Central Region Systems Engineer Cambridge, MA 02139 = = Integrated Computer Email: rhartley@ics.com = = Solutions, Inc. Web Site: www.ics.com = = Tech Support: support@ics.com Phone: 800-800-4271 = =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Visit the MotifZone (www.motifzone.org) for info on Motif! From owner-inventor@oss.sgi.com Wed Jan 17 07:23:32 2001 Received: by oss.sgi.com id ; Wed, 17 Jan 2001 07:23:22 -0800 Received: from beton.vrvis.at ([194.152.163.92]:15374 "EHLO beton.vrvis.at") by oss.sgi.com with ESMTP id ; Wed, 17 Jan 2001 07:23:06 -0800 Received: from dustpuppy.br1.vrvis.lan (IDENT:root@dustpuppy.br1.vrvis.lan [10.42.3.2]) by beton.vrvis.at (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id QAA11415; Wed, 17 Jan 2001 16:22:53 +0100 Received: (from honza@localhost) by dustpuppy.br1.vrvis.lan (8.9.3/8.9.3) id QAA12161; Wed, 17 Jan 2001 16:22:53 +0100 Date: Wed, 17 Jan 2001 16:22:52 +0100 From: Jan Prikryl To: Cyril ZEKSER Cc: info-inventor@oss.sgi.com Subject: Re: GLw Library Message-ID: <20010117162252.A12126@dustpuppy> References: <3A0A36B800005B67@webmail.rzp.itesm.mx> <20010115200215.A818@erwin.telekabel.at> <3A65A999.C01DF6A5@visiospace.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A65A999.C01DF6A5@visiospace.com>; from czekser@visiospace.com on St, led 17, 2001 at 03:18:01 +0100 Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Quoting Cyril ZEKSER (czekser@visiospace.com): > I can't compile Mesa files since i've a nvidia GeForce 2 Ultra, > which is not compatable with Mesa !! You do not need to compile Mesa, you shall compile just the GLw library - GLw is just a wrapper adding Motif bindings to the OpenGL "canvas", and it does not require Mesa to be used. You just have to be usre you compiled it with the proper (nVidia) include files and it shall work OK. I can give you a binary if you really need to. -- jan --------------------+------------------------------------------------------ Jan Prikryl | vr|vis center for virtual reality and visualisation | http://www.vrvis.at --------------------+------------------------------------------------------ From owner-inventor@oss.sgi.com Thu Jan 18 12:58:00 2001 Received: by oss.sgi.com id ; Thu, 18 Jan 2001 12:57:50 -0800 Received: from Puccini.ucc.hull.ac.uk ([150.237.196.2]:61643 "HELO mailhub3.hull.ac.uk") by oss.sgi.com with SMTP id ; Thu, 18 Jan 2001 12:57:41 -0800 Received: from mailhub.dcs.hull.ac.uk (actually host amethyst.dcs.hull.ac.uk) by puccini.ucc.hull.ac.uk with ESMTP; Thu, 18 Jan 2001 20:57:05 +0000 Received: from [150.237.92.11] (helo=scarlet.dcs.hull.ac.uk ident=exim) by mailhub.dcs.hull.ac.uk with esmtp (Exim 3.03 #2) id 14JM7F-0001Gs-00 for info-inventor@oss.sgi.com; Thu, 18 Jan 2001 20:57:05 +0000 Received: from cspfh by scarlet.dcs.hull.ac.uk with local (Exim 2.12 #1) id 14JM72-0002L3-00 for info-inventor@oss.sgi.com; Thu, 18 Jan 2001 20:56:52 +0000 Date: Thu, 18 Jan 2001 20:56:52 +0000 (GMT) From: Fotios Hadginikos X-Sender: cspfh@scarlet To: info-inventor@oss.sgi.com Subject: Inventor windows port rendering problems In-Reply-To: <20010117142230.A820@sim.no> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi, I have managed to compile and link the win32 port of Open Inventor. Everything works fine the first time but when the window gets updated (i.e. by anumating the scene or reseizing the window) I lose the lights (I think). For example when a single sphere is used when the program is initially run, the sphere appears normal. When I resize the window (or minimise and restore it). Only the outline of the sphere remains (Like I am drawing a sphere with no lights enabled...). I am using GLUT for opening the window... Can anybody help? Have you seen something similar happening? thanks in advance, Fotis ------------------------------------------------------------------------------- Fotis Hadginikos Visualization and Virtual Environments Research Lab, Department of Computer Science, TEL : 0044-1482-466348 University of Hull, HOME: 0044-1482-302635 Cottingham Road, HU67RX, HULL,UK From owner-inventor@oss.sgi.com Fri Jan 19 05:07:40 2001 Received: by oss.sgi.com id ; Fri, 19 Jan 2001 05:07:31 -0800 Received: from mail.cg.tuwien.ac.at ([128.131.166.76]:15884 "EHLO christl.cg.tuwien.ac.at") by oss.sgi.com with ESMTP id ; Fri, 19 Jan 2001 05:07:12 -0800 Received: from fsck.cg.tuwien.ac.at (TK150125.tuwien.teleweb.at [195.34.150.125]) by christl.cg.tuwien.ac.at (8.9.3/8.9.3) with ESMTP id OAA12865; Fri, 19 Jan 2001 14:06:57 +0100 Message-Id: <5.0.2.1.0.20010119140212.00c4ac10@mail.cg.tuwien.ac.at> X-Sender: hesina@mail.cg.tuwien.ac.at X-Mailer: QUALCOMM Windows Eudora Version 5.0.2 Date: Fri, 19 Jan 2001 14:06:57 +0100 To: Fotios Hadginikos , info-inventor@oss.sgi.com From: Gerd Hesina Subject: Re: Inventor windows port rendering problems In-Reply-To: References: <20010117142230.A820@sim.no> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing At 20:56 18.01.01 +0000, Fotios Hadginikos wrote: >Hi, >I have managed to compile and link the win32 port of Open Inventor. > >Everything works fine the first time but when the window gets updated >(i.e. by anumating the scene or reseizing the window) I lose the lights >(I think). > >For example when a single sphere is used when the program is initially >run, the sphere appears normal. When I resize the window (or minimise and >restore it). Only the outline of the sphere remains (Like I am drawing a >sphere with no lights enabled...). > >I am using GLUT for opening the window... > >Can anybody help? Have you seen something similar happening? Hi, I've received the following note about a glut example. Perhaps it's useful for you.... BTW: If you want to use GLUT in conjunction with OpenInventor try GlutMaster. A link is provided at http://www.cg.tuwien.ac.at/hostings/openinventor/ Kind regards, Gerd Hesina From: frode.brandt@kongsberg-simrad.com X-Lotus-FromDomain: KONGSBERG-MARITIME@S_EXT To: hesina@cg.tuwien.ac.at Date: Fri, 1 Dec 2000 08:10:37 +0100 Subject: OpenInventor for windows - BUG! Hi! Just surfed by opengl.org and found the OIV-page of yours (http://www.cg.tuwien.ac.at/hostings/openinventor/) You've got a link to a glut-sample from SIM there, though this sample has a bug in it.. (at least if you try compiling it using TGS OIV) The sphere get whiter and whiter for each frame...... But if you change SoGroup * root[SCENEWINDOWS]; to SoSeparator * root[SCENEWINDOWS]; etc, it works just great! I've informed Morten Eriksen at SIM about this problem.... Keep up the great work!! Best Regards, Frode Frode Brandt - Development engineer (MSc) =================================================== Company: Kongsberg Simrad A/S Homepage: http://www.kongsberg-simrad.no/ Department: Hydrography Phone direct: +47 33 02 38 69 Fax: +47 33 04 44 24 Email: frode.brandt@kongsberg-simrad.no =================================================== From owner-inventor@oss.sgi.com Wed Jan 24 09:53:37 2001 Received: by oss.sgi.com id ; Wed, 24 Jan 2001 09:53:18 -0800 Received: from access-178.93.rev.fr.colt.net ([213.41.93.178]:53697 "EHLO nyctalop.visiospace.com") by oss.sgi.com with ESMTP id ; Wed, 24 Jan 2001 09:52:51 -0800 Received: from visiospace.com ([10.10.6.66]) by nyctalop.visiospace.com (8.10.2/8.10.2/SuSE Linux 8.10.0-0.3) with ESMTP id f0OIsUN09445 for ; Wed, 24 Jan 2001 19:54:35 +0100 X-Authentication-Warning: nyctalop.visiospace.com: Host [10.10.6.66] claimed to be visiospace.com Message-ID: <3A6F1693.68C8C409@visiospace.com> Date: Wed, 24 Jan 2001 18:53:23 +0100 From: czekser@visiospace.com X-Mailer: Mozilla 4.75 [fr] (X11; U; Linux 2.2.18 i686) X-Accept-Language: fr MIME-Version: 1.0 Newsgroups: comp.graphics.api.inventor To: info-inventor@oss.sgi.com Subject: Problem with OpenInventor and JNI Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi all, I want to start a SoXtExaminerViewer from a native function with JNI. All I get is a segfault when I call SoXt::init(). Is there any method to bypass the call of SoXt::init, with Xt toolkit ??? Cyril Z. From owner-inventor@oss.sgi.com Sun Jan 28 22:11:35 2001 Received: by oss.sgi.com id ; Sun, 28 Jan 2001 22:11:25 -0800 Received: from ems.flashnet.it ([194.247.160.44]:13063 "EHLO relay.flashnet.it") convert rfc822-to-8bit by oss.sgi.com with ESMTP id ; Sun, 28 Jan 2001 22:11:11 -0800 Received: from ip097.pool-05.cyb.it (ip097.pool-05.cyb.it [195.191.4.98]) by relay.flashnet.it (EMS-RELAY/8.10.0) with SMTP id f0T6B3912574 for ; Mon, 29 Jan 2001 07:11:04 +0100 From: daedalus@freemail.it To: info-inventor@oss.sgi.com Subject: observations from a linux user Date: Mon, 29 Jan 2001 07:07:30 +0100 Message-ID: X-Mailer: Forte Agent 1.8/32.548 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8BIT Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing >!! inventor/lib/database/src/so/nodes /usr/bin/g++ -DIRIX_6 -DLIBRARYBUILD -I/usr/X11R6/include -I. -I../../../../../lib/database/include -I../../../../../lib/interaction/include -I../../../../../lib/nodekits/include -I../../../../../libSoXt/include -I../../../../../libFL/src -Inurbs/head -fPIC -O -DNDEBUG -c SoText2.c++ SoText2.c++: In method `SbBool SoBitmapFontCache::convertToUCS(unsigned int, const SoMFString &)': SoText2.c++:780: passing `char **' as argument 2 of `iconv(void *, const char **, size_t *, char **, size_t *)' adds cv-quals without intervening `const' make[5]: *** [SoText2.o] Error 1 Deleting -DIRIX_6 solved my problem, and make went on. I am running Linux on i586, it's of Debian 2.2.16 with XFree 4.0.2 and I use gcc-2.95.2 built from scratch. I have read the previous posts, but I have found that this error still happens as of inventor-2.1.5-6 >!! inventor/libSoXt/GNUmakefile please try to add LLDOPTS += -L../lib/ >!! inventor/doc/man/ivman/GNUmakefile please try to add -L../../..lib/ -L../../../libSoXt/ LLDOPTS += -L../../..lib/ -L../../../libSoXt/ I got problems with makeManDirs and ivman is executed before libinventor.so and libinventorSoXt.so is installed. >!! inventor/apps/demos/textomatic/TextWrapper.c++ maybe it is similar to -DIRIX_6 see above (inventor/lib/database/src/so/nodes/SoText2.c++) maybe #ifdef(s) should be added because I get the same error >!! inventor/apps/samples/widgets/libinventorWidget.a builds correctly, but componentTest gives "segmentation fault" for any widget I try. ----------------------- When I run XFree86 4.0.2 @ 16 bpp and I try a "xwd" on the window where the demo app maze is running I get: X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 91 (X_QueryColors) Value in failed request: 0xffff0440 Serial number of failed request: 158 Current serial number in output stream: 15 I don't think it's a problem regarding maze, because I got the same error with the SceneViewer and ivview. Maybe it's only a problem regarding only me, test and judge. Or maybe I am ignoring something about XFree 4 and GLX, but I had no problem with some glut library demos (i.e. ideas in motion). Of course the problem vanishes when I run the X server @ 24 bpp. From owner-inventor@oss.sgi.com Sun Jan 28 22:32:25 2001 Received: by oss.sgi.com id ; Sun, 28 Jan 2001 22:32:15 -0800 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:38743 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 28 Jan 2001 22:31:58 -0800 Received: from kinabalu.csd.sgi.com (kinabalu.csd.sgi.com [150.166.1.88]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id WAA08758 for ; Sun, 28 Jan 2001 22:41:01 -0800 (PST) mail_from (jlim@kinabalu.csd.sgi.com) Received: by kinabalu.csd.sgi.com (980427.SGI.8.8.8/911001.SGI) id WAA42189; Sun, 28 Jan 2001 22:30:08 -0800 (PST) From: jlim@kinabalu.csd.sgi.com (Jonathan Lim) Message-Id: <200101290630.WAA42189@kinabalu.csd.sgi.com> Subject: Re: observations from a linux user To: daedalus@freemail.it Date: Sun, 28 Jan 2001 22:30:07 -0800 (PST) Cc: info-inventor@oss.sgi.com In-Reply-To: from "daedalus@freemail.it" at Jan 29, 2001 07:07:30 AM X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing On Sun Jan 28 22:07:30 2001, daedalus@freemail.it wrote: > > SoText2.c++: In method `SbBool > SoBitmapFontCache::convertToUCS(unsigned int, const SoMFString &)': > SoText2.c++:780: passing `char **' as argument 2 of `iconv(void *, > const char **, size_t *, char **, size_t *)' adds cv-quals without > intervening `const' > make[5]: *** [SoText2.o] Error 1 We've gone through this before. Due to conflicts between the iconv() declaration on IRIX and various versions of glibc, I've decided to leave the argument passed in as char**. > >!! inventor/libSoXt/GNUmakefile > please try to add > LLDOPTS += -L../lib/ > > >!! inventor/doc/man/ivman/GNUmakefile > please try to add -L../../..lib/ -L../../../libSoXt/ > LLDOPTS += -L../../..lib/ -L../../../libSoXt/ This is not necessary. You should do a 'make install' (see README.FIRST). > >!! inventor/apps/demos/textomatic/TextWrapper.c++ See note about iconv() above. > >!! inventor/apps/samples/widgets/libinventorWidget.a > builds correctly, but componentTest gives "segmentation fault" for any > widget I try. A stack trace would be more informative. > When I run XFree86 4.0.2 @ 16 bpp and I try a "xwd" on the window > where the demo app maze is running I get: > > X Error of failed request: BadValue (integer parameter out of range > for operation) > Major opcode of failed request: 91 (X_QueryColors) > Value in failed request: 0xffff0440 > Serial number of failed request: 158 > Current serial number in output stream: 15 That's probably a xwd bug. Following is an excerpt from the xwd man page for IRIX: Note that on systems with multiple visuals, this can result in xwd failing with protocol errors in XQueryColors, if the visual corresponding to the first installed colormap is different from the visual of the chosen window. Jonathan Lim _ Silicon Graphics _ Mountain View GPS Graphics Computer Systems CA, USA From owner-inventor@oss.sgi.com Mon Jan 29 04:33:37 2001 Received: by oss.sgi.com id ; Mon, 29 Jan 2001 04:33:28 -0800 Received: from access-178.93.rev.fr.colt.net ([213.41.93.178]:28970 "EHLO nyctalop.visiospace.com") by oss.sgi.com with ESMTP id ; Mon, 29 Jan 2001 04:33:06 -0800 Received: from visiospace.com ([10.10.6.66]) by nyctalop.visiospace.com (8.10.2/8.10.2/SuSE Linux 8.10.0-0.3) with ESMTP id f0TDYMN03375 for ; Mon, 29 Jan 2001 14:34:22 +0100 X-Authentication-Warning: nyctalop.visiospace.com: Host [10.10.6.66] claimed to be visiospace.com Message-ID: <3A75633C.51806063@visiospace.com> Date: Mon, 29 Jan 2001 13:34:04 +0100 From: czekser@visiospace.com X-Mailer: Mozilla 4.75 [fr] (X11; U; Linux 2.2.18 i686) X-Accept-Language: fr MIME-Version: 1.0 To: info-inventor@oss.sgi.com Subject: Problem refreshing changing selection Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-inventor@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;info-inventor-outgoing Hi, I'm using a SoFieldSensor attached to a global field, which is called when I changed the field. In the CB function I toggle the selected state of a node. The node is under a SoSelection node, and the redrawOnSelectionChange is properly set (since I can select node and I see the refreshing with the mouse pointer). But the node is not refreshed within the CB (just a trace tells me the node changed selection state), but only when I move the Camera. And furthermore, When I click on the displayed node, the state toggles correctly, but it seems the state of the node set within the callback is the only one drawn, ie, when the node is selected within the callback, it stays selected even if I click or move until I deselect it in the CB. I don't know if I'm doing right there ? Cyril ZEKSER